BEL型双维振打式电除尘器的研发

文章介绍了一种顶打和侧打相结合的BEL型双维振打式电除尘器，该产品将电除尘器两种主要的振打清灰技术结合，适用于老除尘器的提效改造及新除尘器的制造等。     

CALCULATION OF CUMULATIVE PERCENTAGE AT SELECTED PARTICLE SIZES FROM BOTTOM WITHDRAWAL TUBE ANALYSIS

ABSTRACT: A new computation method is developed for the bottom withdrawal tube particle size analysis. A transformation on time scale is introduced so that the cumulative percentage of a selected particle size can be determined from a single continuous Oden cum.     

热水锅炉水冷壁管爆管事故综合分析

对在同一单位的三台热水锅炉发生多起水冷壁管爆管事故进行了综合分析,提出了相应的改进措施。     

L型钢管混凝土芯柱耐火极限研究

火灾高温对结构安全有显著影响,为研究等肢L形钢管混凝土芯柱的耐火极限及其影响因素,利用ABAQUS软件建立合理的高温反应分析模型,在验证模型可靠性基础上,分析了荷载比、截面边长、长细比、荷载偏心率、含钢率等对L形钢管混凝土芯柱耐火极限的影响。研究结果表明:在一定参数范围内,荷载比和截面边长是构件耐火极限的主要影响参数,荷载比越小,截面边长越大,构件的耐火极限越高;长细比和荷载偏心率对其影响较大,长细比和荷载偏心率越小,构件的耐火极限越高;含钢率对其影响不显著。结果可为异形钢管混凝土芯柱的抗火安全设计提供参考。     

Application of CFD on the sensitivity analyses of some parameters of the modified Hartmann tube

The aim of this work is to determine the influence of operating parameters such as the dispersion pressure, the ignition delay and height on the dust flammability. A Computational Fluid Dynamics (CFD) simulation, based on an Euler–Lagrange approach, was developed with Ansys Fluent™ and validated experimentally. Such analysis will facilitate the choice of the most conservative conditions for a flammability test. This paper is focused on a case study performed on wheat starch with the modified Hartmann tube. The dispersion process of the powder was studied with granulometric analyses performed in situ and high speed videos. Tests were performed with injections at gas pressure ranging from 3 to 6 bars and the evolution of the particle size distribution (PSD) was recorded at different ignition heights (5, 10 and 15 cm over the dispersion nozzle). The observations highlighted the presence of agglomeration/deagglomeration processes and dust segregation. Besides, a CFD simulation analysis was aimed at evaluating the impact of a set of parameters on the PSD and the local turbulence, which are closely linked to some flammability parameters. For this computational analysis, the CFD simulation was coupled with a collision treatment based on a Discrete Element Method (DEM) in order to consider the cohesive behavior of the combustible dust. Thus the results suggest performing the injection of the gases at approximately 5 bars for the flammability tests of wheat starch in order to obtain the finest PSD at a given ignition height. It is also shown that the finest PSD are obtained at 5 cm over the dispersion nozzle. However, the local instabilities and turbulence levels are so high during the first stages of the dispersion that the flame growth can be disturbed for short ignition delays. Moreover, the stabilization of the bulk of the dust cloud requires longer periods of time when the ignition sources are located at 15 cm. As a result, the recommended height to perform a flammability test is 10 cm in this case. Finally, this study proposes some tools that might improve the procedure of dust flammability testing.     

Novel eco-friendly spherical porous adsorbent fabricated from Pickering middle internal phase emulsions for removal of Pb(II) and Cd (II)

