Simulation of aerosol direct radiative forcing with RAMS-CMAQ in East Asia

The air quality modeling system RAMS-CMAQ is developed to assess aerosol direct radiative forcing by linking simulated meteorological parameters and aerosol mass concentration with the aerosol optical properties/radiative transfer module in this study. The module is capable of accounting for important factors that affect aerosol optical properties and radiative effect, such as incident wave length, aerosol size distribution, water uptake, and internal mixture. Subsequently, the modeling system is applied to simulate the temporal and spatial variations in mass burden, optical properties, and direct radiative forcing of diverse aerosols, including sulfate, nitrate, ammonium, black carbon, organic carbon, dust, and sea salt over East Asia throughout 2005. Model performance is fully evaluated using various observational data, including satellite monitoring of MODIS and surface measurements of EANET (Acid Deposition Monitoring Network), AERONET (Aerosol Robotic Network), and CSHNET (Chinese Sun Hazemeter Network). The correlation coefficients of the comparisons of daily average mass concentrations of sulfate, PM2.5, and PM10 between simulations and EANET measurements are 0.70, 0.61, and 0.64, respectively. It is also determined that the modeled aerosol optical depth (AOD) is in congruence with the observed results from the AERONET, the CSHNET, and the MODIS. The model results suggest that the high AOD values ranging from 0.8 to 1.2 are mainly distributed over the Sichuan Basin as well as over central and southeastern China, in East Asia. The aerosol direct radiative forcing patterns generally followed the AOD patterns. The strongest forcing effect ranging from −12 to −8 W m⁻² was mainly distributed over the Sichuan Basin and the eastern China’s coastal regions in the all-sky case at TOA, and the forcing effect ranging from −8 to −4 W m⁻² could be found over entire eastern China, Korea, Japan, East China Sea, and the sea areas of Japan     

矿化垃圾基本理化性状剖面变化特征研究

矿化垃圾能否作为农业资源被重新利用,除应考虑有效植物营养物质的含量与是否存在有害物质外,还取决于其基本理化性状。对城市生活垃圾填埋场中经填埋6年、8年、10年后得到的矿化垃圾基本物化性状变化特征进行分析,结果表明:矿化垃圾的土粒密度显著小于对照土壤,交换性盐基总量、CEC显著大于对照土壤,pH值和对照土壤基本相当;表层(0~50 cm)矿化垃圾的土粒密度、CEC、交换性盐基总量、pH值的变化幅度依次大于中层(50~100 cm)和下层(100~150 cm);矿化垃圾的理化性状在填埋8~10年后总体趋于稳定。从植物生长的环境角度看,填埋8~10年后的矿化垃圾可以开采后作为植物生长基质、土壤改良剂等农业资源化利用。     

Sulfonated tea waste: A low-cost adsorbent for purification of biodiesel

In the present work, the crude biodiesel produced from spent fish frying oil through alkaline catalyzed transesterification was purified using a low-cost adsorbent viz. sulfonated tea waste. After separating the glycerol, the crude biodiesel was purified using the suggested adsorbent. Various methods of purification using the said adsorbent were applied such as purification using adsorption column chromatography and shaking methods. The results showed that purification using adsorption column chromatography exhibited the bst result. Properties of the purified fuels were determined and found conformed to those specified by the ASTM standards. For the sake of comparison, purification using zeolite and water washing method was also investigated. The result indicated that the suggested adsorbent was more successful on purification of the crude biodiesel compared to other methods.     

地裂缝活动对Q3残积古土壤物理力学性质的影响

对长安地裂缝金滹陀探槽工点Q3残积古土壤层原状样进行常规土工试验的结果显示:含水率、孔隙比相对裂缝带在其两侧均变小;密度、干密度在其两侧均变大;压缩模量在其两侧无明显变化;液限、塑限在其南侧无明显变化,而在其北侧变大;压缩模量相对裂缝带在次级地裂缝南侧变大,而在次级地裂缝北侧无明显变化;液限、塑限相对裂缝带在次级地裂缝两侧均变小.此试验结果为研究裂缝带的影响宽度提供了依据.     

