Cost-performance analysis of nutrient removal in a full-scale oxidation ditch process based on kinetic modeling

A full-scale oxidation ditch process for treating sewage was simulated with the ASM2d model and optimized for minimal cost with acceptable performance in terms of ammonium and phosphorus removal. A unified index was introduced by integrating operational costs (aeration energy and sludge production) with effluent violations for performance evaluation. Scenario analysis showed that,in comparison with the baseline (all of the 9 aerators activated), the strategy of activating 5 aerators could save aeration energy significantly with an ammonium violation below 10%. Sludge discharge scenario analysis showed that a sludge discharge flow of 250–300 m3/day (solid retention time (SRT), 13–15 days) was appropriate for the enhancement of phosphorus removal without excessive sludge production. The proposed optimal control strategy was: activating 5 rotating disks operated with a mode of "111100100" ( "1"represents activation and "0" represents inactivation) for aeration and sludge discharge flow of 200 m3/day (SRT, 19 days). Compared with the baseline, this strategy could achieve ammonium violation below 10% and TP violation below 30% with substantial reduction of aeration energy cost (46%) and minimal increment of sludge production (< 2%). This study provides a useful approach for the optimization of process operation and control.     

Removal of Cu(II) from acidic electroplating effluent by biochars generated from crop straws

The removal efficiency of copper(Cu(Ⅱ)) from an actual acidic electroplating effluent by biochars generated from canola,rice,soybean and peanut straws was investigated.The biochars simultaneously removed Cu(Ⅱ) from the effluent,mainly through the mechanisms of adsorption and precipitation,and neutralized its acidity.The removal efficiency of Cu(Ⅱ) by the biochars followed the order:peanut straw char > soybean straw char > canola straw char > rice straw char a commercial activated carbonaceous material,which is consistent with the alkalinity of the biochars.The pH of the effluent was a key factor determining the removal efficiency of Cu(Ⅱ) by biochars.Raising the initial pH of the effluent enhanced the removal of Cu(Ⅱ) from it.The optimum pyrolysis temperature was 400°C for producing biochar from crop straws for acidic wastewater treatment,and the optimum reaction time was 8 hr.     

不同Fe(Ⅲ)对活性污泥异化铁还原及除磷影响研究

以SBBR反应器活性污泥作为铁还原菌菌种来源,采用兼性厌氧/严格厌氧恒温培养试验,投加不同Fe(Ⅲ)考察各条件下的异化铁还原能力同时比较对磷的去除效果.结果表明:2种条件下Fe(Ⅲ)还原能力具有较好的一致性,依次为:Fe(OH)3＞氧化铁皮＞青矿＞红矿,其中严格厌氧条件下较好.同时,除磷效果与其呈正相关,富集培养至7d,Fe(OH)3及氧化铁皮体系出水磷浓度均达到2mg/L以下,之后继续降低,最终达到0.5mg/L以下.结合异化铁还原除磷机理,可以证明,不同Fe(Ⅲ)表面吸附作用对TP的去除贡献较小,其主要作用为铁还原菌驱动下的化学沉淀去除.     

Metal loaded zeolite adsorbents for hydrogen cyanide removal

Metal(Cu,Co,or Zn) loaded ZSM-5 and Y zeolite adsorbents were prepared for the adsorption of hydrogen cyanide(HCN) toxic gas.The results showed that the HCN breakthrough capacity was enhanced significantly when zeolites were loaded with Cu.The physical and chemical properties of the adsorbents that influence the HCN adsorption capacity were analyzed.The maximal HCN breakthrough capacities were about the same for both zeolites at 2.2 mol of HCN/mol of Cu.The Cu2p XPS spectra showed that the possible species present were Cu2O and CuO.The N1s XPS data and FT-IR spectra indicated that CNwould be formed in the presence of Cu+/Cu2+ and oxygen gas,and the reaction product could be adsorbed onto Cu/ZSM-5 zeolite more easily than HCN.     

Preparation of MgO/B2O3 coatings by plasma spraying on SUS304 surface and effects of heat-resistant

This study mainly deals with the preparation of MgO/B₂O₃ coatings by plasma spraying on the SUS304 surface and the effects of heatresistant. The power materials of low thermal conductivity were selected to control the heat divergent performance of high temperature parts. The reticular micro-structure between the cover thermal layer and the substrate was prepared by using the plasma spraying method. The powder mixture of MgO and B₂O₃ were selected as spraying materials and the SUS304 was used as the substrate material. The MgO/B₂O₃ coating was prepared on the surface of the SUS304 to provide better cover thermal performance. The properties of the microstructures and the morphologies were studied by Optical Microscope, Scanning Electron Microscope, Electron Probe Microanalyzer, and X-ray Diffraction. The results showed that the cover thermal performance has been improved.     

