焦化废水的微生物降解研究进展

焦化废水的成分十分复杂，除含苯系物外，还含有多芳香烃和杂环类有机物，研究表明，选择适合的微生物，并采用相应的生物反应器及处理工艺，可有效地除焦化废水中的COD和其他有毒化合物，文章从降解焦化废水的微生物种类，生物降解原理，降解方法，生物反应器及工艺流程等方面，阐述了焦化废水微生物降解的最新研究进展，指出了焦化废水微生物处理需进一步解决的问题。     

陇西立交枢纽生态绿化工程研究

在陇西立交枢纽的设计和施工工程中，以恢复和优化公路生态环境，提高行车的安全和舒适性为目的，把绿化和植被恢复作为一个重要因子进行全血考虑，使植物材料搭配，经过一年的实践已被见成效。     

Decomposition of CF3CI by corona discharge

In this paper pulsed corona discharge is shown to be effective for the decomposition of CF₃Cl(Freon-13).The pressure of CF₃Cl was 2.67×10³Pa,after discharged for 2 min,39.5% of CF₃Cl was decomposed.The products were mainly CF₄,Cl₂ and CF₂Cl₂.The yield increased by adding O₂ or air.Under the same conditions,more than 94% decomposition yield was obtained if 5.32×10³Pa O₂ or air was added.The composition of products became CF₂O,Cl₂ and CF₄.While the partial pressure of O₂ or air reached 1 arm,the decomposition yield decreased to 54.5% and 48. 5% respectively.     

四方山、达尔滨湖自然保护区植被及植物区系组成

本文论述了四方山、达尔滨湖自然保护区植被生态条件、植被类型、植物类群组成、生活型组成、水分生态类型及区系地理成分等调查成果。     

Catalysts for decomposing ozone tail gas

The preparation of immobilizing-catalysts for decomposing ozone by using dipping method was studied. XRD, XPS and TEM were used to characterize the catalysts. The three kinds of catalysts were selected preferentially, and their catalytic activities were investigated. The results showed that the catalyst with activated carbon dipping acetate( active components are Mn:Cu = 3:2, active component proportion in catalyst is 15%, calcination temperature is 200℃ ) has the best catalytic activity for ozone decomposing. One gram of catalyst can decompose 17.6g ozone at initial ozone concentration of 2.5g/m^3 and the residence time in reactor of 0.1s. The experimental results also indicated that humidity of reaction system had negative effect on catalytic activity.     

小型污水处理工艺及其应用展望

小型沁水处理设施作为投资省见效快的方法对我国今后污水厂建设具有重要指导意义，需要给予更多的关注，文中探讨了小型污水处理工艺的类型及其应用，并对我国小型污水处理厂的建设谈了几点看法。     

Heterojunctioned CuO/Cu2O catalyst for highly efficient ozone removal

In recent years, near surface ozone pollution, has attracted more and more attention, which necessitates the development of high efficient and low cost catalysts. In this work, CuO/Cu₂O heterojunctioned catalyst is fabricated by heating Cu₂O at high temperature, and is adopted as ozone decomposition catalyst. The results show that after Cu₂O is heated at 180°C conversion of ozone increases from 75.2% to 89.3% at mass space velocity 1,920,000 cm³/(g·hr) in dry air with 1000 ppmV ozone, which indicates that this heterojunction catalyst is one of the most efficient catalysts reported at present. Catalysts are characterized by electron paramagnetic resonance spectroscopy and ultraviolet photoelectron spectroscopy, which confirmed that the heterojunction promotes the electron transfer in the catalytic process and creates more defects and oxygen vacancies in the CuO/Cu₂O interfaces. This procedure of manufacturing heterostructures would also be applicable to other metal oxide catalysts, and it is expected to be more widely applied to the synthesis of high-efficiency heterostructured catalysts in the future.     

焦化废水中有害物质的回收及破坏处理

对焦化厂废水的综合治理进行了讨论，介绍了当前几种先进有效的治理技术。生化处理法需对焦化废水中高浓度的酚、氰、氨先回收利用，之后与其它有害物含量较低的废水汇合进行破坏性处理；催化湿式氧化法净化效率高，流程简单；烟道气治理焦化废水可实现以废治废的目的。     

Detection of Escherichia coli in wastewater based on enzyme immunoassay

This research describes a fast detection method on the basis of enzyme-linked immunosorbent assay (ELISA) for Escherichia coli in drainage of wastewater treatment plants. Optimized conditions such as the reaction format (sandwich or direct), the concentrations of diluted horseradish peroxidase (HRP)-E. coli conjugate, and anti-HPR antibody and pretreatment of E. coli were studied. Those results showed that the linear range of detection for E. coli was 10 cfu/mL-6 × 10⁴ cfu/mL. Compared with conventional methods, it is a convenient and sensitive detection method with low cost. Translated from Environmental Science, 2005, 26(5): 128–131 [译自: 环境科学]     

计算机辅助安全性评价系统

针对安全性评价过程评价周期长，工作量大，手段落后等问题，依据安全检查表法及评价理论，以Microsoft Visual Basic6.0为开发工具，开发了火力发电厂安全性评价计算机辅助系统，在企业局域网中实现，可以减少安全评价过程中大量重复工作，提高效率，其它行业也可以基于此方法，开发相应的计算机辅助评价系统。