Assessment of phenylurea herbicides sorption on various Mediterranean soils affected by irrigation with wastewater

The retention values of two herbicides, chlorotoluron and isoproturon, in five Mediterranean soils were assessed by two different approaches, a dynamic method, using a batch technique (BT) and a static method, using a soil saturated paste (SP). The SP method led in all cases to lower herbicide sorption when compared with BT, although pesticide distribution constants from both methods were linearly related for the set of used soils (R² ? 0.99) showing that both methods similarly reflected the behaviour of the different soils. Low-quality water, evaluated by employing recycled urban wastewater, did not modify herbicide sorption when compared with high quality water, in any soil and with any method.     

A/O-MBR中MLSS浓度对污泥性能及膜通量的影响

采用国产聚丙烯中空纤维帘式膜组件,进行了A/O-MBR系统处理生活污水的实验研究,主要探讨了系统中污泥浓度(MLSS)与膜通量变化过程的关系。实验结果表明,MLSS由3 805 mg/L升高到6 912 mg/L时,污泥混合液胞外聚合物(EPS)由43 mg/g VSS增加到81 mg/g VSS,EPS中多糖与蛋白质的比例从0.87增加到1.08。同时,污泥相对疏水性(RH)的降低与Zeta电位的升高也在一定程度上共同促进了膜污染速率的上升。实验条件下,当运行时间为60 d左右,MLSS升高至6 200 mg/L时,跨膜压差上升迅速,膜组件清洗周期由初始的22 d缩短为11 d。A/O-MBR中由于MLSS浓度变化而导致的活性污泥混合液特性的变化,是影响膜通量变化的重要原因。     

生石灰稳定干化对生活污泥理化性质的影响

生活污泥添加其干基质量6%、12%和18%生石灰稳定干化30 d,对不同时期混合物的理化指标进行取样分析。研究结果表明,生石灰稳定干化污泥,污泥的脱水性能得到有效改善,有机质和氮素的损失率分别为14%～29%和23%～26%,磷素含量稳定;微生物检测表明添加18%的生石灰能够有效杀死蛔虫卵。     

高分子材料光老化研究方法综述

高分子材料的光老化试验已日趋成熟,但试验后材料性能的分析方法还在不断完善。将从高分子材料光老化机理、试验方法、试验后宏微观性能分析方法等方面梳理现在的研究进展,并指出进一步的研究方向,为相关从业者提供参考。     

载钴活性焦对As(V)的吸附性能与去除效果

使用沉淀负载法制备了载钴活性焦,并研究了溶液pH值、反应时间、As(V)初始浓度以及共存阴离子等对载钴活性焦吸附去除水环境中As(V)的影响。结果表明,(1)载钴后活性焦的比表面积和孔容积分别提高了20.87%和43.47%;(2)载钴活性焦对As(V)最佳吸附pH值为4.0,当As(V)的初始浓度为10 mg/L时,As(V)去除率可达97%;(3)吸附过程符合准二级动力学模型(k2=0.66,R2=0.96),吸附等温线为Freundlich型(kF=8.227,1/n=0.396,R2=0.97);(4)稳定性实验验证了载钴活性焦的稳定性,钴不易脱附,最大脱附率仅为0.145%。     

纳米SiO2在含阴离子表面活性剂低浊水处理中的应用

在含有阴离子表面活性剂-十二烷基硫酸钠(SDS)的6 NTU高岭土悬浊液中,改变SDS的浓度,投加纳米SiO2与聚合铝PAC进行动态混凝实验与静沉实验,借助图像分析技术与分形理论,探讨了纳米SiO2与PAC处理含SDS低浊水的作用机理、絮凝效果与形态学特征.结果表明:①纳米SiO2与SDS使高岭土粒子表面负电性增强.纳米SiO2的絮凝机理以吸附架桥为主.②纳米SiO2对SDS的去除效果优于PAC.SDS浓度越高,去除效果越显著.但纳米SiO2对无机高岭土粒子的处理能力不如PAC,PAC絮凝后的上清液浊度低.当SDS浓度增至10 mg/L时,纳米SiO2对SDS的去除率高,而PAC对SDS的絮凝能力弱,PAC对无机颗粒的去除效果也下降.③助凝剂纳米SiO2较强的吸附活性能加快PAC絮体成长为结构密实的RLCA构型,分维值高,絮凝效果好.