提高电捕焦油器安全生产运行的措施

简要叙述了电捕焦油器开工以来存在的问题,对电捕捕焦油器不能安全稳定运行的原因进行了分析,并采取改进措施。实践证明,改进工艺技术合理,方法可行,电捕焦油器运行效果达到指标要求。     

Physicochemical aspects of using natural scavengers in removing methylene blue (basic dye) from solution

Effluent from dyeing and finishing processes is an important source of water pollution. The effectiveness of bentonite, kaolinite and sediment from a local deposit in removing methylene blue as a cationic dye from aqueous solutions has been investigated. The adsorption equilibrium (isotherm) has been determined according to Freundlich and Langmuir equations. The optimum amount is 0.5 g for all adsorbents, and the optimum pH ranges are 2-8 for bentonite and 2-6 for kaolinite and sediment. With respect to kinetic modelling, the adsorption of methylene blue on various adsorbents was fitted to a second-order equation. Also, the thermodynamic parameters were determined. The negative free energy values indicate the feasibility of the process and spontaneous nature of adsorption. The positive ΔH° values indicate the endothermic nature of the process. Thus, Egyptian clay minerals and sediments have a great tendency to remove the dye from solutions.     

安庆石化热电厂正压浓相气力输灰系统

详细介绍了安庆石化热电厂正压浓相气力输灰系统的组成、特点及运行情况。该系统自投运以来，运行情况良好。     

炭纤维载体固定床厌氧发酵启动运行效果实验

以开发高效率、抗冲击性能强的高浓度有机废水沼气发酵技术为目的,用传统的 UASB反应器作为对照,研究了以炭纤维为生物膜载体的固定床厌氧反应器的启动运行效果。反应器进口废水 COD 为 5 000 mg/L, 水力停留时间 (HRT) 由213 h 逐步缩短为35 h,进水有机容积负荷(OLR)由0.56 kg COD/ (m³·d)提到3.45 kg COD/(m³·d)。结果表明,固定床反应器厌氧发酵的效率比对照高,出水 pH 值也比对照稳定;运行到第 50 d 时,固定床厌氧反应器和对照的 COD去除率分别由第 7 d 的36.56%和33.58%上升到87.9%和62.6%;固定床厌氧反应器的容积比产气率最高为1.16 m³/(m³·d),累计产气量为415.59 L,而对照的容积比产气率最高值仅为0.31 m³ /(m³·d),累计产气量为 71.66 L,前者最高容积比产气率和累计产气量分别是后者的3.74倍和5.78倍。固定床厌氧反应器的启动速度、COD 去除率和产甲烷效率显著地高于对照反应器。     

浸没式双轴旋转厌氧膜生物反应器处理啤酒废水试验

研究了新型浸没式双轴旋转厌氧膜生物反应器(SDRAnMBR)处理模拟啤酒废水的运行性能.研究结果表明,SDRAnMBR对啤酒废水有较好的处理效果,处理过程负荷提高快,有机物去除率高,系统耐冲击负荷的能力强,而且运行非常稳定.正常运行期间,进水COD在2900～5200mg·L-1,容积负荷为4.97～12.48kg·m-·3d-1(以COD计)时,COD的平均去除率为95.15%.膜截留和三相旋转流的共同作用,加强了在高污泥浓度(MLSS)和高负荷条件下运行时的混合和传质,从而强化了SDRAnMBR在高MLSS和高容积负荷下运行的稳定性和出水水质.     

A Comparison of VDT Workstation Adjustment Methods by Evaluating and Optimizing VDT Operator’s Seated Posture

Three methods of visual display terminal (VDT) workstation adjustment were compared in this study in order to investigate their effects on the operator’s seated posture. The first two methods were adjustments made both with and without any suggestion on the correct seated posture. The third method was an adjustment after which the workstation settings were initially set according to the results recommended by the IntelAd computer program. Ten male and 5 female participants were asked to readjust a VDT workstation until their most comfortable seated posture was obtained. When comparing the final seated postures to the ones ergonomically recommended, it was found that the workstation adjustment assisted by the computer program yielded the best result, followed by the adjustment without any suggestion on the seated posture, and then the adjustment with a suggestion on the seated posture. Furthermore, factors such as gender and typing skill level were not found to have any significant influence on the results.     

Differences in Eye and Hand Movements of Novice and Experienced Press Operators

Presses are very widely used in industrial and commercial companies and are often the source of serious accidents occurring during operation. Most of the accidents are due to inadequate training of novice operators. Continuous recordings of eye and hand movements of five novice operators and five experienced operators in press operation were made. Significant difference between novice and experienced operators was observed in eye fixation time, eye movement patterns, hand dwell time, and eye-hand coordination. Also, differences were observed in spatial distribution of eye fixations during the die-closing portion of a stroke. There were no significant differences between novice and experienced operators in the eye and the hand movement time. The results could be used as basic data to establish a guide determining the method and training period to train novice operators.     

An Observation Method for Analyzing Operators’ Routine Activity in Computerized Control Rooms

An activity analysis method was developed for studying the structure and dynamics of control room operators’ activity during normal operation based on directly observable elements of the operators’ behavior. The method assesses current activity along three dimensions in each 5-min period of the shift. Intensity characterizes arousal level, direction shows whether the activity is directed predominantly at the process control task, at something else, or miscellaneous. Motivation reflects if the activity is driven by intrinsic or extrinsic motivation. A case study is presented, in which 3 morning, 3 afternoon, and 3 night shifts of a Nuclear Power Plant operator crew are involved. The obtained results gave a deeper understanding of the operators’ activity and also revealed an “arousal compensation” tendency.     

基于灰色聚类法的地铁运营安全趋势分析

为评估地铁运营安全水平,掌握地铁运营风险变化趋势,采用灰色聚类法对某地铁线路运营一年以来每个月份的安全水平进行了分级评价。选取对地铁日常运营具有重要影响的设备设施故障作为评价指标,评价方法挖掘地铁运营以来的历史数据信息,体现了设备设施故障变化的时间特性,减少了安全评价中的主观性。将地铁运营安全水平分为五个安全等级,选取15%、35%、50%、65%、85%作为各安全等级的累积百分频率特征点,建立白化权函数得到各评价指标的灰类白化值。结合各设备设施的指标权重,得到了地铁线路运营一年来每个月份的安全等级情况。该方法为分析地铁运营安全趋势提供了参考。     

地铁车站突发客流疏运能力的理论计算与分析

针对车站OB应对亚运会期间大规模突发客流疏导问题,利用理论分析的方法计算不同车站设计方案,包括车站一岛一侧站台设计和一岛站台设计及不同通道设计时的最大疏运能力。计算考虑了车站建筑结构、出入口、闸机口和边门、楼扶梯等通道的数量及通过能力、站台面的容纳能力、列车的装载量、售检票方式、行车交路组织等诸多因素。通过对影响客流疏导的主要控制因素进行能力核算,分别得到了两种站台形式设计方案时的最大疏运能力的理论值。研究结论将有利于解决该车站应对亚运会期间大规模突发客流疏导问题,同时理论分析方法可为其他类似的车站能力设计提供参考。