金属基复合材料及其超塑性技术的发展

颗粒或晶须增强铝基复合材料具有优良的性能。目前其制备工艺主要采用粉末冶金法和挤压铸造法。这类铝基复合材料已经有许多应用实例。铝基复合材料超塑性是近年来开发的新技术,可解决其成形性差的加工难题,扩大其应用领域。     

Effects of environmental factors on the production and release of matrix-bound phosphine from lake sediments

Effects of pH, temperature, and oxygen on the production and release of phosphine in eutrophic lake sediments were investigated under laboratory tests. Results indicated that the elimination of matrix-bound phosphine was accelerated under initial pH 1 or 12. Phosphine levels could reach maximum under initial pH 10. The contents of phosphine increased with the addition of alkali under pH 4–12. The rates of phosphine production and release from lake sediments varied with temperature. 20°C was the most favorable temperature for the production of matrix-bound phosphine. Oxygen showed little effect on matrix-bound phosphine. Matrix-bound phosphine concentrations in lake sediments were concluded to be dependent on a balance of natural generation and depletion processes. Translated from Acta Scientise Circumstantiae, 2005, 25(5): 681–685 [译自: 环境科学学报]     

钯离子液相催化氧化低浓度磷化氢

采用Pd^2＋液相催化氧化低浓度PH3,考察了Pd^2＋浓度、O2体积分数、PH3质量浓度、混合气流量、反应温度等因素对Pd^2＋吸收液去除低浓度PH3效果的影响。实验结果表明,采用10mL Pd^2＋浓度为0．112mol／L的水溶液作为吸收液净化含低浓度PH3的混合气,在反应温度22℃、O2体积分数5％、PH3质量浓度850mg／m^3、混合气流量190mL／min的条件下,印min之内PH3去除率保持在90％以上。Pd^2＋浓度越高、O2体积分数越大、反应温度越高,PH3去除率越高;混合气流量越大,PH3去除率越低;反应温度越低、O2体积分数越大,PH3去除率的下降速率越小。     

郑州市民运会期间大气PM2.5改善效果评估

利用2019年8月5日至9月30日大气污染物和颗粒物组分在线数据,评估郑州市少数民族运动会空气质量管控效果.根据政府管控措施的实施时间,将研究时期分为管控前(8月5～24日)、管控中(8月25日至9月18日)和解除管控后(9月19～30日).相较管控前,管控中PM_2.5平均浓度增加2.3μg·m^-3,解除管控后PM_2.5的浓度增加了11.7μg·m^-3,解除管控后PM_2.5浓度增幅高于管控中,表明管控措施对颗粒物有显著的减排效果.从颗粒物组分来看,研究期间郑州市主要组分依次是有机物、硝酸根、铵根、硫酸根和地壳元素.相比于管控前,管控期间PM_2.5组分中有机物和硝酸根占比分别上升3.9%和0.9%,硫酸根、铵根和地壳元素的占比下降了1.1%、 1.9%和2.2%.利用正定矩阵因子分解法解析颗粒物来源,结果表明二次硫酸、二次硝酸、二次有机气溶胶、机动车源、工艺过程源、扬尘和燃煤是PM_2.5主要来源.管控对一次源中的扬尘、燃煤和工业效果显著...     

