Build it,but will they come? Evidence from consumer choice between gasoline and sugarcane ethanol

How consumers might switch from gasoline and diesel to alternative energy sources is not known, since the availability of alternatives is currently very limited. To bridge this gap, we exploit exogenous variation in ethanol prices at Brazil's pumps and uncover substantial consumer heterogeneity in the choice between long-established gasoline and an alternative that is similarly available and usable: sugarcane ethanol. We observe roughly 20% of flexible-fuel motorists choosing gasoline when gasoline is priced 20% above ethanol in energy-adjusted terms ($/mile) and, similarly, 20% of motorists choosing ethanol when ethanol is priced 20% above gasoline. We use transaction-level data to explore “non-price” characteristics which differentiate the two goods in the minds of different groups of consumers. Our findings suggest—and a counterfactual illustrates—that switching away from gasoline en masse, should this be desired, would require considerable price discounts to boost voluntary adoption, in the US and elsewhere.     

A/O法处理水产品加工废水

采用A/O工艺处理水产品加工废水,处理量为500 t/d,运行两年来,效果稳定,处理结果表明:对COD、BOD5和氨氮的去除率分别为94.7%、98.1%和86.4%,出水达到GB 8978—1996《污水综合排放标准》中的一级排放标准,且该工艺具有运行费用低、处理效果好、操作管理方便等一系列优点。     

沿海和内陆地区居民汞暴露量对比

通过对沿海和内陆居民食用水产品消费情况调查以及居民头发汞含量的分析,对不同地区普通居民的汞暴露水平进行了对比研究.居民水产品的消费情况采用调查问卷的形式,对沿海地区大连和内陆地区河南两地普通居民进行了随机调查,并同时采集被调查者的头发作为汞暴露情况的生物样本.本次研究共收集到有效调查问卷及头发样本213份(大连112份;河南101份),两地居民水产品消费量分别为:大连104 g.d-1,河南74 g.d-1;收集到的头发样本采用DMA-80测汞仪(按美国EPA-7473的方法)进行总汞含量的测定.头发总汞含量分析结果显示,大连为(0.363±0.256)μg.g-1,河南地区为(0.192±0.167)μg.g-1.两地区对同一年龄段居民发汞水平比较发现,大连地区居民发汞水平明显高于河南地区.以美国环境保护署(EPA)参考剂量1μg.g-1作为发汞基准,大连地区的超出比例为3%,河南地区的超出比例为1%.该研究结果为了解我国普通居民的汞暴露情况以及后续的汞暴露风险的定量计算提供了基础数据.     

Non-timber forest products and village livelihoods in Rajasthan,India: adaptation in a changing environment

This paper presents the results of research conducted between 2009 and 2014 in the village of Khanda Sharol in the state of Rajasthan, India. Our research objective was to determine how the livelihoods of village residents have been affected by the intensification of forest use, and the resulting loss of domestic access to traditionally used forest resources. Results indicate that changes in forest cover have resulted in a loss of livelihood options for village residents. Yet rather than being victimized by environmental change processes, this paper shows how villagers have responded by partnering with public and private actors to develop a community protected forest area that is now helping villagers to meet their livelihood needs. These findings suggest that sustainable livelihoods in rural regions of India require committed and scaled approaches involving local, public, and private actors.     

机械化学法修复柴油污染土壤的效率、产物及影响

针对常规污染土壤修复处理方法存在有毒降解产物、容易产生二次污染等问题,本研究采用行星球磨仪研究了机械化学法（MC）对柴油污染土壤的修复效能,利用GC/MS对柴油烃组分的降解产物进行分析,并采用SEM、XRD、BET、FTIR和TGA等方法对不同处理条件下的土壤样品进行表征.结果表明,MC处理在0.5~4.0 h内对土壤中总石油烃（TPH）的去除率可达95%以上.随着初始TPH浓度和球土质量比的升高,TPH去除率随之提高.采用MC处理后柴油组分降解难度顺序如下：烷烃<烯烃<环烷烃<芳香族化合物.在球磨处理4 h后,未检出有毒有害残留物质.球磨后土壤粒径变小,表面变粗糙,粘土矿物中的硅氧四面体暴露在土壤表面,矿物结构的结晶度逐渐降低,晶体结构逐渐破裂或变形,可在土壤表面形成富电子区域或促使土壤具有更高的反应活性,这是机械化学法高效降解柴油的主要机制.其次,土壤有机质的主要官能团受到破坏,纳米级孔隙容量降低,从而降低了土壤组分的吸附能力,增加了柴油的有效性,也有助于柴油的解吸和机械化学降解.此外,随着球磨时间的增加,土壤有机碳（SOC）含量先增加后下降,但均高于处理前.可见,MC处理可以快速彻底降解土壤中的柴油,且有利于增加土壤有机碳含量,对于石油烃污染土壤修复具有较好的应用潜力.     

