固相萃取-高效液相色谱法测地表水中11种酚类化合物

建立了固相萃取-高效液相色谱法同时测定地表水中11种酚类化合物的方法。水样经过全自动固相萃取仪富集,以HLB柱为萃取柱,乙腈(含1%乙酸)为洗脱剂,用高效液相色谱仪分析定量。该方法在0.5~5.0 mg/L范围内线性良好,相关系数为0.999 6~0.999 9,11种酚类化合物的纯水加标回收率为82.0%~111%,地表水加标回收率为98.5%~116%,精密度为3.58%~4.67%,检出限为1×10-4~5×10-4mg/L,该方法简单实用、准确可靠,可用于地表水中酚类化合物的同时测定。     

太阳光Fenton氧化对含酚废水生物降解影响研究

研究了太阳光Fenton氧化预处理对含酚废水生物降解性的影响及太阳光Fenton氧化-生化法联合工艺对煤气含酚废水的处理效果。结果表明,煤气含酚废水和模拟含酚废水的生物降解性均较差,太阳光Fenton氧化预处理可明显提高含酚废水的生物降解性,随着H2O2投加量的增加,废水的BOD5/COD比值逐渐增大,生物降解性明显增强。煤气含酚废水直接进行生化处理的COD和挥发酚去除率均较低。当太阳光Fenton氧化过程H2O2用量为22.5%理论投加量时,采用太阳光Fenton氧化-生化法联合工艺可使煤气含酚废水的COD由1357mg/L降低至104mg/L,挥发酚由198.2mg/L降低至0.47mg/L,COD和挥发酚均达到国家二级排放标准。     

水体中酚类化合物分光光度分析方法的研究

对国内外水体中酚类化合物现有的分光光度分析方法进行了文献综述 ,内容包括可见光分光光度法、紫外光分光光度法、荧光分光光度法和流动注射分光光度法。在总结归纳的基础上 ,提出了水体中酚类化合物分光光度分析方法的发展方向。     

Ferrioxalate-mediated photodegradation and mineralization of 4-Chlorophenol

INTENTION, GOAL, SCOPE, BACKGROUND: Advanced oxidation processes are powerful methods which are capable of transforming refractory, nonbiodegradable and/or toxic organic compounds into harmless end products such as carbon dioxide and water. However, one commen problem of all advanced oxidation processes is the high demand of electrical energy for ultraviolet lamps, which causes high operational costs. Minimization of the required irradiation time, and therefore the energy consumption, by optimization of other reaction conditions such as catalyst-oxidant type and concentration, pH, temperature, pollutant/oxidant ratio etc., therefore continues to gain importance. OBJECTIVE: The main objective of this study was the minimization of the required irradiation time through optimization of the use of a newly patented catalyst, ferrioxalate, and also to compare the performance of this catalyst with the performance of other AOPs. METHODS: Oxidation of 4-chlorophenol by photo-Fenton process using potassium ferrioxalate as a mediator was studied in a lab scale photoreactor. The influence of parameters such as hydrogen peroxide and ferrioxalate concentrations, initial pH, power-output, oxalate/iron ratio and different iron sources was evaluated. An upflow photoreactor equipped with a 1000 Watt high-pressure mercury vapour lamp and operating in a recirculation mode was used during photodegradation experiments. The extent of the reduction of 4-chlorophenol, Total Organic Carbon and Chemical Oxygen Demand was used to evaluate the photodegradation reaction. RESULTS AND DISCUSSION: The optimum pH range observed was found to be 2.7-3. The efficiency of 4-chlorophenol oxidation increased with increasing concentrations of hydrogen peroxide and ferrioxalate, reaching a plateau after the addition of 10 and 0.072 mM of those reagents, respectively. Using an Oxalate/iron ratio of 12 was 18% less efficient than using a ratio of 3:1. The efficiency increased with increasing radiation power. However, this increase was not linear. The UV/ferrioxalate/H2O2 process, by which complete mineralization of 100 mg l(-1) 4-chlorophenol was achieved in 20 min of total reaction time, was the most efficient process among the alternatives applied. CONCLUSIONS: The use of ferrioxalate as the catalyst was found to be more efficient than the use of Fe(II) and Fe(III) iron species. It was possible to completely mineralize 4-chlorophenol. RECOMMENDATION AND OUTLOOK: The results of this study demonstrate that the ferrioxalate-mediated degradation of 4-chlorophenol requires less irradiation times than other advanced oxidation processes. There are mainly 19 phenol isomers and other toxic and nonbiodegradable organic compounds. We recommend that similar studies should be performed on many such compounds in order to attain a clear understanding of the performance of this catalyst. Because of its light sensitivity, this catalyst should be used immediately after its preparation. The use of low pressure mercury vapour lamps in this process should also be considered, since low power outputs may be enough for the process.     