Synthesis and characterization of agricultural controllable humic acid superabsorbent

Humic acid superabsorbent polymer (P(AA/AM-HA)) and superabsorbent polymer (P(AA/AM)) were synthesized by aqueous solution polymerization method using acrylic acid (AA), acrylamide (AM) and humic acid (HA) as raw material. The effects of N,N'-methylenebisacrylamide (MBA) crosslinking agent, potassium peroxydisulfate (KPS) initiator, reaction temperature, HA content, ratio of AA to AM, concentration of monomer and neutralization of AA on water absorption were investigated. Absorption and desorption ratios of nitrogen fertilizer and phosphate fertilizer were also investigated by determination of absorption and desorption ratio of NH₄⁺, PO₄^3- on P(AA/AM-HA) and P(AA/AM). The P(AA/AM-HA) and P(AA/AM) were characterized by Fourier translation infrared spectroscopy, biological photomicroscope and scanning electron microscopy (SEM). The optimal conditions obtained were as follows: the weight ratio of MBA to AA and AM was 0.003; the weight ratio of KPS to AA and AM was 0.008; the weight ratio of HA to AA was 0.1; the mole ratio of AM to AA is 0.1; the mole ratio of NaOH to AA is 0.9; the reaction temperature was 60℃. P(AA/AMHA) synthesized under optimal conditions, has a good saline tolerance, its water absorbency in distilled water and 0.9 wt.% saline solution is 1180 g/g and 110 g/g, respectively. P(AA/AM-HA) achieves half saturation in 6.5 min. P(AA/AM-HA) is superior to P(AA/AM) on absorption of NH₄⁺, PO₄^3-. The SEM micrograph of P(AA/AM-HA) shows a fine alveolate structure. The biological optical microscope micrograph of P(AA/AM-HA) shows a network structure. Graft polymerization between P(AA/AM) and HA was demonstrated by infrared spectrum. The P(AA/AM-HA) superabsorbent has better absorbing ability of water and fertilizer, electrolytic tolerance and fewer cost than P(AA/AM) superabsorbent.     

Numerical simulation of alga growth and control in Dalian Bay

WAHMO model was used to simulate the distribution of pollutants in Dalian Bay, China as to predict well as the growth and control of alga. The observed and predicted values of main pollutants showed a good trend at all study locations and the different between them can be ignored. Simulation results illustrated that phosphate was one of limited factors to control algal growth at the location near the sewage outfall, meanwhile, away from the sewage outfall, the synergy of ammonium nitrogen and phosphate was the limited factor.     

反硝化菌株DA-1的脱氮研究

菌株DA-1被发现能在好氧和厌氧环境中将硝酸盐转化为气态氮。在以NO3-为唯一氮源的条件下研究了碳源、C/N和pH值对菌株DA-1好氧和厌氧反硝化脱氮的影响。结果表明:同等条件下,48 h内菌株DA-1的厌氧脱氮效率高于好氧脱氮率;菌株DA-1能在好氧和厌氧条件下利用乙酸、柠檬酸以及葡萄糖进行细胞增殖和反硝化。在厌氧条件下,三者作为碳源时的反硝化效率分别为(34.04±0.15)%、(22.72±0.32)%和(11.32±0.06)%,均低于好氧条件下的(25.38±0.14)%、(17.52±0.11)%和(8.06±0.01)%。2种条件下均是乙酸为碳源时反硝化效率最高。而丁二酸仅能在厌氧环境中作为电子供体参与反硝化反应。C/N越高越有利于菌株DA-1的厌氧反硝化,当C/N为10时,反硝化效率最高为(35.06±0.19)%。而在好氧条件下,菌株反硝化效率随着C/N的升高,先升高再降低,当C/N为8时,反硝化效率最高;好氧和厌氧脱氮的最适pH值为7.0。体系偏酸或者偏碱都会造成菌株DA-1脱氮效率的降低并出现亚硝酸盐累积。厌氧环境中pH=5.0时累积的亚硝酸盐浓度高达(8.95±2.05)mg/mL。     

改良型DAT-IAT工艺脱氮除磷运行工艺研究

对DAT-IAT工艺加以改良,在DAT池前端分隔出缺氧区和厌氧区,强化了系统脱氮除磷能力。并在不同运行条件下,对改良型DAT-IAT工艺的脱氮除磷效果进行研究,得出优化条件。结果表明:DAT池溶解氧浓度在1.8².2 mg/L之间;IAT池至DAT池的污泥回流比为300%;DAT池至缺氧区的混合液回流比为40%2.2 mg/L之间;IAT池至DAT池的污泥回流比为300%;DAT池至缺氧区的混合液回流比为40%⁵0%;IAT池采用曝气1 h、沉淀1 h、排水1 h的运行工况;系统泥龄在1350%;IAT池采用曝气1 h、沉淀1 h、排水1 h的运行工况;系统泥龄在13¹6 d时,改良型工艺可以同时取得较好的脱氮和除磷效果,并且改良型工艺的脱氮除磷能力明显优于常规DAT-IAT工艺。     

化学铁盐辅助除磷对生物除磷的影响研究

化学辅助除磷有助于污水厂实现磷达标,但其对生物系统存在潜在的影响。针对除磷药剂对生物除磷过程的影响展开研究,选用硫酸亚铁进行化学辅助除磷。药剂形成的化学污泥干扰生物除磷过程且成分复杂,故以磷酸铁、氢氧化铁模拟化学污泥,由钾离子、K/P摩尔比计算出同步除磷中的生物除磷,来探讨化学污泥对聚磷菌释磷/吸磷过程的影响。结果表明,连续投加硫酸亚铁使聚磷菌的释磷量、吸磷量降低;系统中磷酸铁含量0.075 mmol/L时聚磷菌的释磷和吸磷能力提高了约25%,磷酸铁含量0.15 mmol/L时对聚磷菌吸磷有抑制作用;氢氧化铁对聚磷菌释磷、好氧初期吸磷均有抑制作用。生物污泥与化学污泥存在交互作用。