Eco-friendly approach for leaching out heavy metals from sewage sludge

Sewage sludge contains rich organic matter and nutrients essential for the growth of plants but the presence of toxic heavy metals restricts its land application. To overcome this, the study aims an eco-friendly approach for leaching out heavy metals. Sewage sludge from sewage treatment plant, Chennai, India was characterised. The analysis of total heavy metal concentration was done by digesting in nitric acid and different forms were extracted by community bureau of reference sequential method. Heavy metals: As, Cd, Cr, Cr, Ni, Pb and Zn were determined using inductively coupled plasma optical emission spectrometry Perkin Elmer Optima 5300 DV. The experimental set-up for heavy metal leaching was held for five consecutive days at different concentrations of humic acid (0.1%, 0.5% and 1%) at varied pH (5–9). Results revealed that at the end of fifth day at pH 8, 1% humic acid is capable of leaching out 75.5% cadmium, 66.0% nickel, 52.0% lead, 51.2% zinc, 31.2% copper and 8.5% cadmium from sewage sludge. Statistically positive correlation (0.7088) existed between the percentage of heavy metals leached out and the sum of soluble and reducible fractions. Thus, from ecological point of view, humic acid can be used to leach out heavy metals from sewage sludge serving the need in restoration of soil fertility upon land application.     

Utilization of aluminum hydroxide waste generated in fluoride adsorption and coagulation processes for adsorptive removal of cadmium ion

Although Al-based coagulation and adsorption processes have been proved highly efficient for fluoride (F) removal, the two processes both generate large amount of Al(OH)₃ solid waste containing F (Al(OH)₃-F). This study aimed to investigate the feasibility of utilizing Al(OH)₃-F generated in Al(OH)₃ adsorption (Al(OH)₃-F_ads) and coagulation (Al(OH)₃-F_coag) for the adsorption of cadmium ion (Cd(II)). The adsorption capacity of Al(OH)₃-F_ads and Al(OH)₃-F_coag for Cd(II) was similar as that of pristine aluminum hydroxide (Al(OH)₃), being of 24.39 and 19.90 mg·g^–1, respectively. The adsorption of Cd(II) onto Al(OH)₃-F_ads and Al(OH)₃-F_coag was identified to be dominated by ion-exchange with sodium ion (Na⁺) or hydrogen ion (H⁺), surface microprecitation, and electrostatic attraction. The maximum concentration of the leached fluoride from Al(OH)₃-F_ads and Al(OH)₃-F_coag is below the Chinese Class-I IndustrialWastewater Discharge Standard for fluoride (<10 mg·L^–1). This study demonstrates that the Al(OH)₃ solid wastes generated in fluoride removal process could be potentially utilized as a adsorbent for Cd(II) removal.     

Speciation of particulate trace metals in sediments of Anarbe reservoir∗

Total concentration and chemical forms of heavy metals in samples of sediment from a drinking water reservoir have been analysed. The result of total metal contest shows Fe and Mn concentration increase along the reservoir, from 4.4% in Fe and 0.07% in Mn in the end part to 6.4% Fe and 0.22% Mn at the dam. However, a decrease in organic matter along the reservoir is observed. In order to test the accuracy of the digestion methods used, a standard reference material was also analysed.

Trace metal concentrations, with exception of Cadmium, Pb and Mn, found in fraction 5 are higher than those observed in the others extractions, Fe, Ni, Zn, Cr and Cu content in non‐residual fraction is found mainly in moderately reducible fraction, but the percentage of this fraction in each metal is very different.     

Medium ‐ pressure ‐ liquid ‐ extraction (MPLE) of selected polychlorinated biphenyls from soil (MPLE II) 1

The extraction of PCBs from spiked soils using the Medium‐Pressure Liquid‐Extraction method showed good recovery rates. Comparison of MPLE and Soxhlet extraction of naturally contaminated soil showed similar results. However, too large quantities of solvents have to be used in MPLE procedure and the elution profile makes it unlikely, that the aspired separation from PAHs would be sufficient.     

高瓦斯低透气性煤层水力压裂技术的试验研究

由于某矿煤层透气性低、瓦斯含量高,现有瓦斯抽采技术不能满足瓦斯抽采的需要,因而采用了水力压裂技术增透措施进行试验。通过该矿11-2煤层的工业试验,分析了水力压裂技术的参数选择、压裂范围、煤层透气性、压裂后抽采效果等。试验研究得出,经过水力压裂,煤层的透气性提高了2246倍,煤层瓦斯抽采效率也大幅提高     

Speciation of heavy metals in sediments from the Scheldt estuary,Belgium

A simple three-step sequential extraction procedure was applied to study the speciation of heavy metals in sediment from Scheldt estuary, and their relationship to sediment grain size and organic matter content. The sedimentary metal content was fractionated into carbonate and exchangeable, metals bound to organic matter and residual fractions. Sedimentary total metal content was also determined using an industrial microwave (ETHOS 900) HF/HNO₃ extraction method. The extracts were analysed for metals using inductively coupled plasma atomic emission spectrometry. The bioavailable fraction (exchangeable and metals bound to organic matter) comprised less than the other forms. Residue metals were the dominant form of metals in almost all studied sites. The average total metal content for the studied sites decreased in the order Fe>Cr>Cu>Co>Zn>Pb>Cd. Based on average values for the studied sites, the highest bioavailable metals in sediments were Cd (38%) from Westkapelle, Zn (17%) from Yerseke, Co (12%) from Domburg, Cr (9%) from Vlissingen, Fe and Pb each (2%) from Yerseke, and Cu (1%) from Domburg. Metal recovery was good, with<10% difference between the total metal recovered through the extractant steps and the total metal determined using HF/HNO₃ extract.     

