生态产品价值实现的国内外实践经验与启示

破解生态产品价值实现难题,贵在创新、重在实践.在生态产品价值实现相关方面,国内外相继开展了生动实践,形成了一批典型案例,积累了丰富经验,为我国生态产品价值实现提供了诸多启示.国内外实践经验表明,实现生态产品价值应充分依托生态资源实现生态产业化,找准自身特点定位促进产业生态化,建立政府主导下的市场化公共性生态产品补偿机制,通过优化国土空间带动土地溢价.借鉴国内外经验,结合我国生态产品价值实现存在的认识误区,提出了推动生态产品价值实现的建议:①充分认识生态资源是经济发展的优质资源,发挥人的主观能动性,通过生态产业化和产业生态化创造并实现生态产品价值.②改变原有补贴式、被动式和义务式的生态补偿方式,将市场机制融入公共性生态产品价值实现过程,以充分调动各方积极性.③转变传统城市建设和产业发展路径,探索生态产品价值实现载体,使生态产品与载体整合一体化实现"共生增值",让价值转移到载体中并通过载体交易实现其价值.      

全球农产品贸易网络及其演化分析

论文基于复杂网络视角,选择谷物、油料、纤维、糖料、果蔬、肉类6大类57种农产品,用1986—2013年间的贸易数据,构建全球农产品贸易网络,定量分析了这个复杂网络的特征和演化趋势。结果表明：1）1986—2013年,全球农产品贸易总量增加了2.26倍,其中油料作物增加幅度最大,增加了4.97倍。参与到全球农产品贸易网络中的国家（地区）逐年增多。2）拟合节点累积度分布的幂函数曲线,表明全球农产品贸易节点度分布具有不均匀性,节点度小的节点数量多,节点度大的节点数量少,满足幂律分布。“枢纽”节点不断成长。3）全球农产品贸易网络密度上升、平均路径长度下降、多元化趋势加强、网络结构复杂化等特征日益突出。4）我国农产品进口来源国（地区）集中程度较高,农产品进口潜在风险较大。一方面要进一步扩大开放,拓展进口来源国（地区）的数量,更好地利用国际资源;另一方面强化农业基础,提高农业综合生产能力,防范风险,保障粮食安全。     

AF-MBR处理海水养殖废水性能及膜污染特性

为了考察缺氧滤池-膜生物反应器（AF-MBR）对海水养殖废水的处理效果,在膜生物反应器中投加聚氨酯悬浮性填料,并以独立运行的膜生物反应器作为对照.结果表明,组合反应系统的总氮去除率和总有机碳（TOC）去除率分别为92%和90%,高于对照膜生物反应器的86%和85%.并且,前置缺氧滤池和填料的投加也明显缓解了膜污染.通过对两个反应器提取的溶解性微生物产物（SMP）和细胞胞外聚合物（EPS）进行红外光谱和三维荧光光谱的测定,确定了蛋白质和多糖为主要的膜污染物质,并且膜污染物质的减少缓解了膜污染现象.     

Analysis of the influencing factors of PAEs volatilization from typical plastic products

The primary emphasis of this research was to investigate the foundations of phthalate(PAEs) pollutant source researches and then firstly confirmed the concept of the coefficient of volatile strength, namely phthalate total content in per unit mass and unit surface area of pollutant sources. Through surveying and evaluating the coefficient of volatile strength of PAEs from typical plastic products, this research carried out reasonable classification of PAEs pollutant sources into three categories and then investigated the relationship amongst the coefficient of volatile strength as well as other environmental factors and the concentration level of total PAEs in indoor air measured in environment chambers.Research obtained phthalate concentration results under different temperature, humidity,the coefficient of volatile strength and the closed time through the chamber experiment. In addition, this study further explored the correlation and ratio of influencing factors that affect the concentration level of total PAEs in environment chambers, including environmental factors, the coefficient of volatile strengths of PAEs and contents of total PAEs in plastic products. The research created an improved database system of phthalate the coefficient of volatile strengths of each type of plastic goods, and tentatively revealed that the volatile patterns of PAEs from different typical plastic goods, finally confirmed that the coefficient of volatile strengths of PAEs is a major factor that affects the indoor air total PAEs concentration, which laid a solid foundation for further establishing the volatile equation of PAEs from plastic products.     

环境样品阿特拉津及降解产物分析方法进展

阿特拉津是一种世界范围广泛使用的除草剂。文章介绍了环境样品中阿特拉津及其降解产物分析的前处理技术和分析方法的研究进展,并为今后的研究方向提出了建议。     

饮用水消毒副产物--卤乙酸的检测

卤乙酸是饮用水氯化消毒中一类主要的消毒副产物,由于存在的广泛性和潜在的健康危害,许多国家和卫生组织相继将其列为饮用水常规监测项目,而我国至今还没有相关规定;为了更好地控制饮用水中卤乙酸的形成,世界各国科研人员先后研究和开发出了性能逐趋完善的多种分析检测方法;本文在国内外文献调研的基础上,对卤乙酸的各种分析检测方法进行了简要的介绍,并指明了今后的发展方向.     

