无过氧化氢添加Fenton氧化法降解有机物的可行性研究

Fenton反应可以氧化分解有机物,在反应中的关键氧化剂羟基自由基(HO·)是通过亚铁离子与过氧化氢作用生成的,因此,传统的Fenton氧化必须由外部添加过氧化氢.研究了一种新的方法,即采用Nafion膜固定化亚铁离子,并通过光催化反应提供Fenton氧化所需的过氧化氢,使得Fenton反应在不添加过氧化氢的条件下也能够连续进行.结果表明,以甲酸为代表有机物,该方法可以在不添加过氧化氢的条件下起到分解甲酸的作用.而且,通过对负载亚铁离子Nafion膜的再生,可以使该方法的降解能力保持在稳定的范围.     

Mitochondrial toxicity and in vitro biological effects of ambient PM2.5 from an urban site in China

Abstract

The roles of PM_2.5-induced mitochondrial damage and oxidative stress on mast cell degranulation were examined in vitro. Mast cells were treated with suspensions of PM_2.5 in Dulbecco’s modified Eagle’s medium at concentrations from 25 to 200?mg/L in the absence or presence of 10?mmol/L N-acetyl-L-cysteine. Biological effects and mitochondrial function were assessed by determining cell viability, β-hexosaminidase release, interleukin-4 secretion, reactive oxygen species generation, adenosine triphosphate production, potential alteration of mitochondrial membrane, and activities of mitochondrial electron transport chain complexes I and III. Exposure of mast cells to PM_2.5 induced reduction of adenosine triphosphate production, collapse of mitochondrial membrane potential, and inhibition of the activity of complex III. Co-treatment of mast cells exposed to PM_2.5 with N-acetyl-L-cysteine attenuated cytotoxicity and the production of reactive oxygen species, and decreased the release of β-hexosaminidase and interleukin-4. Evidently, PM_2.5-induced oxidative stress plays an essential role in mitochondrial toxicity and mast cell activation.     

Metabolic uncoupler, 3,3′,4′,5-tetrachlorosalicylanilide addition for sludge reduction and fouling control in a gravity-driven membrane bioreactor

• Effects of metabolic uncoupler TCS on the performances of GDMBR were evaluated. • Sludge EPS reduced and transformed into dissolved SMP when TCS was added. • Appropriate TCS increased the permeability and reduced cake layer fouling. • High dosage aggravated fouling due to compact cake layer with low bio-activity. The gravity-driven membrane bioreactor (MBR)system is promising for decentralized sewage treatment because of its low energy consumption and maintenance requirements. However, the growing sludge not only increases membrane fouling, but also augments operational complexities (sludge discharge). We added the metabolic uncoupler 3,3′,4′,5-tetrachlorosalicylanilide (TCS) to the system to deal with the mentioned issues. Based on the results, TCS addition effectively decreased sludge ATP and sludge yield (reduced by 50%). Extracellular polymeric substances (EPS; proteins and polysaccharides) decreased with the addition of TCS and were transformed into dissolved soluble microbial products (SMPs) in the bulk solution, leading to the break of sludge flocs into small fragments. Permeability was increased by more than two times, reaching 60–70 L/m²/h bar when 10–30 mg/L TCS were added, because of the reduced suspended sludge and the formation of a thin cake layer with low EPS levels. Resistance analyses confirmed that appropriate dosages of TCS primarily decreased the cake layer and hydraulically reversible resistances. Permeability decreased at high dosage (50 mg/L) due to the release of excess sludge fragments and SMP into the supernatant, with a thin but more compact fouling layer with low bioactivity developing on the membrane surface, causing higher cake layer and pore blocking resistances. Our study provides a fundamental understanding of how a metabolic uncoupler affects the sludge and bio-fouling layers at different dosages, with practical relevance for in situ sludge reduction and membrane fouling alleviation in MBR systems.     

烟气脱碳技术进展

介绍了吸收法、吸附法、低温法、膜分离法回收烟道气中CO2的研究和应用现状,并对这些方法进行了比较,指出了适用范围。     

有机废气中VOC的回收方法

介绍了炭吸附法、冷凝法和膜分离法回胥机废报中ＶＯＤ的原理、工艺流程和工业应用情况，并对这些方法进行了比较，指出了适用范围。     

TiO_2光催化对微滤去除腐殖酸的膜污染控制研究

着重研究了不同紫外灯光源和照射时间条件下,TiO_2光催化(PCO)对微滤去除腐殖酸过程中的膜污染控制,并探讨了膜污染的控制机理。研究结果表明,TiO_2光催化能有效提高微滤对腐殖酸的去除,同时降低膜通量的下降,起到有效控制膜污染的作用。进一步的实验分析表明,TiO_2光催化控制膜污染的主要机理在于将腐殖酸降解为易于被TiO_2吸附的小分子量物质,吸附腐殖酸降解产物后的TiO_2聚合颗粒粒径增大,易于在膜表面形成更为松散的沉积层,并使膜污染从以膜孔堵塞和沉积层污染为主转化为以沉积层污染为主的可逆性污染。     

脉冲电解法预处理酸性染料废水

研究了脉冲电解法预处理酸性偶氮类染料废水的处理效果,考察了不同工艺条件对废水COD去除率、脱色率和可生化性的影响。结果表明,脉冲电源峰值电压12 V,频率600 Hz,占空比50%的条件下电解40 min后,COD去除率可达59%,废水脱色率达91.4%,BOD5/COD由0.09提高至0.34。在相同条件下,脉冲电解法的电流效率是直流电解法的2倍左右。与现行常用的铁/碳反应床相比,脉冲电解法在成本上也具有一定的优势,应用前景较好。     

垃圾渗滤液生化出水的脱色研究

分别采用脉冲电解法、混凝沉淀法、芬顿氧化法、高铁酸钾氧化法对垃圾渗滤液生化出水进行处理,考察了处理效果。结果表明：铁电极电解法和芬顿试剂氧化法均能脱除垃圾渗滤液的色度,去除有机物质。铁电极电解对色度的去除率可达98．4％,COD去除率可达84．4％;芬顿试剂氧化对色度的去除率可达99％,COD去除率可达85．8％。两种方法均能使出水达到排放标准。同时比较了各种处理方法的运行成本,在达到同样出水标准的前提下,铁电极电解运行成本远低于芬顿试剂氧化,为3．67元／t水,而芬顿试剂药剂成本为8．67元／t水。     

MBR技术的发展及应用

介绍了目前MBR的主要类型、膜污染情况、膜清洗方式以及MBR在不同领域的应用情况和工程实例,对MBR技术未来的发展趋势进行了预测。     

高氯酸钾项目生产过程中的环境风险及防范措施

根据国家环保总局发布的"高污染、高环境风险"产品名录(2009年),无机盐产品高氯酸钾属于高环境风险的产品,其生产存在较大风险。高氯酸钾项目在生产过程中的环境风险主要来源于强酸、强碱、有毒有害、易燃易爆等原辅材料、产品,运输、贮存和使用过程产生的燃爆、泄漏、贮运风险以及工艺废气治理措施失效等环节。识别项目产生的环境风险主要包括爆炸风险、泄漏风险、危险化学品贮运风险及氯气直排风险,并从生产管理、生产工艺及贮运等方面提出相应的防范措施。