新型聚硅氯化铁铝絮凝剂的制备及性能

以二甲基二氯硅烷为硅源,与氯化铁、氯化铝聚合制得新型的聚硅氯化铁铝（PSFAC）絮凝剂,考察了制备条件及PSFAC对含油废水和药厂废水的絮凝效果。制备PSFAC的最佳条件：nFc：nAl为0．4,nSi：n（Al＋Fe）为0．1,碱化度为2．0,C（Al,Fe）、为0．1mol／L,熟化时间为1-2d。当PSFAC加入量为10mg／L时,对含油废水、药厂废水的浊度去除率分别为84％和86％。PSFAC具有加入量少、沉降速度快、适用的pH范围较宽等优点。     

含有机物铁泥的超临界水氧化法资源化

氨基染料生产过程中产生大量含有机物的铁泥,对环境造成严重污染并造成资源的极大浪费.利用超临界水氧化法对含有机物铁泥进行资源化处理研究,并对产物进行了X射线衍射分析(XRD)、色差实验与电子探针分析.研究结果显示,用超临界水氧化法处理铁泥可以将铁泥中所含的有机物完全氧化,真正实现环境友好;超临界水首先将铁泥氧化成α-Fe2O3与γ-Fe2O3,再经过800℃煅烧后可以作为氧化铁红颜料使用;超临界反应压力对样品的晶型与颜色影响不大.     

流动注射分光光度法测定水中铝的含量

以桑色素作显色剂,采用流动注射分光光度法测定水中铝的含量。在桑色素质量浓度为0．8g／L、聚氧乙烯辛基苯基醚体积分数为1．0％、进样环体积为400μL、检测波长420nm的条件下,采用流动注射分光光度法对水中铝的含量进行测定,本方法的线性范围为2～300μg／L,检出限（信噪比为3）为0．124μg／L,相对标准偏差为2．9％,加标回收率为96．4％～101．8％。     

铝氧化物-水界面化学及其在水处理中的应用

天然水体中,铝氧化物矿物表面上的吸附等各种反应在很大程度上影响着金属阳离子、无机阴离子和一些天然有机物的迁移转化和归趋.在水处理等工业领域中,铝氧化物由于其水合表面的吸附能力而被用做离子交换剂和催化剂载体.因此,对铝氧化物表面化学过程的研究具有重要意义.铝氧化物-水界面上的反应十分复杂,对各种无机、有机污染物的吸附结合能力取决于氧化物固相表面性质、溶液条件和吸附质的性质.从对铝氧化物表面荷电特性和吸附活性的认识出发,就各种铝氧化物的结构特征和表面反应活性及其在水处理技术中的应用进行了简要综述.     

Fe(Ⅱ)/K2S2O8对水体中As(Ⅲ)的氧化研究

研究了Fe(Ⅱ)/K2S2O8对水体中As(Ⅲ)的氧化作用,以及pH值、Fe(Ⅱ)初始浓度等因素对氧化As(Ⅲ)的影响,并且采用分子探针法的竞争性实验鉴定了体系中产生的活性中间体,探讨了K2S2O8在Fe(Ⅱ)存在的条件下对As(Ⅲ)的氧化机理。     

Effect of sulfate on the methanogenic activity of a bacterial culture from a brewery wastewater during glucose degradation

The maximum specific methanogenic activity （SMA） of a sludge originating from a brewery wastewater treatment plant on the degradation of glucose was investigated at various levels of sulfate on a specific loading basis. Batch experiments were conducted in serum bottles at pH 7 and 35℃. A comparison of the values indicates that the SMA of this mixed culture was increased and reached its highest level of 0.128 g CH4 gas COD/（g VSS.d） when biomass was in contact with sulfate at a ratio of 1：0.114 by weight.     

Removal of arsenic from wastewater using iron compound: Comparing two different types of adsorbents in the context of LCA

A study was carried out in order to compare the environmental performance of two different types of adsorbents in removing arsenic (As) from wastewater. A FeCl₃-based adsorbent and a poly-Fe-based adsorbent were first synthesized and their abilities in adsorbing As from wastewater were investigated in terms of the adsorption density and the rate of adsorption. Here, it should be noted that the main material being used in the synthesis of the poly-Fe-based adsorbent was a waste product, known as polyferric sulfate or poly-Fe in short, which exits the manufacturing process of titanium dioxide.Both adsorbents were then compared in the context of life-cycle assessment (LCA). In other words, the experimental results (i.e. the value of the adsorption density and the rate of adsorption) were input into the LCA model in order to assess the environmental performance of each adsorbent in removing arsenic. An estimate for the environmental burden of each option was finally calculated as the sum of the depletion of abiotic resources (ADP), the global warming potential (GWP), the acidification potential (AP), the photo-oxidant formation potential (POCP), the eutrophication potential (EP), and the human toxicity potential (HTP). The main finding of this study was that the adsorption of arsenic by using the poly-Fe-based adsorbent is more attractive treatment option in the environmental protection point of view than the adsorption by using the FeCl₃-based adsorbent, which generates a relatively larger environmental burden.     

聚合氯化铝铁去除微污染水体中藻类的研究

以聚合氯化铝铁(PAFC)为絮凝剂,H2O2为预氧化剂,用正交实验研究了PAFC处理微污染水体中藻类和降低浊度,得出正交实验中各因素的主次关系及对除藻和除浊度的影响,研究表明,ρPAFC是影响除藻和除浊度的重要因素.在最佳处理条件,即ρPAFC为20 mg/L,ρH2O2为6 mg/L,pH为7,搅拌时间为4 min,能使水体中藻细胞街度从9.4×107 cells/L降至3.16×106 cells/L,除藻率为96.6%,浊度降至0.70 NTU,除浊度率达93.0%.     

壳聚糖衍生物-镁盐复配去除中性兰模拟废水色度的研究

研究了有机高分子絮凝剂NCTS-M对中性兰染料的絮凝性能。通过测量絮体的Zeta电位以及对絮体进行彩色电视显微扫描初步探讨了该絮凝过程的絮凝机理。结果表明,当投加量为30 mg/L,pH=6时,絮凝效果最明显,脱色率可达93.1%。其絮凝机理主要是压缩双电层以及高分子吸附架桥作用,以压缩双电层为基础。絮凝剂中镁离子在中性条件下对絮凝过程也起到了较强的助凝作用。     

聚硅酸锌铝的制备及其性能研究

以硅酸钠、硫酸锌、硫酸铝为原料,通过共聚法制备了无机高分子絮凝剂聚硅酸锌铝（PSZAS）,研究了Na₂SiO₃的摩尔浓度、活化时间、Al/Si、Zn/Si 配比及絮凝剂的投加量对絮凝效果的影响,用X-射线衍射（XRD）和电子扫描电镜（SEM）对该絮凝剂的结构及形貌进行了表征。结果表明：当硅酸钠的浓度为0.4 mol/L,硅酸活化时间为2 h,Si∶Al∶Zn=1∶1∶1.5,絮凝剂投加量为20 mL/L废水时,絮凝剂的电中和能力和吸附架桥能力最强,絮凝剂对含H-酸染料模拟废水的絮凝效果最好。