气溶胶中有机物的研究进展和前景

首先指出了气溶胶中有机物的研究意义 ,接着介绍了目前对气溶胶中有机物的化学组成、来源和成因、环境和健康效应的认识 ,综述了分析测试方法的研究现状 ,并评述了其研究前景     

Management of hazardous road derived respirable particulates using magnetic properties of tree leaves

The magnetic properties of tree leaves along with their ecological, economical and aesthetic importance can be used to control road derived respirable particulates. Isothermal remanent magnetization (IRM₃₀₀ mT) of three different tree leaves viz. Mango (Mangifera indica), Sisso (Dalbergia sisso) and Banyan (Ficus benghalensis) were determined and IRM₃₀₀ mT normalized for the leaf area. The normalized 2-D magnetization of leaves as shown by results is dominantly controlled by leaf morphology and traffic density. F. benghalensis (Banyan) leaf has highest 2-D magnetization and D. sisso (Sisso) leaf having least 2-D magnetization suggesting greater ability of F. benghalensis (Banyan) tree leaves to reduce magnetic particulates. The particle size of the magnetic grains falls in the category of PM2.5, a particle size hazardous to human health due to its capacity to be inhaled deeply into the lungs.     

Analysis of bacterial community structures in two sewage treatment plants with different sludge properties and treatment performance by nested PCR-DGGE method

The bacterial community structures in two sewage treatment plants with different processes and performance were investigated by denaturing gradient gel electrophoresis （DGGE） of nested polymerase chain reaction （nested PCR） amplified 16S rRNA gene fragments with group-specific primers. Samples of raw sewage and treated effluents were amplified using the whole-cell PCR method, and the activated sludge samples were amplified using the extracted genomic DNA before the PCR products were loaded on the same DGGE gel for bacterial community analysis. Ammonia-oxidizing bacterial and actinomycetic community analysis were also carried out to investigate the relationship between specific population structures and system or sludge performance. The two plants demonstrated a similarity in bacterial community structures of raw sewage and activated sludge, but they had different effluent populations. Many dominant bacterial populations of raw sewage did not appear in the activated sludge samples, suggesting that the dominant bacterial populations in raw sewage might not play an important role during wastewater treatment. Although the two plants had different sludge properties in terms of settleability and foam forming ability, they demonstrated similar actinomycetic community structures. For activated sludge with bad settling performance, the treated water presented a similar DGGE pattern with that of activated sludge, indicating the nonselective washout of bacteria from the system. The plant with better ammonium removal efficiency showed higher ammonia-oxidizing bacteria species richness. Analysis of sequencing results showed that the major populations in raw sewage were uncultured bacterium, while in activated sludge the predominant populations were beta proteobacteria.     

Performance and Environmental Impact of Biodegradable Films in Agriculture: A Field Study on Protected Cultivation

The performance, the degradability in soil and the environmental impact of biodegradable starch-based soil mulching and low tunnel films were assessed by means of field and laboratory tests. The lifetime of the biodegradable mulches was 9 months and of the biodegradable low-tunnel films 6 months. The radiometric properties of the biodegradable films influenced positively the microclimate: air temperature under the biodegradable low tunnel films was 2 °C higher than under the low density polyethylene films, resulting in an up to 20% higher yield of strawberries. At the end of the cultivation period, the biodegradable mulches were broken up and buried in the field soil together with the plant residues. One year after burial, less than 4% of the initial weight of the biodegradable film was found in the soil. According to ecotoxicity tests, the kinetic luminescent bacteria test with Vibrio fischeri and the Enchytraeus albidus ISO/CD 16387 reproduction potential, there was no evidence of ecotoxicity in the soil during the biodegradation process. Furthermore, there was no change in the diversity of ammonia-oxidizing bacteria in the soil determined on the basis of the appearance of amoA gene diversity in denaturing gradient gel electrophoresis.     

Properties of Distillers Grains Composites: A Preliminary Investigation

Interest in renewable biofuel sources has intensified in recent years, leading to greatly increased production of ethanol and its primary coproduct, Distillers Dried Grain with Solubles (DDGS). Consequently, the development of new outlets for DDGS has become crucial to maintaining the economic viability of the industry. In light of these developments, this preliminary study aimed to determine the suitability of DDGS for use as a biofiller in low-cost composites that could be produced by rapid prototyping applications. The effects of DDGS content, particle size, curing temperature, and compression on resulting properties, such as flexural strength, modulus of elasticity, water activity, and color were evaluated for two adhesive bases. The composites formed with phenolic resin glue were found to be greatly superior to glue in terms of mechanical strength and durability: resin-based composites had maximum fiber stresses of 150–380 kPa, while glue composites had values between 6 kPa and 35 kPa; additionally, glue composites experienced relatively rapid microbial growth. In the resin composites, both decreased particle size and increased compression resulted in increased mechanical strength, while a moderate DDGS content was found to increase flexural strength but decrease Young’s modulus. These results indicate that DDGS has the potential to be used in resin glue-based composites to both improve flexural strength and improve potential biodegradability.     

