Stand-alone wind power system with battery/supercapacitor hybrid energy storage

This paper presents a stand-alone wind power system with battery/supercapacitor hybrid energy storage. A stand-alone wind power system mainly consists of a wind turbine, a permanent magnet synchronous generator, hybrid energy storage devices based on a vanadium redox flow battery and a supercapacitor, an AC/DC converter, two bidirectional DC/DC converters, a DC/AC converter and a variable load. Several control strategies for the stand-alone wind power system are involved such as a maximum power point tracking (MPPT) control, a vanadium redox flow battery charge/discharge control and a supercapacitor charge/discharge control. The proposed MPPT control combines a sliding mode control with an extreme search control to capture maximum wind energy. This strategy avoids the necessity of measuring wind velocity, obtaining models or parameters of the wind turbine and calculating the differentials of the power generated from the wind power system and from the speed of the generator. The battery charge/discharge control maintains a constant DC bus voltage. When the battery charging/discharging current reaches the setting threshold, the charge/discharge control of the supercapacitor is triggered to limit the charging/discharging current of the battery. The simulation results show that the proposed method can rapidly respond to variations in wind velocity and load power.     

改性糠醛渣吸附脱硫废水中钙离子

石灰石-石膏法烟气脱硫技术中石灰石利用率低导致钙流失严重,为实现脱硫废水中Ca2+的资源化利用,进行糠醛渣改性和Ca2+的吸附特性研究。实验结果表明,利用H3PO4改性后的糠醛渣对脱硫废水中Ca2+具有较高的吸附率;在振荡的前30 min吸附率上升极快,至90 min时基本达到平衡吸附量;对Ca2+浓度对吸附率影响研究结果表明,平衡吸附量与平衡浓度关系符合Langmuir等温吸附方程;在初始Ca2+浓度为300 mg/L的溶液中加入3 g吸附剂,温度30℃条件下振荡90 min,平衡吸附量为8.41 mg/g。     

基于正交实验的面粉爆炸特性研究

为探究面粉爆炸实验中粉尘质量浓度、点火能量、点火延迟时间对面粉爆炸的影响,采用正交实验法并利用20 L球形爆炸测试装置比较研究了粉尘质量浓度、点火延迟时间以及点火能对面粉爆炸的影响程度.结果表明:对最大爆炸压力影响最为显著的因素是点火延迟时间,对最大爆炸指数影响最为显著的因素是粉尘质量浓度;在实验浓度范围内,存在最佳实...     

利用烧结炼铁工艺环保处理铬渣

论述了铬渣的产生、组成、特性,利用冶金生产中的烧结炼铁生产工艺对其进行解毒的机理、配加处理铬渣的工艺流程、配加比例和对烧结矿生产工艺参数的影响情况,利用该法对其解毒处理的优势,及解毒处理中防止二次污染和个人防护措施.     

基于GIS的可视化土质边坡稳定性分析系统研究

结合GIS空间数据分析能力与极限平衡法开发了可视化的土质边坡稳定性分析系统GiSlope,介绍了边坡几何模型、外荷载与加筋结构模型、滑动面及地下水位线模型等分析模型的可视化建立过程,阐述了计算分析的设定、任意形状滑动面土条条分方法以及计算参数的确定方法。通过对几个典型实例的分析与国内外商业软件计算结果的对比,验证了系统计算的正确性和可靠性。     

毛细管气相色谱法测定烟草中有机氯农药残留

研究了烟草中六六六及滴滴涕异构体含量的气相色谱分析方法.样品以石油醚 丙酮在索氏提取器中提取,提取液以浓硫酸净化.采用DB-5弹性石英毛细管柱分离样品,GC-ECD检测农药六六六、滴滴涕的残留量.方法的线性范围为2.27×10-13～7.66×10-11g;最小检测量为1.3×10-8～3.0×10-7 μg,加标平均回收率为95.3%～103.3%,RSD为2.8%～4.5%.     

Penicillin fermentation residue biochar as a high-performance electrode for membrane capacitive deionization

● We have provided an activated method to remove the toxicity of antibiotic residue. ● PFRB can greatly improve the salt adsorption capacity of MCDI. ● The hierarchical porous and abundant O/N-doped played the key role for the high-capacity desalination. ● A new field of reuse of penicillin fermentation residue has been developed. Membrane capacitive deionization (MCDI) is an efficient desalination technology for brine. Penicillin fermentation residue biochar (PFRB) possesses a hierarchical porous and O/N-doped structure which could serve as a high-capacity desalination electrode in the MCDI system. Under optimal conditions (electrode weight, voltage, and concentration) and a carbonization temperature of 700 °C, the maximum salt adsorption capacity of the electrode can reach 26.4 mg/g, which is higher than that of most carbon electrodes. Furthermore, the electrochemical properties of the PFRB electrode were characterized through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) with a maximum specific capacitance of 212.18 F/g. Finally, biotoxicity tests have showed that PFRB was non-biotoxin against luminescent bacteria and the MCDI system with the PFRB electrode remained stable even after 27 adsorption–desorption cycles. This study provides a novel way to recycle penicillin residue and an electrode that can achieve excellent desalination.     

