地下城市综合管廊的抗火构造与消防设计

综合管廊作为现代化城市的基础设施,能够从根本上解决管线埋设或架立引起的挖掘道路、影响交通、破坏景观等问题。提高道路和公用管线的管理水平,有效利用地下空间,提高防灾能力,是现代化都市的必然要求。本文从管廊的构造、抗火设计要求、管线布置、消防系统等方面出发,对地下城市综合管廊的设计提出了一些具体的建议。     

人工快速渗滤系统的运行方式对复氧效果的影响

本文通过在CRI系统现场系统中湿干比,水力负荷周期和增加通气管对复氧效果的研究,发现在湿干比1∶6时,CRI系统对与复氧有关的指标CODCr、NH3-N的去除率较高,系统复氧效果较好;通过缩短系统水力负荷周期,加大系统淹水、落干频率,可以加大系统的复氧量,提高系统的复氧效率,CODCr和NH3-N的去除效果均有所提高;增加通气管对CRI系统复氧效果不明显。     

Effects of copper(II) and copper oxides on THMs formation in copper pipe

Little is known about how the growth of trihalomethanes (THMs) in drinking water is affected in copper pipe. The formation of THMs and chlorine consumption in copper pipe under stagnant flow conditions were investigated. Experiments for the same water held in glass bottles were performed for comparison. Results showed that although THMs levels firstly increased in the presence of chlorine in copper pipe, faster decay of chlorine as compared to the glass bottle affected the rate of THMs formation. The analysis of water phase was supplemented by surface analysis of corrosion scales using X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM) and energy dispersive spectroscopy (EDX). The results showed the scales on the pipe surface mainly consisted of Cu₂O, CuO and Cu(OH)₂ or CuCO₃. Designed experiments confirmed that the fast depletion of chlorine in copper pipe was mainly due to effect of Cu₂O, CuO in corrosion scales on copper pipe. Although copper(II) and copper oxides showed effect on THMs formation, the rapid consumption of chlorine due to copper oxide made THM levels lower than that in glass bottles after 4 h. The transformations of CF, DCBM and CDBM to BF were accelerated in the presence of copper(II), cupric oxide and cuprous oxide. The effect of pH on THMs formation was influenced by effect of pH on corrosion of copper pipe. When pH was below 7, THMs levels in copper pipe was higher as compared to glass bottle, but lower when pH was above 7.     

城市燃气管道泄漏检测方法探讨与评价

介绍了国内外用于燃气管道泄漏检测与定位的主要技术和方法,分析了各种方法的优缺点,对各种方法进行了比较与评价,并对燃气管道泄漏检测与定位方法的发展趋势做了探讨.     

输油管道弯头穿孔泄漏数值模拟

我国在役输油管道经过多年冲刷及腐蚀后,存在安全隐患,使得对输油管道泄漏事故的研究具有重要的现实意义。基于计算流体力学方法,采用有限容积法,建立管道泄漏控制方程,研究不同输送速度及泄漏孔径对泄漏后管内压强分布及泄漏量的影响。结果表明:泄漏孔径一定,输送速度分别与管内压强和泄漏量成正、负相关,泄漏口下游存在局部高压区;输送速度一定,泄漏孔径分别与管内压强和泄漏量成负、正相关,局部高压区的强度降低、范围减小。实际工作中可以采用一定方法增大管内输送速度或增大泄漏口径,从而减少实际的原油泄漏量。     

阻力平衡器在除尘管网中的应用

通过对在除尘系统中作为流体阻尼元件的阻力平衡器和调节阀门的对比分析,阐述了除尘管网中采用阻力平衡器的意义, 并对阻力平衡器的结构、工作原理和设计计算进行了介绍,最后强调了阻力平衡器使用时应注意的事项.     

长输管道数据采集系统的成本优化模型

本文提出了一种面向长输管道数据采集系统的成本优化模型。该模型综合利用无线和有线通信系统,高效利用公网基础设施和专用通信节点,使数据采集系统的成本最小化。本文采用了分而治之的方法,对提出的模型进行了求解,并通过分析模型存在的一些问题,指出了下一步的工作。     

供热管道波纹管补偿器裂纹泄漏的分析及对策

通过对热电厂直埋供热管道波纹管补偿器裂纹泄漏事故的调查分析,找出了问题所在,并提出了解决应力腐蚀问题可行的对策.     

三通管不同开口状态下爆炸气流湍流变化规律

为研究三通管不同开口状态下爆炸参数变化规律,基于数值模拟分析管内爆炸湍流动能大小、形态变化特征.研究结果表明:不同开口状态下三通管道内湍流动能峰值最大值均出现在垂直岔管内,垂直管道开口情况下管道内的最大湍动能峰值增大29.86％,水平管道开口情况下该数值降低10.12％,而两端均开口情况下,增大178.45％;管内与湍...     

管式炉煤气爆燃原因分析

对武钢一管式炉２０００年３月２４日发生煤气爆燃事故进行了分析,结合管式炉周围现场情况,提出了避免此类事故再发生的防范措施。