综合利用石墨化废旧辅料的新方法

炭素石墨制品生产过程中产生的石墨化废旧辅料,在炭素行业是最有开发潜力的固体废物。通过初加工可实现回收利用,经研制开发新产品可实现综合利用。该综合利用方法表明,在实现综合利用中可获得大的经济效益和可观的社会效益。      

多孔填充材料的防火防爆机理及应用

在液化气体、燃料储罐内填充多孔材料,可有效地减少或避免储罐发生爆炸事故.本文分析了这类材料的防爆机理并简要介绍了其应用情况.     

赶不上定理及其循环经济理论意义

阐释了在一个正常发展的长时期的宏观经济体系中人均物质消费量永远上升的观点,研究了人均GDP增长速度和物质利用强度变化速度之间的数量关系,根据二者变化速度相对快慢提出和证明了保证人均物质消费量上升的充分必要条件即赶不上定理.利用赶不上定理,论述了循环经济是解决人类经济增长的无限性与自然资源有限性之间的矛盾的根本途径,当人均GDP增长速度为零时进行结构调整必然降低人均物质消费量,引发社会不安定现象;当人均GDP增长速度足够快时,可以大幅度进行结构调整而不降低人均物质消费量.     

Radiation Crosslinking of Poly(Butylene Succinate) in the Presence of Inorganic Material and Its Biodegradability

Three kinds of poly(butylene succinate)s (PBS) with different molecular weight were irradiated with electron beams in the presence of inorganic material. Fourteen kinds of inorganic materials were used in this work. The presence of inorganic material inside cross-linked PBS samples enhances the yield of gel formation. The heat stabilities of PBS samples were checked; it was found that silicon dioxide and carbon black significantly improve these properties. Enzymatic and soil burial tests were performed; the presence of these inorganic materials in cross-linked PBS accelerates the rate of biodegradation.     

Life cycle assessment of biofibres replacing glass fibres as reinforcement in plastics

This article aims to determine the environmental performance of China reed fibre used as a substitute for glass fibre as reinforcement in plastics and to identify key environmental parameters. A life cycle assessment (LCA) is performed on these two materials for an application to plastic transport pallets. Transport pallets reinforced with China reed fibre prove to be ecologically advantageous if they have a minimal lifetime of 3 years compared with the 5-year lifetime of the conventional pallet. The energy consumption and other environmental impacts are strongly reduced by the use of raw renewable fibres, due to three important factors: (a) the substitution of glass fibre production by the natural fibre production; (b) the indirect reduction in the use of polypropylene linked to the higher proportion of China reed fibre used and (c) the reduced pallet weight, which reduces fuel consumption during transport. Considering the whole life cycle, the polypropylene production process and the transport cause the strongest environmental impacts during the use phase of the life cycle. Since thermoplastic composites are hardly biodegradable, incineration has to be preferred to discharge on landfills at the end of its useful life cycle. The potential advantages of the renewable fibres will be effective only if a purer fibre extraction is obtained to ensure an optimal material stiffness, a topic for further research. China reed biofibres are finally compared with other usages of biomass, biomaterials, in general, can enable a three to ten times more efficient valorisation of biomass than mere heat production or biofuels for transport.     

Risk assessment as a management tool for inactive hazardous materials disposal sites

A protocol for risk assessment at inactive hazardous material disposal sites has been developed by using mathematical modeling and estimation techniques. Compared with ranking models, the protocol yields quantitative results with a minimum of input data that may be used to select among management, scientific, or engineering alternatives for the site. This article reviews the background, presents the protocol, illustrates the application of the protocol, and demonstrates the use of the protocol in conjunction with thecritical environmental area concept. Comparisons are also presented with other model systems such as the EPA HRS.     

烟火材料的自燃与对策

从物质自燃现象的一般属性出发，通过对自燃加速曲线的分析，引伸出了烟火材料自燃特有的内涵。按照放热反应的不同形式对可自燃的烟火材料进行了分类。提出了发生自燃事故的统计规律以及防止事故的一些技术和管理措施。     

Renewable Resources and Waste Recycling

In this paper we consider an endogenous growth model involving, among other inputs, a renewable resource and secondary materials. Using this analytical framework we explain the effects of waste recycling on the growth rate of the economy, that we take into account. The effects of secondary materials production on the utility and dynamics of renewable resources are also studied. Furthermore, we consider how taxes and subsidies, levied on natural resources and granted for secondary materials, influence the dynamics of the economy during the transitional phase and the stationary growth path. Finally, the validity of Hotellings rule and the effects of waste recycling on labor productivity are the conclusive topics of our research.     

超临界二氧化碳动力系统耐热材料高温腐蚀研究进展

主要介绍了超临界二氧化碳环境下耐热材料的抗腐蚀性能,重点阐述了超临界二氧化碳温度、压力、杂质气体H2O和含硫气体对耐热材料腐蚀行为及抗腐蚀性能的影响规律;同时论述了超临界二氧化碳关键高温部件材料选型及其腐蚀机理研究。最后介绍了耐热材料在超临界二氧化碳中的腐蚀机理及未来的研究方向。     

废电路板非金属材料再生木塑产品环境安全性评价

为了评价废电路板非金属材料再生产品使用过程中的环境安全性问题,本文针对非金属材料再生产品的特性,参考相关评价标准,结合目前现有的环境危害评价方法和人体健康风险评价,构建了再生产品在使用过程中环境安全性评价模型.收集A、B两种再生木塑产品进行评价试验,评估其对环境和人体健康的潜在风险和危害.结果显示在不考虑水体稀释作用情况下,两种再生木塑产品对I类地表水均存在极度或重度污染的可能,对于其他类地表水环境风险较小,应避免在源头水等区域使用;对于地下水,产品B污染指数大于1,具有一定的环境风险;但是考虑在稀释情况下（5%）,两种再生产品对于地下水的污染指数均小于1;两种再生木塑产品的非致癌风险指数分别为0.03和0.41,均小于1,对人体健康的危害作用不明显.本文可为非金属材料再生木塑产品环境安全性管理提供评价标准和参考,有利于促进废弃电器电子产品资源化和无害化技术的发展．