Leaching characteristics of bisphenol A from epoxy-resin pavement materials

We investigated the leaching characteristics of bisphenol A (BPA) from two kinds of epoxy-resin pavement materials, one containing epoxy resins (EPs) and the other containing epoxy-acrylate resins (EPAs). Both samples contained residual BPA monomer, at levels of 9.0?µg?g^?1 for the EP resin sample and 4.4?µg?g^?1 for the EPA resin sample. These amounts were larger than amounts previously measured for polycarbonate samples. The amount of BPA leached from the samples increased with temperature. The leaching of BPA from EP was more strongly affected by temperature than the leaching from EPA. The pH also affected the amount of leached BPA. The maximum leached amount was observed under alkaline conditions (pH 10.8) for both sample types. The amounts of BPA that might leach from pavement materials during 1?h of heavy rain were estimated to be 0.9?µg?m^?2 for EP and 3.5?µg?m^?2 for EPA. Our results indicate that EPs disposed of in waste landfills without any treatment may be a source of BPA in leachate at landfill sites.     

Effect of pH on the fate of fenazaquin in soil and water under laboratory-simulated condition

The persistence of fenazaquin (4-t-butylphenylethyl quinazolin-4-yl ether) was studied in three different soils, namely, Gangetic alluvial (pH 6.9), laterite (pH 5.3), and terai (pH 5.1) soil and in water at three different pH values (4.0, 7.0, and 9.2) under laboratory-simulated condition and samples were analyzed upto 60 days at regular intervals. Fenazaquin was applied at 5 and 10 µg g^?1 for each soil and at 0.2 and 0.4 µg mL^?1 to each water sample. Dissipation of fenazaquin in soil and water followed first-order kinetics irrespective of any treatments. The half-life of fenazaquin was found in the range of 47–64 days in soils and 3.49–37.6 days in water irrespective of dose. The persistence of fenazaquin in soil significantly increased in the order of Gangetic alluvial soil (pH 6.9) > laterite soil (pH 5.3) > terai soil (pH 5.1), whereas in water the trend of persistence was pH 9.2 ≥ pH 7.0 > pH 4.0. The dissipation of fenazaquin in soil and water was found to be dependent on pH irrespective of doses.     

Influence of temperature and pH on the effects of zinc and copper on proteolytic activities of the intestinal mucosa of planktivorous and benthophagous fishes and their potential preys

Influences of temperature (0 and 20°C) and pH (3.0, 5.0, and 7.4) on the effect of zinc (Zn) and copper (Cu) on proteolytic activities of intestinal mucosa in planktivorous (blue bream, bleak), bentophagous (bream, roach) fishes and their potential preys (pond snail Limnaea stagnalis, planorbid Planorbarius purpura, dreissena Dreissena polymorpha, midge larvae Chironomus sp., water flea Daphnia longispina and total zooplankton) are revealed in this article. Cu decreases the caseinolytic and hemoglobinolytic activities in both fish and their preys more than Zn at temperature 20°C and pH 7.4. Low temperature intensifies the negative effect of the metals on the protease activity in fish (in the case of Zn 5–10 times, in the case of Cu 5–30 times). In fish prey species, the negative effect of the metals on the proteinase activity may be more significant. The influence of pH on Zn and Cu effects is less pronounced than that of low temperature. Maximum reduction of enzyme activities is observed for the combined action of low temperature and pH as well as of the studied metals.     

A comprehensive model to estimate the simultaneous release of acidic and basic gaseous pollutants from swine slurry under different scenarios

Swine slurry is a source of atmospheric pollutants. Emissions of basic and acidic compounds from slurry are largely dependent on the surface pH. In a storage system, the pH at the surface layers changes over time due to the volatilisation of ammonia (NH₃), carbon dioxide (CO₂) and acetic acid (HAc). In this article, a comprehensive gas emission–pH (GE–pH) coupled model is proposed to describe the simultaneous release of acidic and basic gaseous pollutants from swine slurry. The model was applied to describe the release of NH₃, CO₂, HAc and hydrogen sulphide (H₂S) from standard slurries stored in animal houses, outside storage tanks and lagoons. The modelled results agreed well with values reported in the literature and could be reasonably interpreted. The key parameters affecting the release of gases were: initial pH, initial concentration of total ammonium nitrogen and inorganic carbon, slurry temperature and air velocity. This study suggests that future modelling studies on gas emissions from animal slurry should consider the concentration of inorganic carbon and the frequency in which the slurry surface is mixed or altered, because they affect the surface pH and the release of gaseous pollutants from slurry.     

Acidity of machine-made snow and its effect on pH and aluminum speciation in New England streams during spring thaw

The pH of machine-made snow and its effect on an acid-sensitive watershed in Vermont were studied. Spring runoff from snowmaking was found to be less acidic and to contain less dissolved inorganic aluminum. Dissolved inorganic aluminum has been associated with damage to aquatic life. The extensive use of machine-made snow by the ski industry in most of the northeast region of the US may be beneficial to aquatic life.     

