不同絮凝剂对活性污泥特性及除污效能的影响研究

为了研究絮凝剂对污泥特性及除污效能的作用结果,考察了SBR反应器中投加聚合氯化铝(PAC)、聚合硫酸铁(PFS)和阳离子聚丙烯酰胺(CPAM)对污泥特性及COD、NH_4~+-N和TP去除效果的影响。结果表明:投加10 mg/L PAC会导致活性污泥沉降性能变差,降低了微生物对污染物质的分解能力;投加0.1 mg/L CPAM和10 mg/L PFS能够改善活性污泥菌胶团和絮体结构,使得活性污泥的吸附效能和沉降性增强。     

循环载荷下煤样渗透特性试验研究

以原煤煤样为研究对象,采用自主研发的三轴应力渗流实验系统,进行等幅循环加、卸载的渗透率测试,研究煤样疲劳损伤过程中渗透率对应力水平的响应特征。结果表明:上、下限应力点处渗透率随循环次数出现降低-稳定-升高3个阶段,整体呈“U”型,并且随着上限应力水平的升高,曲线有向“V”型发展的趋势。拟合结果显示:在渗透率降低阶段,渗透率与循环次数呈幂指数函数关系;在渗透率升高阶段,渗透率与循环次数呈指数函数关系,并且渗透率随循环次数的降低和升高速率与上限应力水平正相关。     

山丘地形下近浅埋煤层综采面静动载叠加的矿压显现特征研究

针对近浅埋综采面过山丘地形发生强矿压显现的问题,采用现场监测、理论分析与数值模拟相结合的方法,建立山丘静载应力传递模型和不同岩层赋存特征的沙土型与土石型山丘工作面关键块体结构力学模型,分析山丘地形工作面矿压发生机理。研究表明:山丘静载向工作面传递的垂直应力呈钟形分布,山丘高静载应力易激发弱铰接结构失稳;山丘坡体中关键层的有无导致了土石型和沙土型山丘工作面矿压发生机理的差异性;坡体断裂块的倾斜回转运动是沙土型山丘工作面发生强矿压的主导因素,断裂块不同的倾斜回转方向导致工作面在上坡段矿压显现缓和而下坡段显现剧烈;土石型山丘工作面的矿压显现主要受坡体中关键块体结构稳定状态的控制,工作面在上坡初和坡顶段动载矿压强烈而下坡段后期较缓和。数值计算结果与现场监测和理论分析相符。     

实施污染物总量控制中的环境监测

随着经济的发展,由发展带来的污染问题也愈发的严重,如何治理和监测环境问题显得十分重要。文章旨在研究环境监测在对污染物总量控制上的作用做出分析,指出目前环境监测上存在的不足,提出建议和解决方案,更好的发挥环境监测的作用。     

生物炭输入对土壤污染物迁移行为的影响

重点综述了生物炭输入对土壤中污染物的吸附固持作用及生物有效性的影响,分析其作为土壤添加剂消减土壤污染风险的有效性,为生物炭在土壤中的应用研究提供依据。     

Interaction mechanisms of organic contaminants with burned straw ash charcoal

Black carbons(e.g.,charcoal) have a great impact on the transport of organic contaminants in soil and water because of its strong affnity and ubiquity in the environment.To further elucidate their interaction mechanism,sorption of polar(p-nitrotoluene,m-dinitrobenzene and nitrobenzene) and nonpolar(naphthalene) aromatic contaminants to burned straw ash charcoal under different de-ashed treatments were investigated.The sorption isotherms fitted well with Freundlich equation,and the Freundlich N values were all around 0.31-0.38,being independent of the sorbate properties and sorbent types.After sequential removal of ashes by acid treatments(HCl and HCl-HF) ,both adsorption and partition were enhanced due to the enrichment of charcoal component.The separated contribution of adsorption and partition to total sorption were quantified.The effective carbon content in ash charcoal functioned as adsorption sites,partition phases,and hybrid regions with adsorption and partition were conceptualized and calculated.The hybrid regions increased obviously after de-ashed treatment.The linear relationships of Freundlich N values with the charring-temperature of charcoal or biochar(the charred byproduct in biomass pyrolysis) were observed based on the current study and the cited publications which included 15 different temperatures(100-850°C) ,10 kinds of precursors of charcoal/biochar,and 10 organic sorbates.     

