COD浓度和进水流量比对一体化工艺脱氮除碳的影响

保持进水总流量不变,以一定流量比同时从缺氧区和厌氧区进水,探讨了不同进水流量比(R=Q_厌/Q_缺)和进水COD浓度对中心岛式一体化OCO工艺脱氮除碳的影响。研究结果表明,进水COD浓度和进水流量比Rs对COD的去除效果影响不大,出水COD浓度一直稳定在50 mg/L以下,去除率在92%以上;进水COD浓度和进水流量比Rs共同决定着系统TN的去除效果,进水COD浓度为100 mg/L、200 mg/L时,TN去除率随着进水流量比Rs的减小呈增加的趋势;当进水COD浓度为 300 mg/L时,TN去除率随着进水流量比Rs的减小呈先升高后降低的趋势,在进水流量比Rs为3∶1时TN去除率最高,达到87%。     

载硫活性炭微观结构和表面形态研究

为了增强活性炭脱除燃煤电厂烟气中汞的能力,利用汞和硫可以生成稳定的HgS的性质,研究了通过热沉淀增加了活性炭中的硫含量的改性方法,并以SEM、BET、TGA等方法,研究了改性对活性炭表面形貌、硫在活性炭中的分布、活性炭比表面积等性能的影响。结果表明,热沉淀改性方法可以增加活性炭中的硫含量;硫粘附在活性炭的炭链上量较多,孔壁较少;改性工艺降低了活性炭的比表面积,且改性活性炭的比表面积随着温度的升高而增大;载硫后,活性炭中元素硫和炭的结合被增强。     

亚硝酸盐反硝化颗粒污泥的二次启动试验研究

接种0～4℃贮存2个月亚硝酸盐反硝化颗粒污泥,以甲醇为电子供体、亚硝酸盐为电子受体在USB(上流式污泥床)反应器内进行二次启动。结果显示,在逐步提高进水负荷下,约46 d完成了反应器二次启动,污泥床负荷达到3.43 g N/（L·d）,NO₂-N去除率为99%;在稳定运行阶段,当进水NO₂-N浓度为50 mg/L、负荷从1.7 g N/（L·d）逐步提高至5.1 g N/（L·d）时,NO₂-N去除率均大于98%;当表观流速为2.68 m/h、进水负荷逐步提高至8.0 g N/（L·d）时,脱氮率下降至63%,过程中污泥床最大去除速率约为5.7 g N/（L·d）。研究认为,亚硝酸盐颗粒污泥床具有稳定和去除效率高等特点。     

漂浮植物塘协同处理农村分散生活污水研究

通过实验考察了漂浮植物塘对经模拟化粪池简易处理的农村分散生活污水的深度净化效果,结果表明：水葫芦、大薸、聚草塘对上述污水均具有良好的净化效果,水葫芦塘对TP的去除效果最好,大薸塘对TN和NH⁺₄-N的去除效果最好。当水力停留时间为20 d时,3种漂浮植物塘的出水污染物含量可低于GB/T 18921-2002观赏性景观环境用水河道类标准。在南方农村宅沟园河内种植漂浮植物是构建农村实用生活污水收集处理系统、控制农村生活污水对河道污染的一种有效措施。     

单质硫改性介孔炭对水溶液中汞的吸附性能研究

对介孔炭CMK-3进行单质硫改性得到OMC-S,并通过静态吸附实验研究了该材料对水溶液中汞的吸附性能。研究结果表明：单质硫改性可以在介孔炭上负载12.33%的硫,从而使得介孔炭对汞的吸附容量从185 mg/g提高到476 mg/g;OMC-S具有较广的适用pH值范围,在pH 3～11.5范围内其对汞的吸附去除率均达到92%以上;氯离子对OMC-S的吸附性能具有一定的抑制作用,原因在于它能和汞离子络合形成一系列吸附性能较差的Hg-Cl络合物,而腐殖酸在所研究的范围内对OMC-S的吸附性能无明显影响。     

新型人工浮岛流场数值模拟与结构优化分析

近期提出的新型人工浮岛是通过两种不同透水能力基质材料的填充在系统内部形成2个不同水流与溶解氧浓度区域,两区域的过流能力及两者之间水流交换量对系统脱氮除磷效果具有较大的影响。为实现这一新型人工浮岛基质结构设计参数的优化,进一步提高净化能力,应用数值模拟方法对不同结构条件下流场进行了模拟。模拟结果发现,影响两区域水流交换量及其过流能力的主要因素包括：基质材料的填充形状、填充深度及透水能力,其中“钟乳状”形态较“层状”填充形态人工浮岛具有更好的两区域间水流交换能力及过流能力,理论上具有更好的净化效果。根据模拟结果确定的设计参数构建小试试验系统进行对比试验研究,试验结果与数值模拟结论吻合。可见,采用数值模拟方法对人工浮岛内部水流状态进行模拟分析,能够为人工浮岛结构优化设计提供依据。     