酸胁迫对铜藻早期生长阶段的影响

为探究低pH胁迫对大型藻类早期生长的影响,以铜藻 Sargassum horneri 为研究对象,设置pH=3.5、4.5、5.5、6.5处理组和自然海水对照组,以不同处理时间分别对铜藻孢子和幼体进行胁迫实验。孢子实验中,于铜藻孢子附着前、后对其进行15、30、60、120 min的酸胁迫,以附着率和脱落率表征低pH对孢子附着的影响;幼体实验中,持续将铜藻幼体暴露于酸性条件下,以脱落死亡率表征pH对幼体的致死效应。结果显示,在短时间酸胁迫下,酸度对铜藻孢子附着的影响显著,附着率随pH值的下降而降低;胁迫时间对孢子的附着影响显著,附着率随胁迫时间的延长而降低,pH值与胁迫时间无交互作用;而当孢子已充分附着后,短期酸胁迫并没有显著影响孢子体的存活。在长时间酸胁迫下,与对照组相比,所有处理组铜藻幼体的存活率均显著降低。研究表明,低pH会对铜藻孢子、幼体的存活生长产生不利影响,并且这种影响在铜藻早期发育的不同阶段有所不同。     

东湖、汤逊湖和梁子湖沉积物磷形态及pH对磷释放的影响

文章采用淡水沉积物中磷形态标准测试程序(SMT)研究了东湖、汤逊湖和梁子湖沉积物中磷的形态分布,并比较了不同pH条件下沉积物磷释放特征的差异性。结果表明:东湖沉积物总磷质量分数最高,平均值1.232 mg.g-1,其次为汤逊湖(0.762mg.g-1),梁子湖沉积物总磷质量分数最低(0.572 mg.g-1);3个湖泊上覆水总磷质量浓度也表现出类似的变化规律,线性相关性分析显示上覆水中总磷质量浓度与沉积物总磷质量分数显著正相关。东湖和梁子湖沉积物总磷中无机磷和有机磷所占比例较接近,汤逊湖无机磷所占比例远低于有机磷。不同湖泊之间磷形态的分布并没有一定的规律性,湖泊的地理分布以及人为因素可能是造成磷形态差异的主要因素。当pH为2.0~7.0时,3个湖泊沉积物中溶解性活性磷(SRP)释放量均呈先增加后减小的趋势;当pH为7.0~12.0时,SRP释放量呈增加趋势。相关分析结果表明,SRP的释放与有机质的质量分数无显著相关性。方差分析结果显示3个湖泊沉积物在黏粒和粉粒组成上均没有显著差异(P>0.1),表明实验样品的粒径组成不是造成各个湖泊间磷释放差异的原因。不同pH条件下,SRP释放量与沉积物总磷质量分数显著正相关;酸性环境下,SRP释放量与酸式磷(HCl-P)的相关性优于碱式磷(NaOH-P),碱性环境下则刚好相反。     

一种pH荧光特性物质的合成及其特性研究

合成并表征了化合物:N,N'-二苯丙氨酸铵-3,4,9,10-苝四羧酸二酰亚胺(PDCDA).研究了pH值变化对其水溶液可见吸收光谱和荧光发射光谱的影响,探讨了荧光强度变化的机理,并利用PDCDA构建了具有“开-关”特性的pH荧光传感器.结果表明,PDCDA化合物水溶性好、荧光量子产率高,荧光强度与pH值间有着强烈的依赖关系,在碱性及中性溶液中荧光强度较强且稳定,而在酸性溶液中荧光被淬灭,PDCDA在一个非常窄的pH范围内荧光强度发生了明显的变化, pH值的改变对发光团π-π堆积产生影响进而导致其荧光发射光谱和可见吸收光谱发生改变.PDCDA可用作水溶液的pH荧光传感器,检测pH值范围为3.8~6.3.     

pH值对SBR单级好氧生物除磷的影响

在2个序批式反应器(R1、R2)中,以合成废水为对象,研究了不同pH值(R1:pH 8±0.2; R2:pH 7±0.2)对单级好氧生物除磷的影响;并通过比较周期中主要储能物质的变化,探讨了产生不同除磷效果的原因.结果表明,R1与R2均具有较高除磷性能, R1与R2中的平均去除率分别为94.9%,83.5%,pH值对SBR单级好氧生物除磷有一定的影响.导致R1具有较高除磷性能的原因是其对聚磷的依赖程度更大.好氧段R1糖原积累量低于R2(R1为1.42mmol/g, R2为1.55mmol/g),但降解量却高于R2(分别为1.41,1.19mmol/g);静置期,R1中糖原无明显变化,R2中则观察到明显的糖原降解.R1与R2均有明显的释磷现象, R1释磷量高于R2(释磷量分别为9.65,7.33mg/L).整个周期中,R1中PHA 无明显变化,而R2中则在好氧段有少量减少,静置期有少量上升.     

经典化学法结合pH/ORP自控系统处理电镀废水的工程应用

电镀废水是我国三大工业污染废水之一,该废水污染严重、水质复杂、水量大。针对该废水的特点,实行清污分流,各类废水先预处理再综合处理的原则,并采用经典化学法结合pH/ORP自控系统处理技术,废水经处理后可达GB8978-1996《污水综合排放标准》一级排放标准。