Life Cycle Assessment as Part of Sustainability Assessment for Chemicals (5 pp)

Background LCA is the only internationally standardized environmental assessment tool (ISO 14040-43) for product systems, including services and processes. The analysis is done ‘from cradle-to-grave’, i.e. over the whole life cycle. LCA is essentially a comparative method: different systems fulfilling the same function (serving the same purpose) are compared on the basis of a ‘functional unit’ - a quantitative measure of this function or purpose. It is often believed that LCA can be used for judging the (relative) sustainability of product systems. This is only partly true, however, since LCA is restricted to the environmental part of the triad ‘environment/ecology - economy - social aspects (including intergenerational fairness)’ which constitutes sustainability. Standardized assessment tools for the second and the third part are still lacking, but Life Cycle Costing (LCC) seems to be a promising candidate for the economic part. Social Life Cycle Assessment still has to be developed on the basis of known social indicators.Method and Limitations LCA is most frequently used for the comparative assessment or optimization analysis of final products. Materials and chemicals are difficult to analyse from cradle-to-grave, since they are used in many, often innumerable product systems, which all would have to be studied in detail to give a complete LCA of a particular material or substance! This complete analysis of a material or chemical is evidently only possible in such cases where one main application exists. But even if one main application does exist, e.g. in the case of surfactants (chemicals) and detergents (final products), the latter may exist in a great abundance of compositions. Therefore, chemicals and materials are better analysed ‘from cradle-to-factory gate’, leaving the analysis of the final product(s), the use phase and the ‘end-of-life’ phases to specific, full LCAs.Conclusion A comparative assessment of production processes is possible, if the chemicals (the same is true for materials) produced by different methods have exactly the same properties. In this case, the downstream phases may be considered as a ‘black box’ and left out of the assessment. Such truncated LCAs can be used for environmental comparisons, but less so for the (environmental) optimization analysis of a specific chemical: the phases considered as ‘black box’ and left out may actually be the dominant ones. A sustainability assessment should be performed at the product level and contain the results of LCC and social assessments. Equal and consistent system boundaries will have to be used for these life cycle tools which only together can fulfil the aim of assessing the sustainability of product systems.     

Molarity provides better clarity – using molar-based data when evaluating chlorinated volatile organic compound impacted sites

Abstract

Chlorinated volatile organic compounds are common constituents observed at many contaminated groundwater sites. Common industry practice has been to measure these constituents in groundwater on a weight concentration basis (e.g. µg/l, mg/l). This paper highlights the use of molar-based concentrations, especially in the case of parent-daughter degradation sequences commonly observed with the chloroethene, chloroethane, and chloromethane families of compounds. Converting to molar-based concentrations provides the practitioner greater insight into groundwater plume behavior including better evaluation of degradation processes, remedial progress, possible commingling, and/or sourcing. For example, this paper provides a tank analogy to evaluate whether the commonly misinterpreted observation of “DCE-stall” may be occurring at a site. Multiple examples of the benefits of using molar-based concentration data are also summarized in a project case study presented herein. As demonstrated in this paper, molarity does provide better clarity and can be a powerful evaluation tool in the groundwater practitioner’s toolbox.     

Measurements of carbonyls in a 13-story building

BACKGROUND, AIM AND SCOPE: Formaldehyde and acetaldehyde are emitted by many mobile and stationary sources and secondary aldehydes are intermediates in the photo-oxidation of organic compounds in the atmosphere. These aldehydes are emitted indoors by many materials such as furniture, carpets, heating and cooling systems, an by smoking. Carbonyls, mainly formaldehyde and acetaldehyde, have been studied because of their adverse health effects. In addition, formaldehyde is a suspected carcinogen. Therefore, the concentrations of formaldehyde and acetaldehyde were determined to assess the inhalation exposure doses to carbonyls for people who work in a 13-story building and in order to evaluate the cancer hazard. METHODS: Carbonyl compounds in indoor and outdoor air were measured at a 13-story building located in Mexico City. The mezzanine, fifth and tenth floors, and the third level-parking garage were selected for sampling. Samples were collected in two sampling periods, the first from April 20 to 29, 1998 and the second from December 1 to 20, 1998. Carbonyls were sampled by means of DNHP-coated cartridges at a flow rate of 1 l min(-1) from 9:00 to 19:00 hours, during 2-hour time intervals and analyzed by HPLC with hours, during 2-hour time intervals and analyzed by HPLC with UV/VIS detection. RESULTS: Mean carbonyl concentrations were highest in the 3rd level-parking garage, with the formaldehyde concentration being the highest ranging from 108 to 418 microg m(-3). In working areas, the highest carbonyl arithmetic mean concentrations (AM) were observed on the 5th floor. Acetone and formaldehyde concentrations were highest in April ranging from 161 to 348 microg m(-3) (AM = 226) and from 157 to 270 microg m(-3) (AM = 221), respectively. Propionaldehyde and butyraldehyde were present in smaller concentrations ranging from 2 to 25 and 1 to 28 microg m(-3), respectively, considering all the samples. Mean indoor/outdoor ratios of carbonyls ranged from 1.8 to 9.6. A reduction of inhalation exposure doses of 41% and 45% was observed in the fifth floor air after the air conditioning systems had been repaired. Formaldehyde and acetaldehyde concentrations were higher in smoking environments. CONCLUSION: Indoor carbonyl concentrations were significantly greater than outdoor concentrations. Tobacco smoke seems to be the main indoor source of formaldehyde. After the air conditioning system was maintained and repaired (as was recommended), an important reduction in the emission of formaldehyde and acetaldehyde was achieved on all floors, except for the 3rd level parking garage, thereby reducing the inhalation exposure doses. RECOMMENDATION: The results obtained in this research demonstrated that maintenance of air conditioning systems must be carried out regularly in order to avoid possible adverse effects on health. Additionally, it is mandatory that isolated smoking areas, with air extraction systems, be installed in every public building.     

南水北调东线工程东平湖水质受水产养殖业影响分析

按照国家南水北调水质的要求,以东平湖实际情况为依据,分析水产养殖业对东平湖水质影响。