Spherical porous materials prepared from the emulsion template used in the water treat-ment have displayed a vast prospect,as the high surface area,abundant porous structure,convenient operation and excellent adsorption performance.But the tedious fabrication process,high consumption of organic solvent and surfactant limited the application widely.Herein,a facile and eco-friendly spherical porous adsorbent (SPA) is fabricated from the green surfactant-free (corn oil)-in-water Pickering medium internal phase emulsions (Pick-ering MIPEs) via the convenient ion crosslinking procedure.The Pickering MIPEs synergis-tically stabilized with the semi-coke (SC),which is the natural particle produced from the shale oil distillation,and sodium alginate (SA) has excellent storage and anti-coalescence stability.The as-prepared porous adsorbent possessed the abundant pore structure,which provided favorable conditions for effective mass transfer in adsorption,and could be tuned by varying the SA dosage.The saturation adsorption capacities of Pb(Ⅱ) and Cd(Ⅱ) can be achieved with 460.54 and 278.77 mg/g within 45 min at 25℃,respectively.Overall,this study supplied a viable and eco-friendly route for fabricating the spherical porous adsorbent with a tunable porous structure for heavy metal ion wastewater.     

土壤有机质含量测定方法的改进研究

通过研究改进了土壤有机质含量的测定方法。首先称取适量土壤置于长管消解系统中进行消解,然后采用全自动电位滴定仪进行滴定,直接获得土壤的有机质含量。使用该方法测定的土壤标准样品的有机质含量均在保证值以内,同时对实际样品进行精密度测试,得到相对标准偏差为1．03％。该方法降低了土壤有机质含量检测的实验成本,减少了环境污染,同时提高了实验数据的准确度与精密度,值得推广。     

Chloride Released from Three Permeable Pavement Surfaces after Winter Salt Application

Few studies exist on how chloride from chloride‐based deicers is transported in infiltration‐based stormwater control measures. In 2009, the U.S. Environmental Protection Agency (USEPA) constructed a 0.4 ha parking lot in Edison, New Jersey, that was surfaced with permeable interlocking concrete pavers (PICP), pervious concrete (PC), and porous asphalt (PA). Each surface type has four equally sized, lined sections that direct all infiltrate to separate 5.7 m³ collection tanks. The USEPA acute criterion for aquatic life (860 mg/l) was exceeded in events immediately following a snow event. Concentrations of the infiltrate exceeded the detection limit (5 mg/l) year round but did not exceed the USEPA chronic toxicity (230 mg/l) after April. The chloride concentration decreased with cumulative rainfall since previous snow event, and a power regression described this relationship. In the power regression, the coefficient (b) described the initial concentration following a snow event, and the exponent (m) described the rate in which chloride was flushed through the system with infiltrating water. PC had the largest coefficient (5,664) and largest absolute exponent (?0.92), followed closely by PICP (b = 4,943 and m = ?0.87), and distantly by PA (b = 2,907 and m = ?0.67). The differences in release rate were proportional to the measured surface infiltration rates of 4,000; 2,400; and 200 cm/h for PC, PICP, and PA, respectively. These results will assist those who manage or regulate stormwater where receiving waters are chloride impaired.     

广州市内环路项目环境策略研究

广州市内环路工程是广州市中心区内在建的一条连续性的高等级环市道路 ,全长 2 6 7公里 ,其主要功能是为了缓解市内交通问题。文中分析了内环路工程产生的主要环境问题 ,从系统工程角度探讨和提出了环境保护的对策措施。     

Prenatal diagnosis in three cases of iniencephaly with unusual postmortem findings

Iniencephaly is a rare and lethal congenital malformation of the neural tube characterized by occipital bone defect, cervical dysraphism, fixed retroflexion of the fetal head and severe lordosis of the cervicothoracic spine. The etiology is unknown. Prenatally diagnosed cases of iniencephaly are rare because careful and early ultrasonographic evaluation is necessary. We present three cases of iniencephaly prenatally diagnosed by sonography at 20–22 weeks' gestation in which therapeutic abortion was induced. The sonographic findings were compatible with the postmortem findings. The present cases of iniencephaly were found to carry unusual associated malformations such as two lobes in the right lung and chorangiosis of the placenta. Only hypoplastic lungs have been reported by previous authors. We also studied the 677C→T mutation on the methylenetetrahydrofolate reductase gene in the parents in one of the present cases. The mother was found to be heterozygous for the 677CT polymorphism. Copyright © 2001 John Wiley & Sons, Ltd.