典型印染废水处理过程中芳香烃化合物的污染特征及污泥生态风险评价

采用GC-MS测定了典型综合印染废水处理厂废水和污泥中芳香烃化合物的含量.结果表明,原水中苯系物总量为203.96±15.18μg·L-1,其中二甲苯占62.7%,尾水中苯系物总量为0.2±0.029μg·L-1,整个处理工艺对苯系物的去除效率为99%.原水中多环芳烃(PAHs)总浓度达1349.51±35.77 ng·L-1,以3—6环为主,主要富集在颗粒物上.整个工艺对PAHs的去除效率为95%,尾水中PAHs总浓度为65.81±20.99ng·L-1,以2—3环为主.干污泥中PAHs含量高达2996.10±151.0 ng·g-1,污泥吸附为水相中PAHs去除的主要机理之一.印染污泥直接填埋或农用会引起潜在的生态危害.     

吉林油田稠油热采污水处理絮凝剂实验研究＊

在含油污水水质分析的基础上,采用烧杯实验和分光光度法研究絮凝剂的絮凝效果。筛选出以无机絮凝剂硫酸铝与两性高分子聚合物CE-3090的复配体系,同时研究了影响絮凝效果的因素并探究了其影响机理。结果表明:在温度为40℃,pH为7.72,170 r/min时高速搅拌1 min,然后50 r/min低速搅拌5 min,硫酸铝的加量为90 mg/L、CE-3090的加量为0.5 mg/L,絮凝沉降30 min后其絮凝效果较好。实验证明:该复配处理剂处理含油污水后,含油量和杂质含量都达到了SY/T 5329-94《碎屑岩油藏注水水质推荐指标及分析方法》油田污水回注的要求。     

Some properties of a sequencing batch reactor for treatment of wastewater containing thiocyanate compounds

Thiocyanate (SCN) compounds in photo-processing wastewater (PPWW) could be treated by an SBR system without any release of thiocyanate to the atmosphere during the aeration step. An SCN loading greater than 84 g m(-3)d(-1) showed negative effects on the growth of bio-sludge and removal efficiencies of the system. The acclimatization period of the system was increased with an increase in SCN concentration or loading. The COD, BOD(5), TKN, and SCN removal efficiencies were 96.0 +/- 1.6%, 72 +/- 2%, 49 +/- 5%, and 82 +/- 3%, respectively, under an SCN loading of up to 84 g m(-3)d(-1). The removal efficiency of the system was repressed by SCN due to the repressed growth rate of nitrification bacteria. However, the removal efficiency could be increased with an increase in HRT or a decrease in SCN loading. Also, increases in HRT or decreases in SCN loading led to increased sludge age or solid retention time (SRT) and decreased the sludge volume index (SVI) value. The SRT and SVI of the system with synthetic wastewater containing 840 mg l(-1) SCN under an HRT of 3 days (SCN loading of 280 g m(-3)d(-1)) were 3.9 +/- 0.7 days and 65 +/- 4 ml g(-1), respectively, while they were 11.2+/-0.8 days and 55 +/- 6 ml g(-1), respectively under an HRT of 10 days (SCN loading of 84 g m(-3)d(-1)).     

Assessing the impact of leather industries on the quality of water discharged into the East China Sea from Wenzhou Watersheds

