汽车制动系统的匹配设计

通过对汽车制动系统的原理及结构性能的探讨,进一步掌握整车新产品开发设计中制动系统的匹配计算.     

火灾下梁柱端板连接节点的力学性能研究

通过火灾作用下门式刚架半刚性端板连接节点ANSYS计算模型的分析,得出了节点的转角温度关系及转角达到极限状态时的临界温度,为分析节点在火灾下的转动性能和节点的抗火能力提供一种经济、可行的方法,并发现在进行ANSYS模型抗火计算时,采用EC3高温下钢材特性较为合理。对基于计算的钢结构节点抗火设计方法研究具有理论意义和工程...     

五区电除尘技术试验研究及应用

五区电除尘技术是一种新型的电除尘器提效改造技术,由于其性能优良、工作可靠、稳定运行,工程投资少、施工周期短等优点而得到广泛应用。在模拟计算分析其阻力和对气流分布影响的基础上,试验研究其对不同粉尘的收尘性能,结果表明:五区电除尘技术可高效捕集微细、高比电阻粉尘,且设备阻力小,气流分布理想。     

倾角和循环流量对平板型光催化反应器性能的影响

考察了平板倾角和循环流量对平板反应器流动特性和性能的影响 ,并讨论了以太阳光为辐射光源时平板型反应器的最佳倾角问题 .研究表明 ,平板上液体体积 (V)和水膜厚度 (b)与倾角 (β)、循环流量 (Q)分别存在定量关系 .入射辐射条件相同时 ,在悬浮催化剂体系中 ,平板倾角越小 ,循环流量越大 ,反应器性能越高 ;在固定催化剂体系中 ,平板反应器 (长 1m,宽 0.48m)的性能最佳时的循环流量为 500L/h、倾角为 10°,相应雷诺数为 286.无论在悬浮催化剂还是固定催化剂体系中 ,周期性地辐射能提高反应速率 .     

Experimental study of recirculating flows generated by lateral shock waves in very large channels

Due to the lack of data on hydraulic-jump dynamics in very large channels, the present paper describes the main characteristics of the velocity field and turbulence in a large rectangular channel with a width of 4 m. Although a hydraulic jump is always treated as a wave that is transversal to the channel wall, in the case of this study it has a trapezoidal front shape, first starting from a point at the sidewalls and then developing downstream in an oblique manner, finally giving rise to a trapezoidal shape. The oblique wave front may be regarded as a lateral shockwave that arises from a perturbation at a certain point of the lateral wall and travels obliquely toward the centreline of the channel. The experimental work was carried out at the Coastal Engineering Laboratory of the Water Engineering and Chemistry Department of the Technical University of Bari (Italy). In addition to the hydraulic jump formation, a large recirculating flow zone starts to develop from the separating point of the lateral shock wave and a separate boundary layer occurs. Intensive measurements of the streamwise and spanwise flow velocity components along one-half width of the channel were taken using a bidimensional Acoustic Doppler Velocimeter (ADV). The water surface elevation was obtained by means of an ultrasonic profiler. Velocity vectors, transversal velocity profiles, turbulence intensities and Reynolds shear stresses were all investigated. The experimental results of the separated boundary layer were compared with numerical predictions and related work presented in literature and showed good agreement. The transversal velocity profiles indicated the presence of adverse pressure gradient zones and the law of the wall appears to govern the region around the separated boundary layer.     

利用果胶培养基分离番茄根际细菌

采用平板稀释和PCR-DGGE相结合的方法,比较了4种培养基(果胶富营养培养基PM,只含果胶一种营养的培养基PA,添加果胶的寡营养培养基YPP以及与YPP营养成分一致但不添加果胶的寡营养培养基YPG)分离番茄根际细菌的能力.结果显示:PA培养基能够分离到42种形态的细菌;YPP培养基可以分离到最高的细菌菌落数,分离获得的种类比PA少;YPP培养基分离获得细菌的种类和菌落数量比YPG培养基要多.聚类分析也显示只有果胶一种营养的PA培养基能分离到最多种类,分离获得的菌群与自然环境中微生物群落最相似.研究结果表明添加番茄根际主要分泌物——果胶到培养基中可以提高培养基分离细菌的能力.     