典型行业再利用土壤重金属含量分布、来源解析及生态风险评价

为深入探究典型行业再利用土壤重金属污染特征及生态风险状况,基于上海市嘉定区49个地块315个不同深度剖面土壤样品数据,采用地累积指数和潜在生态风险指数评估Cd、Pb、Cu、Zn、Ni、Hg和As这7种重金属含量特征和潜在生态风险程度,并利用源解析受体模型（APCS-MLR）和正定矩阵因子分解模型（PMF）解析其污染来源.结果表明：①研究区土壤中除As外,其余重金属均不同程度超过上海市土壤背景值,表层土壤中Cd、Pb、Cu、Zn、Ni和Hg含量分别是背景值的3.54、2.34、2.91、1.20、3.75和4.40倍;7种重金属含量随着土壤垂直剖面深度的增加逐渐降低,重金属在表层土壤中存在一定程度的富集,人类活动影响了重金属在土壤中的分布规律.②研究区内APCS-MLR和PMF两种受体模型均识别出土壤重金属4种主要来源,源1（Cu、Zn和Pb）为金属制品和汽车制造混合源,源2（Ni和Cd）为电镀企业来源,源3（Hg）主要为化工企业来源,源4（As）为自然源,两种受体模型结合运用,进一步提高源解析的精准度和可信度.③地累积指数由大到小表现为：Hg（1.54）>Ni（1.32）>Cd（1.21）>Cu（0.96）>Pb（0.64）>Zn（-0.33）>As（-1.02）;潜在生态风险指数结果显示,研究区综合潜在生态风险指数RI值在32.50~4 910.97,均值为321.40,整体呈现较强潜在生态风险,再开发利用工业场地土壤中重金属Hg、Ni和Cd的污染值得进一步关注.     

水淬渣人工湿地强化除磷作用研究

研究了水淬渣的磷吸附-解吸效果,构建了以水淬渣为主要基质的模拟垂直流人工湿地系统,分析了水力停留时间(HRT)和污染负荷变化对污水中磷去除的影响,探讨了湿地上行、下行流单元各层基质的除磷贡献.结果表明,水淬渣基质的磷饱和吸附量为3 333 mg.kg-1,其水溶性钙含量为0.084%,pH值为7.54,适合作为湿地除磷基质.HRT与磷除去率呈正相关,当HRT从1 d缩短为0.5 d时,TP去除率降低5.9%~4.7%,当HRT从2 d缩短为1 d时,TP去除率降低2.4%~4.7%,HRT为1 d条件下,水淬渣湿地的磷去除率>85%,说明无限延长HRT无益于强化除磷,适宜的HRT为1 d.在进水浓度稳定的条件下,进水污染负荷与磷去除率呈负相关,当污染负荷范围在12.2~36.8 g.(m2.d)-1时,水淬渣湿地的磷除去率可维持在85%,当污染负荷达到48.9 g.(m2.d)-1后,水淬渣湿地的磷除去率下降至65%,当污染负荷<36.8 g.(m2.d)-1时,水淬渣湿地的磷去除率>82%,说明高污染负荷可抑制基质表面及孔隙中Ca、Al等吸附磷的活跃位点,适宜的进水污染负荷为24.5~36.8g.(m2.d...     

Implications of different population model structures for management of threatened plants

Population viability analysis (PVA) is a reliable tool for ranking management options for a range of species despite parameter uncertainty. No one has yet investigated whether this holds true for model uncertainty for species with complex life histories and for responses to multiple threats. We tested whether a range of model structures yielded similar rankings of management and threat scenarios for 2 plant species with complex postfire responses. We examined 2 contrasting species from different plant functional types: an obligate seeding shrub and a facultative resprouting shrub. We exposed each to altered fire regimes and an additional, species‐specific threat. Long‐term demographic data sets were used to construct an individual‐based model (IBM), a complex stage‐based model, and a simple matrix model that subsumes all life stages into 2 or 3 stages. Agreement across models was good under some scenarios and poor under others. Results from the simple and complex matrix models were more similar to each other than to the IBM. Results were robust across models when dominant threats are considered but were less so for smaller effects. Robustness also broke down as the scenarios deviated from baseline conditions, likely the result of a number of factors related to the complexity of the species’ life history and how it was represented in a model. Although PVA can be an invaluable tool for integrating data and understanding species’ responses to threats and management strategies, this is best achieved in the context of decision support for adaptive management alongside multiple lines of evidence and expert critique of model construction and output.     

