活性炭吸附室内空气中挥发性有机化合物

活性炭吸附室内空气中挥发性有机化合物的１０％穿透时间与气相浓度及挥发性有机化合物的种类有关,通过对苯、甲苯和丙酮的实验研究,得出了由高浓度估算室内低浓度时炭床１０％穿透时间的经验公式ｔｂ,１＝ｔｂ,ｈ（Ｃ０,１／Ｃ０,ｈ）＾ａ,其中ａ值是与炭床性能及挥发性有机化合物种类有关的参数,可通过实验确定。     

The evolution of mass balance models of persistent organic pollutant fate in the environment

Current approaches to modelling the fate of persistent organic pollutants (POPs) in the environment have evolved in response to four dominant characteristics of these substances; namely: (1) the presence of POPs in virtually all environmental phases and the ease with which they move from one to the other requires multi-compartmental modelling. Describing transport across phase boundaries becomes as, or even more, important as quantifying transport within the phases; (2) POPs may persist in the environment for many decades. For chemicals that 'have time', concepts such as equilibrium partitioning and steady-state become more important than for short-lived substances whose fate is more controlled by the rates of transformation; (3) measuring POPs is difficult and expensive and observed concentrations of POPs are not available in high spatial or temporal resolution. Consequently, high resolution tends not to be a high priority in POP models; and (4) detrimental effects of POPs often manifest themselves in top predators, which has led to a focus on modelling biotic uptake and transfer within food chains. The task of building a POPs model is viewed as combining the four 'building blocks' of partitioning, transport, transformation and source data with the help of the law of the conservation of mass. Process models, evaluative models, models of real local, regional and global fate, as well as biological uptake models are presented and references to numerous examples are provided. An attempt is made to forecast future directions in the field of POPs modelling. It is expected that modelling techniques that do not rely on quantitative emission estimates as well as approaches that take into account spatial, temporal and climatic variability as well as parameter uncertainty will increase in importance. Finally, the relationship between modelling POPs and models of other pollutant issues is addressed, as are potential interactions between POPs and pollutant issues such as eutrophication, acidification and global climate change.     

Organic residue decomposition: The minicontainer-system a multifunctional tool in decomposition studies

The Minicontainer-test, first described by Eisenbeis (1993), was designed to study the kinetics of organic residue decomposition at a microsite level. It is derived from the litterbag technique and consists of polyethylene minicontainers (volume about 1.5 cm³) filled with a test substrate (litter, straw, cellulose, etc.). The minicontainers (MCs) are closed at either end with plastic gauze discs of variable mesh size (e.g. 20 μm, 250 μm, 500 μm or 2 mm). A definite number of such units are inserted into PVC-bars, which can be implanted into the soil horizontally or vertically, or be exposed on the soil surface horizontally. The bars are very stable and can be exposed in different environments for months to years. If required, the bars can be removed temporarily and stored, e.g. during soil cultivation. Should fresh litter be used, two phases of decomposition can be distinguished: a fast initial phase, which can be mainly related to the effect of leaching, and a second slow phase depending mainly on the activity of soil organisms and litter quality. Several questions can be addressed to investigations using MCs, e.g. 1) parts of the soil fauna which are involved in decomposition (nematodes, microarthropods, and smaller specimens of the macrofauna, e.g. enchytraeidae, diplopods and dipteran larvae) can be extracted from the litter substrate using a miniscale high gradient extractor, 2) the organic mass loss of litter can be determined, 3) microbial biomass (C_mic, N_mic) can be assessed by fumigation extraction and 4) microbial activity (respiration) in the test substrate can also be assessed by use of standardised methods. Compared to litterbag studies, the larger number of small replicate units improves the statistical evaluation. Until today the Minicontainer-test has been applied in forestry and agriculture, e.g. studying the effects of liming, soil restoration and the application of insecticides, e.g. Diflubenzuron (Dimilin) and Btk (Bacillus thuringiensis var.kurstaki).     

小型好氧堆肥设备处理有机垃圾

针对我国生活垃圾的特点,提出了厨余等有机生活垃圾单独收集,在产生源头进行好氧堆肥处理。研制了好氧堆肥设备,由加热装置、通风装置、冷凝水收集和回灌装置,以及与该生物堆肥设备配套的生物过滤除臭装置、自控系统和数据采集软件几部分构成。自控系统由氧气、温度、湿度三路传感器以及2个控制器构成,并与加热装置、通风装置连接,能满足物料加热、供氧和散热的要求。本研究通过为期30 d的试运行实验表明,物料快速升温并稳定保持在高温阶段(50～60℃),物料中的氧气浓度保持在14%～16%范围内。在堆肥实验结束时,物料的含水率降至36.4%,有机质含量降至49%,另外,通过好氧速率指标也可判定物料达到腐熟。     

有机物的结构──活性定量关系及其在环境化学和环境毒理学中的应用

有机物的结构──活性定量关系及其在环境化学和环境毒理学中的应用王飞越（北京大学城市与环境学系，北京１００８７１）陈雁飞（武汉大学环境科学系）最近几十年来，有机物结构──活性定量关系研究（ＱＳＡＲ，ＱｕａｎｔｉｔａｔｉｖｅＳｔｒｕｃｔｕｒｅ－Ａｃｔｉｖ...     