杭州城市热岛空间分布及时域-频域多尺度变化特征

利用杭州20个自动气象站逐时数据计算2006年四季各站平均热岛强度,用薄盘样条函数法研究杭州城市热岛的空间变化,发现:夏秋季时较强,而春冬季强度较弱;总体趋势是杭州市丰体城区最大,向外辐散,逐渐减弱.利用2006年2月～2007年2月逐时气象数据,结合Morlet小波变换方法分析了杭州热岛周期变化特征,发现:其在频域上具有多尺度的周期振荡,尺度主要是24 h(日)、168 h(周)和1 490 h(2月).以日为周期的热岛强度与局地气候系统、地面长波辐射、近地层热量交换、人为热的日周期变化有关;而以周为周期的热岛强度变化成因主要与人类活动及城市大气污染物排放的"周末效应"有显著的关系;以2个月为周期的变化特征与一些较大尺度的自然变化相关.结果表明,杭州城市热岛时空变化是天气系统、地面长波辐射、下垫面、大气污染、人为热、人类活动、近地层热量交换等共同作用的结果.     

不锈钢板式热沉传热特性的实验与模拟研究

目的 研究流量、胀高及焊点排布方式对不锈钢板式热沉传热特性的影响。方法 搭建实验平台,加工出结构参数不同的板式热沉实验件,同时采用静力隐式算法建立相应的几何模型,通过实验与数值模拟相结合的方法,研究流量、胀高和焊点排布方式的变化对板式热沉热阻的影响规律,并分析热沉流道内部流场状态。结果 首先计算了6个工况下的热阻,发现实际换热量为540 W时,数值模拟与实验结果的最大相对误差不大于25%。然后分析了误差来源,最后得到了热沉全流道速度场与温度场的分布情况。结论 实验与模拟结果有较好的符合程度,证明了数值模拟方法的可靠性。在换热量相同时,板式热沉的热阻随流量与胀高的增大而减小,焊点为菱形排布的热沉传热性能相对更好。板式热沉内部的流场具有周期性,焊点使流体扰动增强,并形成射流和旋涡,起到了强化传热的效果。     

重复碰撞载荷下加筋板结构的动态响应研究

目的 探究船体加筋板结构在受到重复碰撞载荷作用下塑性变形的累计趋势,分析加筋板主要参数对损伤演化过程的影响,揭示高速、重复冲击下船体加筋结构的变化机理。方法 以一纵三肋加筋板为研究对象,建立基于能量法的刚塑性加筋板动态变形计算方法,以及基于Johnson-Cook本构关系的数值模拟方法,开展不同板架厚度、冲击能量以及冲击尺寸等参数对加筋板变形演化影响的研究。结果 对比分析了理论模型和数值方法,获得了不同参数下的加筋板的结构损伤演化规律。结论 理论解和数值解较为吻合。冲击能量增加后,加筋板的塑性变形量、塑性变形累积速度也随之增加。载荷集中程度越大,对于碰撞边界的破坏效应越大。     

Comparison of Soil Extraction Isotherms of Soil Samples Saturated With Nonpolar Liquids

In multiphase systems capillary pressures play a significant role on fluid movement and retention. The facility to predict the effect of different thermal remediation strategies requires the knowledge of the effect of temperature on capillary pressure-saturation relationships in the soils. The objective of recent study was (a) to develop a technique for routinely measuring the pressure-saturation curves of soil samples saturated with a nonpolar liquid at different regulated temperatures (b) to build a database using the measured pressure-saturation curves and the physical, chemical properties of the model soils (c) to establish the dependence of nonaqueous phase liquid retention on the soil properties and the temperature. The retention curves (extraction isotherms) with nonaqueous phase liquid were determined using a modified pressure plate extractor. The wetting phase was a non-aromatic hydrocarbon distillation product. Pressure plates were designed and constructed in the laboratory of our department. The temperature was held constant at 20, 40 and 60 ^∘C. Statistical analysis was performed involving selected soil parameters and the measured nonaqueous phase liquid retention data. The results show that knowing some easily measurable soil parameters (bulk density, particle size distribution, humus and lime content) we can estimate the nonaqueous phase liquid retention of the soils. The measured “extraction isotherms” provide essential information about the temperature-dependency of pressure-saturation curves.