长三角典型城市公交车实际道路细颗粒物排放测试

为研究长三角典型城市公交车细颗粒物排放特征,采用便携式排放测试系统（PEMS）,对上海、杭州和苏州三大城市的8辆典型城市公交车开展实际道路细颗粒物排放实验。研究结果表明：长三角典型城市车辆的实际道路平均车速为22.7 km/h,怠速比例为20.4%,加减速比例为54.5%;在稳态行驶工况下,随车速增大,公交车颗粒物质量及数量排放呈逐渐增大趋势;在20 km/h车速范围内,上海国III、国IV和苏州国III公交车颗粒数浓度呈双峰粒径分布,其他公交车均为单峰分布;随比功率的增大,公交车颗粒质量呈逐渐增大的趋势,国IV公交车颗粒数量呈先下降再增大趋势,国III公交车颗粒数量呈上升趋势;公交车颗粒质量综合排放因子为0.8~189 mg/km,颗粒数量综合排放因子为6.2×10¹²~9.6×10¹⁴#/km。     

高效率颗粒物微物理模型简介与重污染过程应用分析

中国细颗粒物(PM2.5)导致的空气污染和雾霾天气问题越来越突出,在低层对流层中很多地方都有显著的二次颗粒物生成过程,因此对颗粒物物理化学转化过程的研究具有重要意义,其转化过程对空气质量模式模拟和预报的准确性有重要影响。高效率颗粒物微物理(APM)模型经过近20多年的研究和发展,在全球化学传输模型(GEOS-Chem)、区域性气象和化学预报模型(WRF-Chem)通用地球系统模型(CESM-CAM5)等气象及环境空气质量预报模型中取得了很好的应用验证,能够在全球/区域等不同尺度对粒子生成、长大、凝聚、消除等微物理过程以及气溶胶光学厚度(AOD)、直接/间接辐射强迫等进行模拟。应用GEOS-Chem-APM模式模拟了2014年2月京津冀区域的重污染过程。结果显示,湿度模拟的准确性对其他物理和污染物浓度等模拟结果有重要作用;2月20—26日的重污染过程模拟结果与实际观测较为吻合,主要污染特点是较高的湿度(90%以上),同时,二次颗粒物和包裹了二次物种的一次颗粒物(黑碳/有机碳)是低能见度的最大贡献者。     

基于PSO-SVM算法的环境监测数据异常检测和缺失补全

针对环境监测数据异常和数据缺失问题,提出了基于支持向量机的粒子群优化数据异常检测和缺失补全算法。利用粒子群优化算法选取较优的支持向量机训练参数组合,以此建立非线性的支持向量机模型,并利用结果模型对测得的真实数据拟合预测。以宁夏回族自治区某污水处理厂的污染物测量数据作为实验数据,结果表明,利用该算法预测数据的准确率可达97.977%,检测异常数据准确度高,缺失数据补全正确。     

测定单个粒子的薄膜法及其应用

本文介绍改进后的薄膜法,主要是形态分析法和复合薄膜法。它们都是基于粒子和薄膜反应生成物的形态特征通过电镜来确定粒子成分的。前者可以检测单个酸性粒子,检出下限为７ ×１０－ １９ｇ;后者能同时检出一个粒子中所含的ＮＯ－３ 和ＳＯ２ －４ ,检出下限分别为３ ×１０－ １５ｇ 和７ ×１０－ １８ｇ。利用该方法对广州大气粒子进行了观察,结果表明改进后的薄膜法完全适用于对单个粒子的观察和测定。     

Water Network Synthesis Using Mutation-Enhanced Particle Swarm Optimization

Different techniques for the synthesis of industrial water reuse/recycle networks have been developed in recent process integration research. These tools range from graphical pinch analysis approaches to mathematical programming models. The latter have the advantage of being flexible enough to incorporate various water network constraints, but in many cases these are often non-linear, thus making the identification of global optima difficult. Recent work has demonstrated the effectiveness of metaheuristic algorithms such as particle swarm optimization (PSO), for finding good solutions these problems. This work describes the use of a modified PSO for solving mixed integer non-linear programming (MINLP) models for water network synthesis. By incorporating a mutation operator for the binary variables in the model, the algorithm is able to escape sub-optimal network topologies and proceed towards better solutions than can be found with ordinary PSO. Two case studies involving water recycle/reuse are used to demonstrate the new design methodology.     