Spray optimization through application and liquid physical property variables–I

One of the most important considerations when optimizing a spray application for maximum efficacy and minimum drift is the selection of the optimum droplet size spectrum (Hewitt, A. J., 1997. The importance of droplet size in agricultural spraying. Atomization and Sprays, 7(3), 235–244). Applicators are faced with an extensive selection of nozzle types, tank mixes and adjuvants. The present paper discusses the way that the tank mix and application variables interact to produce specific spray characteristics of droplet size spectrum, coverage and performance in total spray efficiency. Experimental data investigating the effects of liquid physical properties such as dynamic surface tension, shear and extensional viscosity are described. Spray formation from emulsions, surfactants and oils is also discussed. Atomization studies conducted in wind tunnels using a wide range of atomizer and nozzle types under different operating conditions are discussed. Empirical models for predicting atomization and drift of sprays are described with emphasis on their development and practical use for spray optimization.     

EGSB反应器的启动运行

系统考察接种市政消化污泥EGSB反应器的初次启动和二次启动运行情况,以确定在EGSB反应器内接种市政消化污泥时快速形成高活性、稳定颗粒污泥的可行性和EGSB反应器所形成的颗粒污泥长期放置后能重新用于其他EGSB反应器作种泥并快速启动的可行性.接种市政消化污泥EGSB反应器在中温(35℃左右)条件下能够在46 d内快速启动,所形成的颗粒污泥沉淀性良好,产甲烷活性高,菌群丰富.接种市政消化污泥EGSB反应器初次启动宜采用低进水浓度、高有机负荷的方式.在7～15 ℃的低温下放置一段时间的EGSB反应器的快速二次启动是可行的.仅仅经历了7 d,有机负荷率高达24.84 kg COD/m3·d、COD去除率为94.6%.EGSB反应器二次启动宜采用高启动负荷,快速提高负荷的方式.     

Injection Molded Biocomposites from Soy Protein Based Bioplastic and Short Industrial Hemp Fiber

Biocomposites from soy based bioplastic and chopped industrial hemp fiber were fabricated using twin-screw extrusion and injection molding process. Soy based bioplastics were prepared through cooking with plasticizer and blending with biodegradable poly(ester amide). Mechanical, thermal properties and fracture surface morphology of the “green”/biocomposites were evaluated with universal testing system (UTS), dynamic mechanical analysis (DMA), Environmental Scanning Electron Microscopy (ESEM). It was found that the tensile strength and modulus, flexural strength and modulus, impact strength and heat deflection temperature of industrial hemp fiber reinforced biocomposites significantly improved. The fracture surfaces showed no signs of matrix on the fiber surface suggesting poor interfacial adhesion.     

建筑物走廊型通道中火灾烟气流动特性的研究

应用网络模型方法,将建筑物走廊型通道合理地划分为多个节点,在火源为10kg木材的情况下,利用已开发成功的烟流性状预测软件对四川消防科研所的一座实体建筑物进行了模拟计算,获得了各节点烟流性状的发展变化规律。经比较,模型计算结果与实验数据十分符合。证明走廊型通道的多节点划分方法正确、预测软件实用可靠。根据烟气侵入走道中两节点的时间差及两节点间距,提出了烟气弥漫速度的计算方法。该算法与实测结果间的相对误差小于3%,实例应用及研究的成果,为建筑物火灾时安全疏散动态模拟研究提供了理论依据。     

广东鹤山酸雨地区针叶林与阔叶林降水化学特征

研究并比较了广东酸雨地区鹤山丘陵综合实验站区内不同类型森林降水的化学特征.结果表明,和大气降水相比,针阔叶林林内降水除NO3外其它离子含量都明显增加,马尾松针叶林冠层穿透雨和树干径流中离子含量增加倍数最高分别为34倍和12倍,阔叶林穿透雨和树干径流中离子含量增加倍数最高分别为8倍和10倍,针叶林降水比阔叶林降水离子富集程度较为显著．林内降水中马尾松针叶林树干径流离子总含量小于穿透雨离子总含量,阔叶林穿透雨离子总含量小于树干径流离子总含量.不同阔叶林型林内降水中离子含量是不同的.针叶林林内降水有进一步酸化趋势.林内降水离子富集导致森林冠层正负电荷数不平衡,营养离子大量淋失,使林冠层养分亏损．