Ammonium nitrogen and total germanium are among the main pollutants in the wastewater discharged from the leather industry. The intake of high concentrations of ammonium nitrogen and/or total germanium harms human health and biological species, as is well documented in literature. This paper focuses on assessing the trends of ammonium nitrogen and total germanium concentrations through time in two watersheds (Aojiang and Oujiang) in the Wenzhou metropolitan area of Zhejiang Province and their relationships with the released wastewater using regression and correlation statistics. The paper also utilizes the integrated pollution index to evaluate water quality in the two watersheds. Preliminary results show that, from 1992 to 1998 in the Aojing watershed, the concentrations of ammonium nitrogen and total germanium increased 13 and 14 times, respectively, decreasing somewhat after 1998, while between 1992 and 1997 in the Oujiang watershed, the concentrations increased, then decreased after 1997. The concentrations of ammonium nitrogen and total germanium are positively related to the amount of released wastewater. The concentrations of ammonium nitrogen and total germanium exceeded water standards 12 and 3 times, respectively, in Pingyang county of the Aojiang watershed, 14 and 3.3 times in Lucheng District of the Oujiang watershed, and 14 and 3.8 times in the Ouhai Oujiang watershed, respectively. In Pingyang county of the Aojiang watershed, the water quality degraded from Type III in 1992 to over Type V in 2003, and in the Oujiang watershed, the water quality degraded from Type II to over Type IV in 1999, when they were compared with the water quality standards. The water quality slightly improved in 2003 for the Oujiang watershed. It appears that pollution did have a direct positive correlation with leather industry production in the Pingyang Aojing watershed, while there was a negative correlation between the two in the Oujiang watershed. In these two watersheds, the integrated pollution index did not appear to relate to population dynamics and agricultural production. This paper also discusses the current new methodologies and approaches adopted nationally and internationally to reduce the contaminants and purify the environment for maintaining a sustainable and healthier environment in Wenzhou.     

电场作用对不同藻菌体系处理猪场废水的强化机制研究

为解决猪场废水高色、高浊、高盐的水质特征对藻菌微生物体系处理效果的限制作用,采用电场处理与多种不同微藻/细菌(活性污泥)微生物体系处理相结合,考察了电场对微生物处理猪场废水的效果和生长状况的影响和作用机制.同时,通过对比微藻、微藻-活性污泥、活性污泥3种微生物体系对经电场处理养猪沼液中污染物去除效果及微生物生长情况,考察了电场处理对微生物处理效果的影响和作用.结果表明：电场对养猪沼液色度和浊度均有较好的去除效果,去除率分别为90.43%、99.69%;电场处理后的沼液再进行微生物处理可取得更优的处理效果,微生物对总氮和总磷的去除率最高分别为70.65%、67.30%.此外,微藻-活性污泥共生体系在污染物去除效果和生长状况方面均优于单一微生物体系.微藻-活性污泥体系最终叶绿素a含量为接种时的7.65倍,活性污泥生物量为接种时的1.51倍,远高于单一微生物体系.说明电场处理与微藻-活性污泥生物处理相结合,可以有效提高污染物去除效果,同时获得更多有价的生物质资源,实现更为可观的经济价值,具有广阔的应用潜力和发展前景.     

藻-菌颗粒污泥中微生物胞外多糖特性研究

藻-菌颗粒污泥（Microalgal-bacterial granular sludge,MBGS）工艺在城市污水生物处理领域引起了越来越多的研究兴趣.胞外多糖（Polysaccharides,PS）是胞外聚合物（Extracellular polymeric substances,EPS）的重要组分,是维持颗粒稳定性的关键物质之一.研究了MBGS中PS的凝胶性能,以及松散结合的胞外聚合物（Loosely bound EPS,LB-EPS）和紧密结合的胞外聚合物（Tightly bound EPS,TB-EPS）中PS的含量、分布及单糖组成,并探究了MBGS的EPS中PS可能的微生物来源.结果表明,MBGS的PS具有凝胶性,主要分布在TB-EPS中,含量为 （40.06±2.30） mg·g^-1,其中半乳糖、葡萄糖和鼠李糖为主要单糖组分,而果糖和古罗糖醛酸未被检出.Thauera、Hydrogenophaga、Azoarcus和Acutodesmus是PS的主要微生物潜在来源.本文研究结果阐释了MBGS PS的基本特性,为MBGS工艺的稳定运行提供了理论基础.     