基于粒子群算法的城市垃圾中转站的空间布局研究

随着城市化的进程，垃圾处理设施成为影响城市化质量的重要指标。依据人们实际所关注的垃圾处理设施的总成本和负效应两个因素，在前人研究的基础上，建立了垃圾收运多目标模型，使得总成本和负效应最优化。根据模型设计了粒子群算法，该算法属于智能算法，且精度高，收敛快，在许多领域也得到广泛应用。用设计的粒子群算法并结合案例求出了Pareto最优解，给出三种决策方案，验证了模型和算法的有效性和可行性，为决策者提供了一种理论参考。     

降解有机污染物的新方法—半导体微粒光催化降解

以半导体颗粒作为光催化剂，用光和氧化剂使有机物彻底转化成二氧化碳和水。这是近十年来正在逐步完善的降解有机物的新方法。许多国家正在投入大量资金和人力进行半导体光催化反应的基础研究及应用基础研究。     

Retrieval of refractive index of ultrafine single particle using hygroscopic growth factor obtained by high sensitive surface plasmon resonance microscopy

When exposed to different relative humidities (RHs), the optical properties of atmospheric aerosols will change because of changes in the aerosol particle size and complex refractive index (RI), which will affect haze formation and global climate change. The potential contributions of ultrafine particles to the atmospheric optical characteristics and to haze spreading cannot be ignored because of their high particle number concentrations and strong diffusibility; measurement of the optical properties of wet ultrafine particles is thus highly important for environmental assessment. Therefore, a surface plasmon resonance microscopy with azimuthal rotation illumination (SPRM-ARI) system is designed to determine the RIs of single particle aerosols with diameters of less than 100 nm in the hygroscopic growth process. Measurements are taken using mixed single particles with different mass ratios. The RIs of mixed single aerosols at different RHs are retrieved by measuring the scattering light intensity using the SPRM-ARI system and almost all the RIs of the bicomponent particles with different mass ratios decrease with increasing water content under high RH conditions. Finally, for each of the bicomponent particles, the maximum standard deviations for the retrieved RI values are only $2.06\times {10}^{-3}$, $3.08\times {10}^{-3}$ and $3.83\times {10}^{-3}$, corresponding to the NaCl and NaNO₃ bicomponent particles with a 3:1 mass ratio at 76.0% RH, the NaCl and glucose particles with a 1:3 mass ratio at 89.0% RH, and the NaCl and OA particles with a 1:1 mass ratio at 78.0% RH, respectively; these results indicate that the high-sensitivity SPRM-ARI system can measure the RI effectively and accurately.     

喷嘴直径对降尘效果影响的试验研究

为提高喷雾降尘效率,以改善作业环境,有必要研究喷嘴直径与降尘效果间的关系。基于自行设计的喷雾降尘试验系统,采用马尔文实时高速喷雾粒度分析仪、高速摄像仪及粉尘浓度测定仪对不同直径喷嘴的雾化特性参数和降尘效率进行测定。结果表明,在相同喷雾压力下,随着喷嘴直径的增大,全尘降尘效率持续增加,而呼吸性粉尘降尘效率先增加后减小,并在喷嘴直径为1.5 mm时达到最大值;在耗水量相同的情况下,随着喷嘴直径的增大,全尘和呼吸性粉尘降尘效率均下降。在井下喷雾降尘中,当耗水量不受限制时,为同时确保全尘和呼吸性粉尘降尘效率,宜选择直径为1.5 mm的喷嘴;当耗水量受限制时,宜选择直径为1.2 mm的喷嘴。     

Insights into metals in individual fine particles from municipal solid waste using synchrotron radiation-based micro-analytical techniques

Excessive inter-contamination with heavy metals hampers the application of biological treatment products derived from mixed or mechanically-sorted municipal solid waste (MSW). In this study, we investigated fine particles of < 2 mm, which are small fractions in MSW but constitute a significant component of the total heavy metal content, using bulk detection techniques. A total of 17 individual fine particles were evaluated using synchrotron radiation-based micro-X-ray fluorescence and micro-X-ray diffraction. We also discussed the association, speciation and source apportionment of heavy metals. Metals were found to exist in a diffuse distribution with heterogeneous intensities and intense hot-spots of < 10 μm within the fine particles. Zn-Cu, Pb-Fe and Fe-Mn-Cr had significant correlations in terms of spatial distribution. The overlapped enrichment, spatial association, and the mineral phases of metals revealed the potential sources of fine particles from size-reduced waste fractions (such as scraps of organic wastes or ceramics) or from the importation of other particles. The diverse sources of heavy metal pollutants within the fine particles suggested that separate collection and treatment of the biodegradable waste fraction (such as food waste) is a preferable means of facilitating the beneficial utilization of the stabilized products.