Organically bound tritium (OBT) for various plants in the vicinity of a continuous atmospheric tritium release

In order to quantify tritium impact on the environmental, we studied vegetation continuously exposed to a tritiated atmosphere. We chose lichens as bio-indicators, trees for determination of past tritium releases of the Valduc Centre, and lettuce as edible vegetables for dose calculation regarding neighbourhood. The Pasquill and Doury models from the literature were tested to estimate tritium concentration in the air around vegetable for distance from the release point less than 500m. The results in tree rings show that organically bound tritium (OBT) concentration was strongly correlated with tritium releases. Using the GASCON model, the modelled variation of OBT concentration with distance was correlated with the measurements. Although lichens are recognized as bio-indicators, our experiments show that they were not convenient for environmental surveys because their age is not definitive. Thus, tritium integration time cannot be precisely determined. Furthermore, their biological metabolism is not well known and tritium concentration appears to be largely dependent on species. An average conversion rate of HTO to OBT was determined for lettuce of about 0.20-0.24%h(-1). Nevertheless, even if it is equivalent to values already published in the literature for other vegetation, we have shown that this conversion rate, established by weekly samples, varies by a factor of 10 during the different stages of lettuce development, and that its variation is linked to the biomass derivative.     

经济发达地区土地利用结构变化预测 --以江苏省江阴市为例

结构决定功能，把握土地利用结构变化的趋势，调整社会经济发展的策略。优化土地利用结构是土地可持续利用的关键。以经济发达地区江苏省江阴市为例，运用马尔柯夫链的理论与方法，构建土地利用结构转移的概率矩阵，预测江阴市2005年和2010年的土地利用结构，并分析其变化特征，以此来研究经济发达地区近期内可能的土地利用结构变化规律。模拟结果表明，经济发达地区土地利用结构变化存在着非农化趋势加快．农地数量减少加速的现象，如果为保证耕地的数量平衡，则可能导致农地内部结构极其不合理。根据研究结果，提出适当释放农地，促进经济发展；运用经济杆杠，提高非农用地利用效率；重视耕地质量，改善生态环境的政策建议。     

川西高原河流水体CDOM的光化学降解特性

川西高原部分河流溶解性有机碳(DOC)含量极高,因有色溶解性有机质(CDOM)具有独特的光学特性,其光降解特征与规律对于分析高寒区天然水体DOC动态及区域水-陆碳循环具有重要的环境意义.本文选取川西高原两种主要地貌类型的河流共5条,即高山峡谷区河流杂谷脑河、抚边河及岷江,丘状高原区河流白河、黑河,对河流水体CDOM三维荧光光谱(EEMs)与紫外-可见光吸收光谱(UV-Vis)采用平行因子分析(PARAFAC)与二维相关光谱(2D-COS)进行分析.结果表明:①白河和黑河CDOM的5 d降解率分别为64. 85%和63. 43%,光降解速率常数分别为0. 167 d-1和0. 173 d-1;抚边河CDOM浓度低(0. 71 m-1)光降解现象不明显,杂谷脑河和岷江CDOM光降解行为较为复杂;②在光降解过程中,除岷江外其余4条河流荧光溶解性有机质(FDOM)内源特征(FI)逐渐减弱,黑河和白河CDOM芳香性、疏水性特征(SUVA254和SUVA260)及腐殖化程度(HIXa)逐渐降低;③川西高原5条河流中FDOM组分均呈2类4个组分,即C1(275/310 nm,类酪氨酸)、C2 [280(250)/400 nm,UVA类腐殖质]和C3(255/440 nm,UVA类腐殖质)、C4[270(360)/492 nm,UVA类腐殖质],类腐殖质FDOM较易光降解;④5条河流中UVA类腐殖质FDOM(尤其是500 nm发射波段)光降解反应先于类酪氨酸物质;丘状高原河流中UVA类腐殖质FDOM对于光照的敏感度大于高山峡谷区河流;⑤白河的主成分分析中识别出了2个因子,解释了这些参数变化的87. 28%,反映了光降解过程对于CDOM特征、荧光组分等方面的影响.