AO-80/201树脂/BIIR共混阻尼橡胶动态力学性能研究

目的提高丁基橡胶的阻尼性能。方法在溴化丁基中添加201酚醛树脂、受阻酚AO-80制备AO-80/酚醛树脂/BIIR共混阻尼橡胶,采用动态力学分析(DMA)方法研究共混橡胶的动态力学性能。结果 DMA测试表明,随着201酚醛树脂硫化剂用量的增大,使得材料的最佳使用温度向高温方向移动,201树脂添加10份时BIIR/酚醛树脂共混橡胶可获得最大损耗因子0.81。AO-80/酚醛树脂/BIIR共混橡胶中,AO-80的添加使材料的最佳使用温度向高温方向移动,同时AO-80/酚醛树脂/BIIR共混胶tanδ-T曲线呈现双峰特征。当AO-80添加量为30份时,材料tanδ0.3的温域为-40~60℃。同时研究了不同使用频率和不同使用温度下材料的动力学性能,研究表明,随使用频率的增高,材料的最佳使用温度向高温方向移动,材料使用温度的降低等效于高频作用。最后以约束阻尼层处理方法对新研材料进行了减振性能评估,新研材料减振降噪效果从剩余峰数、阻尼系数、剩余峰高三个方面均优于国外某先进材料。结论 AO-80/酚醛树脂/BIIR共混阻尼橡胶材料具有更好的减振降噪效果。     

The relationship between metal composition,phenolic acid and flavonoid content in Imleria badia from non-polluted and polluted areas

ABSTRACT

The aim of this study was to determine the elemental composition, phenolic content and composition and antioxidant properties of Imleria badia (Fr.) Vizzini (former names Boletus badius (Fr.) Fr., and Xerocomus badius (Fr.) E.-J. Gilbert) fruiting bodies collected from sites with different levels of pollution. Imleria badia was relatively tolerant to soil contamination with toxic elements and was able to grow in As, Cd, Hg and Pb concentrations exceeding 15, 2.9, 0.4 and 77 mg kg^?1, respectively. The concentration of elements in soil was reflected in the element content in I. badia. The fruiting bodies from polluted sites exhibited significantly higher content of all the analyzed elements. Among 21 individual phenolic compounds only protocatechiuc and caffeic acids, and quercetin were determined in fruiting bodies of I. badia. The differences between the concentration of the quantified phenolic compounds and the total flavonoid content in fruiting bodies of I. badia from unpolluted and polluted sites were not significant. However, the greatest total phenolic content was found in fruiting bodies from the polluted areas. The antioxidative capacity of mushrooms collected from heavily polluted sites was lower than those growing in unpolluted areas. The concentrations of some metals in soil and fruiting soil were positively correlated with phenolic content and IC₅₀.     

危化品泄漏围堵材料理化性能及燃烧行为研究

针对易燃液体泄漏围堵问题,开发了1种可快速发泡的酚醛泡沫材料,对其表观密度、耐水性、耐酸性、耐碱性、氧指数、燃烧行为及产烟成分进行系统研究。研究结果表明:发泡材料在中性和酸性液体环境中表现出良好的耐受性;在碱性环境中稳定性降低,由于共轭效应,导致分子中的H+遇碱性环境发生中和反应;发泡材料的氧指数和锥形量热测试参数（热释放速率、总热释放量及总生烟量等）表明该材料具有良好的耐火性;发泡原料中的含硫交联剂是其燃烧产烟生成较高浓度SO2的主要原因。     

高浓度酚醛树脂生产废水的预处理

采用二次缩合反应预处理高浓度酚醛树脂生产废水。一次反应的最佳工艺条件为：甲醛加入量0.010 0 mL/mL,Ba（OH）2加入量0.005 g/mL,反应时间3 h,反应温度85 ℃。最佳工艺条件下的一次反应COD去除率为 52.9%。二次反应中,当反应温度为80 ℃、反应时间为3 h、尿素加入量为3 g/L时,二次反应COD去除率最高,为31.5%。COD=85 000 mg/L、ρ（挥发酚）= 12 000 mg/L、ρ（甲醛）=6 740 mg/L的废水经两次缩合反应处理后,出水中COD=27 400 mg/L,COD的总去除率为67.8%;ρ（挥发酚）=2 400 mg/L,挥发酚的总去除率达80.0%;ρ（甲醛）= 980 mg/L,甲醛的总去除率达84.9%。处理1 t废水还可回收酚醛树脂6.75 kg。     

缩聚-Fenton-A/O生物流化床组合工艺处理酚醛废水的工程案例分析

以广州某公司生产酚醛树脂时产生的酚醛废水为研究对象,针对其高浓度、生物毒性强、可生化性差及难降解等特点,设计缩聚-Fenton-A/O生物流化床联合工艺进行处理。此工艺的工程实践中,在总HRT低于75 h的操作条件下,当进水COD、苯酚及甲醛浓度分别为1.0×105～1.2×105 mg/L、2.2×104～2.5×1...     

烷基酚类的生殖干扰毒性与结构相关研究

选用4种烷基酚类化合物,对枝角类生物大型蚤进行24 h急性毒性试验和21 d生殖毒性试验,选取急性试验指标(半数致死浓度)和生殖毒性指标(母蚤存活数、幼蚤生殖量、孵化成活率、幼蚤的雌、雄性个体数等)进行定量构效相关(QSAR)研究.结果表明,所测4种烷基酚化合物均可对大型蚤的生殖特性产生活性影响.其中,4-辛基酚和对壬基酚不但能抑制大型蚤的生殖量,还可改变大型蚤孤雌生殖的幼蚤性别比率.实验化合物的一、二阶分子连接性指数与受试生物体的生殖活性有较好的相关性,且以分子亲核反应为主.