臭氧氧化印染工业园废水的效能与机理研究

本研究开展了印染废水臭氧氧化影响因素、降解动力学和淬灭实验,测定了自由基物种、降解产物和琥珀酸脱氢酶活性.结果表明,苯胺去除效率随着pH值、臭氧投加量和臭氧投加速率的增加分别逐渐减小、增加和减小,且臭氧浓度为24 mg·L^-1时苯胺去除效率最高.臭氧氧化苯胺的适宜条件为：臭氧浓度为24 mg·L^-1、臭氧投加量为200 mg·L^-1和臭氧投加速率为4 mg·min^-1,此时苯胺的去除效率为47.2%.臭氧氧化苯胺是直接氧化为主结合羟基自由基反应的作用过程.苯胺脱氨基和裂解苯环后生成戊二酸或L-焦谷氨酸直至矿化.大肠杆菌在原水和臭氧氧化后废水中的酶抑制率分别为83.4%和24.7%.臭氧氧化前处理后,混凝去除色度、SS、COD、总氮、总磷、硫化物和苯胺的效能分别提高了0.72%、0.46%、31.40%、9.40%、22.80%、31.40%和63.30%.研究结果为臭氧氧化印染工业园废水前处理的应用提供了基础依据.     

基于RuO2-IrO2/Ti和Fe0电极的电氧化-电絮凝处理含Tl废水

基于RuO₂-IrO₂/Ti形稳电极和Fe⁰牺牲电极实现电氧化-电絮凝(EO-EC)一体化处理含Tl (I)废水,并与单一的电絮凝(EC)进行比较,探讨了EO-EC处理含Tl废水的机理.结果表明,相较于单一EC,EO-EC (1:1)组合技术适应于宽pH (4-10)以及电流密度范围(5-20mA/cm²)下含Tl废水高效处理,且不易发生钝化;活性氯以及氧化还原电位在Tl (I)间接氧化Tl (III)过程中扮演重要角色,沉淀分析表明生成的Tl (OH)_3(s)与絮体Fe (OH)_3(am)共沉淀,纤铁矿位点可吸附残留Tl (I).EO-EC一体化技术可满足实际含Tl废水达标处理(<2µg/L)且具有经济可行性.     

β-PbO2和BDD电极处理印染反渗透浓水性能

系统比较了β-PbO₂/Ti-Ti和BDD/Si-Ti两种电极体系处理实际印染行业反渗透浓水(ROC)的性能,考察了同步去除化学需氧量(COD)和总氮(TN)的动力学,以及对废水可生化性的改善情况.结果表明,BDD/Si-Ti电极体系的析氧电位(2.45V)和析氯电位(1.90V),以及阳极氧化电位和阴极还原电位的绝对值均高于β-PbO₂/Ti-Ti电极体系;两种电极体系对COD以及TN的去除符合拟一级动力学,其中BDD/Si-Ti电极体系对COD去除的表观速率常数和能量利用效率均优于β-PbO₂/Ti-Ti电极体系;而β-PbO₂/Ti-Ti电极体系对TN去除的表观速率常数和能量利用效率更优.β-PbO₂/Ti-Ti电极体系在5mA/cm²的电流密度下电解15min,可使反渗透浓水BOD/COD从0.18升至0.42(提高1.33倍),而BDD/Si-Ti电极体系仅提升0.78倍.两者相比,BDD/Si-Ti电极体系适用于矿化污染物,β-PbO₂/Ti-Ti电极体系适用于改善废水可生化性.     

黄药废水处理的研究现状及展望

黄药是浮选金属硫化矿物应用最广、最有效的捕收剂,但其在选矿废水中的残留会对环境造成严重污染。黄药废水净化排放及回水利用不仅对环境有利,且符合选厂经济利益。本文主要介绍了近年来常用的黄药废水净化处理方法,并对未来黄药废水处理方向进行了展望,以其对黄药选矿废水的治理提供一定的参考价值。