Review and future of active disassembly

Disassembly has been widely accepted as a disadvantageous end-of-life activity, but with increasing pressures from directives, such as waste on electrical and electronic equipment, and with increasing pressures to become sustainable disassembly is becoming necessary. Current disassembly methods, including both manual and automated disassembly, need improvements to meet this necessity. This paper will introduce the improvements needed and suggest through literature the validity of active disassembly (AD) to provide these improvements. Past and current research will also be considered to provide a future path for AD. This future path for AD will consider a collaborative effort to solve problems with materials, environmental triggers and costs seen with AD.     

Empirically Analysis of the CO2 Emissions Embodied in Exports of China

Abstract

In this paper, using the input-output model, the author first calculated the CO₂ emissions embodied in exports of China in 2002 and 2007. Then, the author empirically analyzed problems existing in the composition of exported products and analyzed its possible reasons. The research results of this paper are as follows: Since China’s entry into WTO, the CO₂ emissions embodied in exports of China have been increasing rapidly; the value of exported products of high-carbon emissions industries accounts for a relatively higher proportion to China’s total exports value because China’s carbon intensive products have a certain competitive advantage. Additionally, this paper has put forward relevant suggestions based on these results.     

Formulation of criteria for pollution control on cement products produced from solid wastes in China

The process of producing cement products from solid waste can increase the level of pollutants in the cement products. Therefore, it is very important to establish a pollution control standard for cement products to protect the environment and human health. This paper presents acceptance limits for the availability of heavy metals in cement products which have been produced from solid wastes and explains how the limits have been calculated. The approach and method used to formulate these criteria were based on EN 12920. The typical exposure scenarios used in this paper involve concrete being used for drinking water supply pipelines and concrete pavements and are based on an analysis of typical applications of cement in China, and the potential for contact with water. The parameters of a tank test which was based on NEN 7375 were set in accordance with the environmental conditions of typical scenarios in China. Mechanisms controlling the release of heavy metals in concrete and a model for that release were obtained using the leaching test. Finally, based on acceptance criteria for drinking water and groundwater quality in China, limit values for the availability of heavy metals in concrete were calculated.     

Performance improvement potential of sensor embedded products in environmental supply chains

Environmental supply chain is a desirable alternative to traditional supply chain due to new and stricter environmental regulations by local governments and increasing consumer awareness towards environmental issues. The two most common types of environmental supply chains are reverse supply chains and closed-loop supply chains. In reverse or closed-loop supply chains, collected used products are subjected to one of four recovery options, viz., reuse, recycling, remanufacturing or disposal. Regardless of the chosen recovery option, all products are disassembled up to some level. However, there is a high level of uncertainty associated with the disassembly yield due to non-functional and/or missing components. Sensor embedded products (SEPs) is a viable approach to cope with this uncertainty since they involve sensors which can detect non-functional and/or missing components prior to disassembly. This study presents a quantitative assessment of the impact of SEPs on the various performance measures of a kanban-controlled disassembly line. First, separate design of experiments studies based on Orthogonal Arrays are carried out for conventional products and SEPs. Then, the results of paired t-tests comparing the two cases based on different performance measures are presented.     

气相色谱-质谱联用测定水产品中的合成麝香

利用快速溶剂萃取（ASE）和在线吸附净化,气相色谱-质谱（GC/MS）联用测定水产品中8种合成麝香.以正己烷为萃取溶剂,中性氧化铝为吸附剂,在100℃的温度下对水产品进行萃取.实验结果表明,方法的检测限为0.1—0.5 ng·g-1;在浓度1—80 ng·g-1的范围内,峰面积与样品浓度呈良好线性关系;8种合成麝香的回...