Experimental investigation of performance and emission characteristics of diesel engine using Jatropha biodiesel with alumina nanoparticles

Biodiesels have come up as a very strong alternative for diesel fuel. Biodiesels such as Jatropha Oil Methyl Ester (JOME) are comparable in performance with that of the diesel engine. The thermal efficiency of engines fuelled with biodiesels was found lower than conventional diesel fuel but due to the bio-origin, the emission characteristics are much better. However, biodiesel increases the NOx emissions as these are rich in oxygen, hence nanoparticles are used in this experiment to curb the high temperatures and reduce the NOx formation. The experiment on naturally aspired diesel engine was conducted with four prepared test fuels other than neat diesel and neat biodiesel. The 50 and 150 of alumina nanoparticles were added separately to the pure diesel and pure Jatropha biodiesel to form the nano emulsions using ultrasonicator. The properties of nanoemulsion were evaluated using dynamic light scattering technique using zetasizer. The performance and emission characteristics of multi-cylinder diesel engine with these nanoemulsions were compared with that of neat fuels. The results showed that using nanoparticles with diesel and biodiesel can contribute in a more efficient, economical, and eco-friendly engine operation.     

两种粒径氧化镍纳米颗粒对小球藻(Chlorella vulgaris)的生物毒性

采用藻类生物毒性测试方法(OECD201)研究了两种粒径氧化镍(NiO)纳米颗粒对小球藻(Chlorella vulgaris)的生物毒性.发现纳米颗粒的毒性与其尺度有关,7 nm NiO的毒性大于20 nm NiO,二者72 h EC50分别为18.01和74.64mgNiO/L.利用扫描电子显微镜(SEM)观察了对...     

SiO2纳米颗粒对小球藻(Chlorella pyrenoidosa)生长活性的影响

从Si02纳米颗粒对小球藻(Chlorella pyrenoidosa)生长活性的影响来探讨纳米材料的生物安全性问题.结果表明Si02纳米颗粒降低了小球藻的生物量和蛋白含量,并可以附着在细胞表面和进入细胞内部,造成了细胞的形变和结构损伤,从而抑制了小球藻的正常生长活性.Si02纳米颗粒对小球藻具有一定的毒性效应.     

基于PDCA理论创建矿山安全标准化系统的研究

简要介绍PDCA循环的基本定义、基本原理、特点、运行模式。结合某露天矿山实例,将PDCA循环与矿山安全标准化创建工作相结合,提出创建矿山安全标准化系统的方法及过程。结果表明,PDCA能简化创建矿山安全标准化系统的核心程序,使标准化系统更加易于掌控。希望能对准备建立或正在实施矿山安全标准化系统的企业起到一些借鉴作用。     

Preconcentration of cadmium and copper ions on magnetic core–shell nanoparticles for determination by flame atomic absorption

Magnetic core–shell nanoparticles modified by (3-aminopropyl) trimethoxy silane were prepared and used as adsorbent for the extraction and preconcentration of cadmium and copper ions. The ions were desorbed with nitric acid followed by determination with flame atomic absorption spectrometry. The extraction conditions were investigated systematically. The method was applied for the determination of Cd(II) and Cu(II) ions in different water samples. The accuracy was also evaluated through analysis of certified reference material.     

Effect of two TiO2 nanoparticles on the growth of unicellular green algae using the OECD 201 test guideline: influence of the exposure system

This work aimed at assessing the influence of different exposure systems to perform the commonly used OECD 201 freshwater algal growth inhibition test in the context of nanoparticles hazard assessment. Two distinct TiO₂ nanoparticles were considered and three different exposure systems were investigated: Erlenmeyers flasks and 24-well microplates (both using an orbital shake system), and an alternative system using cylindrical vials and magnetic stirring. All three systems are in accordance with the OECD 201 test guideline recommendations. We concluded that the exposure systems applied to achieve the test can substantially affect the ecotoxicological results and the subsequent calculated ECx. The selected systems influenced both the interaction between algal cells and TiO₂ nanoparticles as well as the growth inhibition recorded. Disparities in ecotoxicity relative to the TiO₂ nanoparticles tested were also observed and are finally discussed.     

不同老化时间的TiO_2纳米颗粒对玉米生长的影响

为探讨老化时间对TiO_2纳米颗粒(nanoparticles,NPs)生物有效性的影响,研究了不同老化时间的Ti O_2NPs(0~120 d)对玉米幼苗生长的影响、在玉米体内的吸收及其在植株不同部位的存在位点等。研究发现,不同浓度的TiO_2NPs(1 000 mg·kg~(-1)和2 000 mg·kg~(-1))加入到土壤中,对玉米幼苗干鲜重没有明显的影响,但老化时间小于60 d时,对玉米幼苗株高有一定的抑制效应,老化60 d之后,随着老化时间的继续延长,毒性逐渐降低,最后趋于稳定。老化60 d时,TiO_2NPs处理的玉米幼苗根冠增大,玉米幼苗体内产生H2O_2的累积。在Ti O_2老化土壤中生长的玉米幼苗根系和地上部均有Ti的累积,1 000 mg·kg~(-1)的TiO_2NPs在玉米幼苗根部的生物累积系数达到35.4%,在地上部为13.6%,在玉米植株体内的转运系数为0.38;通过TEM观察,TiO_2NPs可以进入到玉米幼苗体内,并存在于根细胞的细胞质和叶绿体膜上,在叶片细胞的液泡和细胞核中也发现有TiO_2NPs的存在。上述研究结果为客观评价TiO_2NPs的生态风险提供了有用信息。     