改性长石对磷的吸附热力学和动力学研究

在500℃下对甘肃长石进行2 h煅烧,得到改性长石。通过批平衡实验,研究了改性长石对磷的吸附热力学和动力学性能。结果表明：改性长石对磷的吸附等温线符合Freundlich方程,且温度越高,吸附量越大。同时,在60 min内即可对10 mg/L磷溶液达到吸附平衡,改性长石对磷的吸附动力学符合准二级吸附动力学模型,主要是以化学吸附为主。     

Analysis of bacterial community structures in two sewage treatment plants with different sludge properties and treatment performance by nested PCR-DGGE method

The bacterial community structures in two sewage treatment plants with different processes and performance were investigated by denaturing gradient gel electrophoresis （DGGE） of nested polymerase chain reaction （nested PCR） amplified 16S rRNA gene fragments with group-specific primers. Samples of raw sewage and treated effluents were amplified using the whole-cell PCR method, and the activated sludge samples were amplified using the extracted genomic DNA before the PCR products were loaded on the same DGGE gel for bacterial community analysis. Ammonia-oxidizing bacterial and actinomycetic community analysis were also carried out to investigate the relationship between specific population structures and system or sludge performance. The two plants demonstrated a similarity in bacterial community structures of raw sewage and activated sludge, but they had different effluent populations. Many dominant bacterial populations of raw sewage did not appear in the activated sludge samples, suggesting that the dominant bacterial populations in raw sewage might not play an important role during wastewater treatment. Although the two plants had different sludge properties in terms of settleability and foam forming ability, they demonstrated similar actinomycetic community structures. For activated sludge with bad settling performance, the treated water presented a similar DGGE pattern with that of activated sludge, indicating the nonselective washout of bacteria from the system. The plant with better ammonium removal efficiency showed higher ammonia-oxidizing bacteria species richness. Analysis of sequencing results showed that the major populations in raw sewage were uncultured bacterium, while in activated sludge the predominant populations were beta proteobacteria.     

Control factors of partial nitritation for landfill leachate treatment

Anaerobic ammonium oxidation (ANAMMOX) technology has potential technical superiority and economical efficiency for the nitrogen removal from landfill leachate, which contains high-strength ammonium nitrogen (NH4 -N) and refractory organics. To complete the ANAMMOX process, a preceding partial nitritation step to produce the appropriate ratio of nitrite/ammonium is a key stage. The objective of this study was to determine the optimal conditions to acquire constant partial nitritation for landfill leachate treatment, and a bench scale fixed bed bio-film reactor was used in this study to investigate the effects of the running factors on the partial nitritation. The results showed that both the dissolved oxygen (DO) concentration and the ammonium volumetric loading rate (Nv) had effects on the partial nitritation. In the controlling conditions with a temperature of 30±1℃, Nv of 0.2-1.0 kg NH4 -N/(m3d), and DO concentration of 0.8-2.3 mg/L, the steady partial nitritation was achieved as follows: more than 94% partial nitritation efficiency (nitrite as the main product), 60%-74% NH4 -N removal efficiency, and NO2--N/NH4 -N ratio (concentration ratio) of 1.0-1.4 in the effluent. The impact of temperature was related to iVv at certain DO concentration, and the temperature range of 25-30癈 was suitable for treating high strength ammonium leachate. Ammonium-oxidizing bacteria could be acclimated to higher FA (free ammonium) in the range of 122-224 mg/L. According to the denaturing gradient gel electrophoresis analysis result of the bio-film in the reactor, there were 25 kinds of 16S rRNA gene fragments, which indicated that abundant microbial communities existed in the bio-film, although high concentrations of ammonium and FA may inhibit the growth of the nitrite-oxidizing bacteria and other microorganisms in the reactor.     

Effect of Sb dopant amount on the structure and electrocatalytic capability of Ti/Sb-SnO2 electrodes in the oxidation of 4-chlorophenol

Ti/Sb-SnO_2 anodes were prepared by thermal decomposition to examine the influence',of the amount of Sb dopant on the structure and electrocatalytic capability of the electrodes in the oxidation of 4-chlorophenol.The physicochemical properties of the Sb-SnO_2 coating were markedly influenced by different amounts of Sb dopant.The electrodes,which contained 5% Sb dopant in the coating, presented a much more homogenous surface and much smaller mud-cracks,compared with Ti/Sb-SnO_2 electrodes containing 10% or 15% Sb dopant,which exibited larger mud cracks and pores on the surface.However,the main microstructure remained unchanged with the addition of the Sb dopant.No new crystal phase was observed by X-ray diffraction(XRD).The electrochemical oxidation of 4-chlorophenol on the Ti/SnO_2 electrode with 5% Sb dopant was inclined to electrochemical combustion;while for those containing more Sb dopant,intermediate species were accumulated.The electrodes with 5% Sb dopant showed the highest efficiency in the bulk electrolysis of 4-chlorophenol at a current density of 20 mA/cm~2 for 180 min;and the removal rates of 4-chlorophenol and COD were 51.0% and 48.9%,respectively.