Ligand-less in situ surfactant-based solid phase extraction for preconcentration of silver from natural water samples prior to its determination by atomic absorption spectroscopy

A simple and rapid ligand-less in situ surfactant-based solid phase extraction method for preconcentration of silver from water samples is developed. In this method, a cationic surfactant containing a proper alkyl group (n-dodecyltrimethylammonium bromide) is dissolved in the aqueous sample and then a proper ion-pairing agent (ClO₄^?) is added. Due to the interaction between surfactant and ion-pairing agent, solid particles are formed and used for adsorption of silver carbonate. After centrifugation, the sediment is dissolved in 2.0 mL 1 M HNO₃ in ethanol and then aspirated directly into the flame atomic absorption spectrometer. Variables affecting the extraction efficiencies such as pH, concentrations of surfactant and CO₃^2?, ion pair concentration, and extraction time, are optimized. Under such conditions, the calibration curve is linear from 3 to 700 μg L^?1. Detection limit is 1.1 μg L^?1 with an enrichment factor of 37. The relative standard deviation for eight replicate measurements of 100 μg L^?1 is 2.1%. The method has been applied for the determination of silver in water samples.     

Preconcentration of samarium with modified yeast cells for its determination by atomic emission spectroscopy

A chelating-modified biosorbent is produced by coupling of a dye, procion red, to yeast cells. The resulting modified cells have been characterized by Fourier transform infrared, elemental analysis and thermogravimetric analysis and studied for preconcentration and determination of trace Sm(III). The optimum pH value for sorption of the samarium ions is 6.2. The sorption capacity of functionalized modified yeast cells is 7.2 mg g^?1. Recovery was 99% when Sm(III) was eluted with an aqueous solution of 0.1 mol L^?1 ethylenediaminetetraacetic acid. Scatchard analysis suggested that binding sites were homogeneous. The equilibrium data were analyzed using Langmuir, Freundlich, Temkin, and Redlich–Peterson isotherm models, and the respective constants were determined as 1.0 (L mg^?1), 2.9 [(mg g^?1) (L mg^?1)^1/n], 2.4 × 10⁸ (L g^?1), and 30 (dm³ g^?1) at 20 °C. The method was applied for an Sm(III)-containing sample of ceramic industry effluent.     

A comparative study of three different methods for the sequential extraction of heavy metals in soil

Three different methods for the sequential extraction of heavy metals from soil (viz those of Tessier et al. (A. Tessier, P.G. Campbell and N. Bisson (1979). Anal. Chem., 51, 844.), Sposito et al. (G. Sposito, L.J. Lund and A.C. Chang (1989). Soil. Sci. Soc. Am. J., 46, 260.) and Mann and Ritchie (S.S. Mann and G.S.P. Ritchie (1993). Aust. J. Soil Res., 31, 255.)) were examined in terms of the distribution of Cu, Zn and Pb in the soil phases and the bioavailability of these elements in soil. To this end, several samples of soils polluted with metals from a copper mine were fractionated by using the three studied methods and analyzed by atomic absorption spectrometry. The results revealed differences in extraction efficiency among the methods due to the extractant used, or its concentration, and to the soil/solution ratio. The three methods were found to provide accurate heavy metal background contents. However, the method of Tessier et al. is to be preferred for quantifying increased levels of heavy metals on account of its high extraction power.     

Solid phase extraction of trace metals from environmental samples using Amberlite XAD-7 loaded with 2-hydroxy-propiophenone-4-phenyl-3-thiosemicarbazone and determination by inductively coupled plasma–atomic emission spectrometry

A method for the solid phase extraction of trace metals, namely Co, Cu, Pb, Ni and Zn, from environmental and biological samples using column Amberlite XAD-7 loaded with 2-hydroxy-propiophenone-4-phenyl-3-thiosemicarbazone (HPPPTSC) and determination by inductively coupled spectrometry (ICP–AES) has been developed. The reagent has the capacity to form chelate complexes with the metals because of three binding sites in the reagent molecule. The optimum experimental conditions for the quantitative sorption of five metals, pH, effect of flow rate, concentration of eluent, sorption capacity and the effect of diverse ions on the preconcentration of analytes have been investigated. The sorption capacity of the resin has 83, 127, 35, 88 and 85?µmol?g^?1 for Co²⁺, Cu²⁺, Pb²⁺, Ni²⁺ and Zn²⁺, respectively. The preconcentration factors for Co²⁺, Cu²⁺, Pb²⁺, Ni²⁺ and Zn²⁺ were 100, 110, 120, 140 and 150, respectively. The accuracy of the proposed procedure was evaluated by standard reference materials. The achieved results were in good agreement with certified values. The proposed method was applied for the determination of trace metals in river water and plant leaves.