Catalytic activity of noble metal nanoparticles toward hydrodechlorination: influence of catalyst electronic structure and nature of adsorption

In this study, stabilized Pd, Pt and Au nanoparticles were successfully prepared in aqueous phase using sodium carboxymethyl cellulose (CMC) as a capping agent. These metal nanoparticles were then tested for catalytic hydrodechlorination toward two classes of organochlorinated compounds (vinyl polychlorides including trichloroethylene (TCE), tetrachloroethylene (PCE), and alkyl polychlorides including 1,1,1-trichloroethane (1,1,1-TCA), and 1,1,1,2-tetrachloroethane (1,1,1,2-TeCA)) to determine the rate-limiting steps and to explore the reaction mechanisms. The surface area normalized reaction rate constant, k_SA, showed a systematic dependence on the electronic structure (the density of states at the Fermi level) of the metals, suggesting that adsorption of organochlorinated reactants on the metal catalyst surfaces is the rate-limiting step for catalytic hydrodechlorination. Hydrodechlorination rates of 1,1,1-TCA and 1,1,1,2-TeCA agreed with the bond strength of the first (weakest) dissociated C-Cl bond, suggesting that C-Cl bond cleavage, which is the first step for dissociative adsorption of the alkyl polychlorides, controlled the catalytic hydrodechlorination rate. However, hydrodechlorination rates of TCE and PCE correlated with the adsorption energies of their molecular (non-dissociative) adsorption on the noble metals rather than with the first C-Cl bond strength, suggesting that molecular adsorption governs the reaction rate for hydrodechlorination of the vinyl polychlorides.     

Optimizing synthesis conditions of nanoscale zero-valent iron (nZVI) through aqueous reactivity assessment

Nanoscale iron particles (nZVI) is one of the most important engineered nanomaterials applied to environmental pollution control and abatement. Although a multitude of synthesis approaches have been proposed, a facile method to screen the reactivity of candidate nZVI materials produced using different methods or under varying synthesis conditions has yet been established. In this study, four reaction parameters were adjusted in the preparation of borohydride-reduced nZVI. The reductive properties of the resultant nanoparticles were assayed independently using two model aqueous contaminants, Cu(II) and nitrate. The results confirm that the reductive reactivity of nZVI is most sensitive to the initial concentration of iron precursor, borohydride feed rate, and the loading ratio of borohydride to ferric ion during particle synthesis. Solution mixing speed, in contrast, carries a relative small weight on the reactivity of nZVI. The two probing reactions (i.e., Cu(II) and nitrate reduction) are able to generate consistent and quantitative inference about the mass-normalized surface activity of nZVI. However, the nitrate assay is valid in dilute aqueous solutions only (50 mg·L⁻¹ or lower) due to accelerated deactivation of iron surface at elevated nitrate concentrations. Additional insights including the structural and chemical makeup of nZVI can be garnered from Cu(II) reduction assessments. The reactivity assays investigated in this study can facilitate screening of candidate materials or optimization of nZVI production parameters, which complement some of the more sophisticated but less chemically specific material characterization methods used in the nZVI research.     

Effects of molecular weight and concentration of carboxymethyl cellulose on morphology of hydroxyapatite nanoparticles as prepared with one-step wet chemical method

Nano-sized apatite particles (nAP) synthesized with carboxymethyl cellulose (CMC) have shown great application potentials in in situ heavy metal remediation. However, differences in CMC’s properties effects on the size of nAP produced are not well understood. In this paper, two types of CMC, with respective molecular weights (MW) of ～120000 and ～240000 Dalton or respective polymerization degrees of 500 (CMC-500) and 1050 (CMC-1050), were studied in a concentration range of 0.05%–0.5% (w/w) for nAP synthesis. Morphology of the particles was characterized with transmission electron microscopy (TEM). Results showed that 0.05% CMC-500 solution gave an average particle size of 148.7±134.9 nm, 0.25% CMC-500 solution produced particles of 21.8±20.4 nm, and, 0.5% CMC-500 solution contained particles of 15.8±7.7 nm. In comparison, 0.05% CMC-1050 solution produced nanoparticles of 6.8±3.2 nm, 0.25% CMC-1050 produced smaller nAP of 4.3±3.2 nm, and 0.5% CMC-1050 synthesized the smallest nanoparticles in this study, with an average diameter of 3.0±2.1 nm. Chemical composition of the products was identified with X-ray diffraction (XRD) as pure hydroxyapatite. Interactions between nAP and CMC were discussed with help of attenuated total reflection Fourier transform infrared (ATRFTIR) spectroscopic data. This study showed that CMC at higher concentration as well as higher MW facilitated to produce finer nanoparticles, showing that nAP size could be manipulated by selecting appropriate CMC MW and/or applying appropriate CMC concentration.