Ecotoxicological effects of polycyclic musks and cadmium on seed germination and seedling growth of wheat (Triticum aestivum)

Single and joint toxic e ects of polycyclic musks including 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclopenta[g]-2- benzopyran (HHCB) and 7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4-tetrahydronapthalene (AHTN) and cadmium (Cd) on seed germination and seedling growth of wheat (Triticum aestivum) were investigated. The results showed that the toxicity sequence of HHCB toxic to wheat seed germination and seedling growth was similar to that of AHTN, that is, germination rate > shoot elongation > root elongation, while the toxicity of Cd was in the sequence of root elongation > shoot elongation > germination rate, according to the LC50 and EC50 values. It is suggested that polycyclic musks and Cd had di erent toxicological mechanisms. Root and shoot elongation of wheat might be good bioindicators for the contamination of polycyclic musks and Cd in soil. The mixture of polycyclic musks and Cd had synergistic e ects on T. aestivum according to the equi-toxic mixture approach when root elongation was selected as the toxicological endpoint. Thus, the joint toxicity of HHCB and Cd was significantly higher than the single toxicity of HHCB or Cd, which was also confirmed by the EC50 mix value of the mixture (EC50 mix = 0.530 TUmix). The EC50 mix value of the mixture of AHTN and Cd was 0.614 TUmix, which indicated that the mixture toxicity was strengthened when AHTN coexisted with Cd.     

加载嵌合技术在炼油废水处理中的应用

叙述了加载嵌合工艺的特点,将其应用于齐鲁石化胜利炼油厂含盐污水处理系统中,试验表明:在传统的絮凝沉降工艺中引入的加载物磁粉,强化了絮凝、沉降效果,对胶体、悬浮物、大分子有机物和微生物残体等有很好的处理效果;且加载嵌合装置所产生的污泥全部经由叠螺式污泥脱水机脱水处理,不产生二次污染。     

天津地区典型家用生物质颗粒采暖炉污染物排放分析

为调查研究天津市家用生物质颗粒采暖炉的污染物排放性状,同时为政府的政策制定提供技术依据,研究了天津地区生物质燃料成分和采暖炉不同运行负荷对污染物排放的影响.结果表明：稻杆和棉杆两种成型燃料在同一采暖炉的相同工况下燃烧时,稻杆灰分含量较棉杆高,造成较高的烟尘和CO排放,同时稻杆较棉杆S元素含量低,导致SO₂排放较低.棉杆成型燃料在同一容量的采暖炉上燃烧时,随着燃烧器负荷的增加,CO和SO₂的排放增加,NO_x的排放减少.两种生物质成型燃料在该采暖炉上燃烧排放的挥发性有机物的主要种类均依次为酮类、苯系物、醛类.本工作试验用家用生物质颗粒采暖炉运行过程中NO_x、CO、SO₂、烟尘的平均排放值分别为672.70,2297.94,124.00,109.35mg/m³,存在污染物排放超标的现象,可通过增添水浴除尘设施,合理调节不同燃烧负荷下的风机送风量,维持适宜过量空气系数,以降低污染物排放.同时还需制定合理的标准和政策加强对家用采暖炉和成型燃料质量的监管.     

Ag/Cu3(BTC)2复合催化剂的制备及其NH3-SCR催化性能

采用紫外还原的方法成功制备出Cu₃（BTC）₂（均苯三甲酸合铜）负载贵金属Ag纳米颗粒的Ag/Cu₃（BTC）₂复合催化剂,并用于氨法脱硝反应.应用X射线衍射（XRD）、透射电子显微镜（TEM）、BET测试等手段对催化剂的物理化学性能进行了表征.结果发现Ag纳米颗粒以球状结构高度均匀分散在Cu₃（BTC）₂骨架结构的表面.负载Ag纳米颗粒和Cu-MOF的协同作用,提高了Ag/Cu₃（BTC）₂催化剂的脱硝效率,负载量为15wt%的催化剂表现出最优脱硝效率,在220～260℃达到100%的NO转化率.同时,利用in-situ FTIR技术对NH₃-SCR的反应机理进行了探究.