Development of an analytical method for analysis of flubendiamide,des-iodo flubendiamide and study of their residue persistence in tomato and soil

Flubendiamide is a new insecticide that has been found to give excellent control of lepidopterous pests of tomato. This study has been undertaken to develop an improved method for analysis of flubendiamide and its metabolite des-iodo flubendiamide and determine residue retention in tomato and soil. The analytical method developed involved extraction of flubendiamide and its metabolite des-iodo flubendiamide with acetonitrile, liquid-liquid partitioning into hexane-ethyl acetate mixture (6:4, v v^?1) and cleanup with activated neutral alumina. Finally the residues were dissolved in gradient high pressure liquid chromatography (HPLC) grade acetonitrile for analysis by HPLC. The mobile phase, acetonitrile-water at 60:40 (v v^?1) proportion and the wavelength of 235 nm gave maximum peak resolution. Using the above method and HPLC parameters described, nearly 100 % recovery of both insecticides were obtained. There was no matrix interference and the limit of quantification (LOQ) of the method was 0.01 mg kg^?1. Initial residue deposits of flubendiamide on field-treated tomato from treatments @ 48 and 96 g active ingredient hectare^?1 were 0.83 and 1.68 mg kg^?1,respectively. The residues of flubendiamide dissipated at the half-life of 3.9 and 4.4 days from treatments @ 48 and 96 g a.i. ha^?1, respectively and persisted for 15 days from both the treatments. Des-iodo flubendiamide was not detected in tomato fruits at any time during the study period. Residues of flubendiamide and des-iodo flubendiamide in soil from treatment @ 48 and 96 g a.i. ha^?1 were below detectable level (BDL, < 0.01 mg kg^?1) after 20 days. Flubendiamide completely dissipated from tomato within 20 days when the 480 SC formulation was applied at doses recommended for protection against lepidopterous pests.     

Sugarcane vinasse: Environmental implications of its use

The inadequate and indiscriminate disposal of sugarcane vinasse in soils and water bodies has received much attention since decades ago, due to environmental problems associated to this practice. Vinasse is the final by-product of the biomass distillation, mainly for the production of ethanol, from sugar crops (beet and sugarcane), starch crops (corn, wheat, rice, and cassava), or cellulosic material (harvesting crop residues, sugarcane bagasse, and wood). Because of the large quantities of vinasse produced, alternative treatments and uses have been developed, such as recycling of vinasse in fermentation, fertirrigation, concentration by evaporation, and yeast and energy production. This review was aimed at examining the available data on the subject as a contribution to update the information on sugarcane vinasse, from its characteristics and chemical composition to alternatives uses in Brazil: fertirrigation, concentration by evaporation, energy production; the effects on soil physical, chemical and biological properties; its influence on seed germination, its use as biostimulant and environmental contaminant. The low pH, electric conductivity, and chemical elements present in sugarcane vinasse may cause changes in the chemical and physical–chemical properties of soils, rivers, and lakes with frequent discharges over a long period of time, and also have adverse effects on agricultural soils and biota in general. Thus, new studies and green methods need to be developed aiming at sugarcane vinasse recycling and disposal.     

Limitations in the determination of maximum residue limits and highest residues of pesticides: Part I

The pesticide usages are controlled by comparing residue concentrations in treated commodities to legally permitted maximum levels (MRLs) determined based on supervised trials designed to reflect likely maximum residues occurring in practice following authorised use. The number of trials available may significantly affect the accuracy of estimated maximum residues. We conducted a study with synthetic lognormal distributions with mean of 1 and standard deviations of 0.8 and 1.0, which reflect the residue distributions observed in practice. The likely residues in samples were modelled by drawing random samples of size 3, 5, 10 and 25 from the synthetic populations. The results indicate that the estimations of highest residues (HR), used for calculation of short-term intake, and the MRLs, serving as legal limits, are very uncertain based on 3–5 trials indicated by the calculated HR_0.975/HR_0.025 and MRL_0.975/MRL_0.025 ratios of 12 and 9, and 13 and 10, respectively, which question the suitability of such trials for the intended purpose. As the 95% range of HR and MRL rapidly decreases with number of trials, ideally ≥15 but minimum 6–8 trials should be used for estimation of HR and MRL according to the current typical practice of Codex Alimentarius.