Competition between phenanthrene, chrysene, and 2,5-dichlorobiphenyl for high-energy adsorption sites in a sediment

We determined the maximum amounts of added phenanthrene, chrysene, and 2,5-dichlorobiphenyl sorbed onto high-energy adsorption sites in a sediment on bi-solute experiments. The bi-solute pairs were phenanthrene/chrysene and phenanthrene/2,5-dichlorobiphenyl. On the bi-solute sorption experiments, one solute was introduced and equilibrated with sediment prior to addition of the second solute. The values for the maximum amounts adsorbed onto high-energy sites revealed that, after equilibration of the first solute, still some high-energy sites could be occupied by the second solute. Phenanthrene, chrysene, and 2,5-dichlorobiphenyl seem to share about 30% of the accessible high-energy adsorption sites in the sediment employed.     

对羟基苯甘氨酸生产废水的处理工艺研究

对羟基苯甘氨酸废水属于高浓度难处理有机废水,针对生产工艺的特点,采取了废水分类处理的新路线.试验结果表明,高浓度废水经过物化处理后,苯酚的回收率达到95%,每日回收硫酸铵约6t;低浓度废水采取水解酸化-接触氧化-沉淀-活性炭吸附工艺是可行的,COD、BOD5、NH3-N及挥发酚的总去除率分别为95.6%、94.6%、93.7%和99%.     

高锰酸盐复合剂强化饮用水除污染生产性研究

采用依时间序列进行对比的方法,考察了高锰酸盐复合剂(PPC)对饮用水源的强化除污染效能。生产性实验结果表明,PPC具有优良的强化混凝和强化过滤效能,能显著降低水厂沉后水和滤后水的浊度、COD_Mn、UV₂₅₄等水质指标。与未投加时相比较,水厂投加PPC后沉后水和滤后水浊度分别降低了25%和33.3%,沉后水和滤后水COD_Mn去除率分别提高了15.3%和11.5%,UV₂₅₄去除率分别提高了16.3%和9.5%。同时,GC/MS分析表明PPC能有效去除水源水中的多种微量有机污染物,显著提高饮用水的化学安全性。PPC通过高锰酸钾的氧化作用,水合二氧化锰的吸附作用,以及各组分间的协同强化作用,显著提高了对水中污染物质的去除效率。     

废水产氢产酸/同型产乙酸耦合产酸条件优化

为了更好地发挥产氢产酸/同型产乙酸耦合系统在废水厌氧发酵生产乙酸方面的优势,有必要寻找一种简单有效的方法以获得该系统产酸的优化条件.利用经过加热处理并活化的厌氧污泥作种泥,以模拟废水中的葡萄糖为底物,针对发酵时间、底物浓度、种泥浓度、初始pH进行4因素10水平均匀设计实验,得到了乙酸生产指标与产酸条件之间关系的回归方程;也得到了以高乙酸产量为主要目标导向同时兼顾高乙酸产率和高乙酸生产强度目标的优化条件;优化条件实验乙酸浓度比均匀设计中最高乙酸浓度提高20%左右.研究表明,将均匀设计应用于废水产氢产酸/同型产乙酸耦合产酸条件优化,可以避免盲目性,迅速获得满意结果.     

淀山湖沉水植物死亡分解过程中营养物质的释放

测定了上海淀山湖5种常见沉水植物的营养成分含量及其死亡后在好氧(DO>3.5 mg/L)或低氧(DO<3.5 mg/L)状态下分解释放TN、TP和有机物(以高锰酸盐指数计,下同)等营养物质的动态过程,并对营养物质释放强度与营养成分含量的相关性进行了分析.结果表明, 5种沉水植物中,金鱼藻的TN和TP含量最高,质量分数分别为(4.07±0.22)%和(0.99±0.09)%;好氧状态下TN和有机物的释放强度大于低氧状态,两种状态下TP的释放强度没有显著差异;TP的释放比TN快,一般需10 d左右,而TN和有机物的释放分别需要29 d和20 d左右;在好氧状态下,NO-2-N、NO-3-N和可溶性总磷酸盐的平均释放强度与植物TN含量呈显著正相关(p<0.05),NH 4-N的平均释放强度与植物TP含量呈显著正相关(p<0.05);在低氧状态下,NO-2-N的平均释放强度与植物TN含量、NO-3-N的平均释放强度与植物TP含量分别呈显著正相关(p<0.05);有机物的平均释放强度与植物TP含量呈极显著负相关(p<0.01).