TiO2/pg-C3N4复合催化剂的制备及光催化性能

通过简单的超声剥离分散和水热法,成功制得了具有多孔结构的TiO₂/pg-C₃N₄复合催化剂.利用XRD、SEM、TEM、UV-Vis DRS和PL对样品的形貌、结构及光学性能进行了表征.在模拟太阳光照射下,以RhB和MO为模拟污染物考察了TiO₂/pg-C₃N₄的光催化性能.结果表明：当TiO₂占pg-C₃N₄的质量分数为5%时,制得的TiO₂/pg-C₃N₄（5：100）复合催化剂具有最优的光催化性能.TiO₂/pg-C₃N₄（5：100）对RhB的光催化降解途径为O^2·-和h⁺使整个共轭发色团结构发生裂解.TiO₂/pg-C₃N₄（5：100）光催化性能的提高一方面是由于多孔结构增加了光催化反应的活性位点;另一方面是由于TiO₂与pg-C₃N₄之间形成了Z型异质结,与传统的Ⅱ型异质结相比,该复合催化剂不仅使光生载流子分离效率提高,同时保留了pg-C₃N₄导带电子的强还原性和TiO₂价带空穴的强氧化性.     

油田用钨合金镀层腐蚀性能评价研究

目的评价钨合金镀层油管的腐蚀性能。方法利用高压釜模拟高压气井和高含硫气井的腐蚀环境,进行高压高温腐蚀试验,以及标准的氢致开裂(HIC)和硫化氢应力腐蚀试验。采用电子扫描显微镜(SEM)及其能谱仪(EDS)和X射线衍射分析仪(XRD),分析或检测钨合金镀层和基管的腐蚀形貌、腐蚀产物的组成。结果油管表面的钨合金镀层平整而致密,其主要组成元素为W和Ni。高温高压腐蚀试验后,镀层仍然致密平整,腐蚀程度轻微。在60、90、120、140℃试验7天时,镀层和基材的H_2S/CO_2腐蚀速率分别为0.0179、0.0093、0.0102、0.0369 mm/a和1.030、1.272、1.183、0.991 mm/a。试验30天,在120℃时,其H_2S/CO_2腐蚀速率分别为-0.0085、0.1789 mm/a;在160℃时,其CO_2腐蚀速率分别为0.0091、0.8976 mm/a。该钨合金镀层均通过了标准的氢致开裂和硫化氢应力腐蚀试验。结论该钨合金镀层具有很好的耐腐蚀性能。     

加热炉炉管穿孔事故处理及原因分析

以一起直接式原油加热炉炉管穿孔事故为例,介绍了事故处理程序,分析了炉管穿孔的原因是由于漏点腐蚀、坑点腐蚀以及炉管管卡损坏导致的,并提出了类似事故防范对策.     

A stochastic-advective transport model for NAPL dissolution and degradation in non-uniform flows in porous media

Remediation schemes for contaminated sites are often evaluated to assess their potential for source zone reduction of mass, or treatment of the contaminant between the source and a control plane (CP) to achieve regulatory limits. In this study, we utilize a stochastic stream tube model to explain the behavior of breakthrough curves (BTCs) across a CP. At the local scale, mass dissolution at the source is combined with an advection model with first-order decay for the dissolved plume. Field-scale averaging is then employed to account for spatial variation in mass within the source zone, and variation in the velocity field. Under the assumption of instantaneous mass transfer from the source to the moving liquid, semi-analytical expressions for the BTC and temporal moments are developed, followed by derivation of expressions for effective velocity, dispersion, and degradation coefficients using the method of moments. It is found that degradation strongly influences the behavior of moments and the effective parameters. While increased heterogeneity in the velocity field results in increased dispersion, degradation causes the center of mass of the plume to shift to earlier times, and reduces the dispersion of the BTC by lowering the concentrations in the tail. Modified definitions of effective parameters are presented for degrading solutes to account for the normalization constant (zeroth moment) that keeps changing with time or distance to the CP. It is shown that anomalous dispersion can result for high degradation rates combined with wide variation in velocity fluctuations. Implications of model results on estimating cleanup times and fulfillment of regulatory limits are discussed. Relating mass removal at the source to flux reductions past a control plane is confounded by many factors. Increased heterogeneity in velocity fields causes mass fluxes past a control plane to persist, however, aggressive remediation between the source and CP can reduce these fluxes.     

恶臭假单胞菌Pseudomonas putida 5-x细胞壁膜系统的Cu2+吸附性能

对1株从电镀废水中分离出的革兰氏阴性菌恶臭假单胞菌P.putida 5-x的细胞表面组分对Cu²⁺的吸附性能进行了分析研究.结果表明,分离的P.putida 5-x细胞壁膜的Cu²⁺吸附容量是完整细胞的5倍之多.细胞表面组分如肽聚糖层、细胞外膜和细胞内膜在P.putida 5-x细胞壁膜的Cu²⁺吸附过程中都发挥了作用.肽聚糖层、细胞外膜和内膜在P.putida 5-x细胞壁膜中的含量依次为细胞内膜>外膜>肽聚糖层,而它们的Cu²⁺吸附容量的大小依次为肽聚糖层>外膜>内膜.在P.putida 5-x细胞壁膜对Cu²⁺的吸附过程中,肽聚糖层贡献了不到15%的吸附容量,而细胞外膜和内膜分别贡献了30%～35%和25%～30%.P.putida 5-x细胞外膜中的磷脂含量明显比其它报道的革兰氏阴性细菌的细胞外膜高,这可能是P.putida 5-x细胞外膜具有较高Cu²⁺吸附容量的主要原因,并由此导致P.putida 5-x细胞壁膜的高Cu2+吸附容量.     

CH_4/N_2/O_2预混气激波火焰结构数值预测

研究激波着火现象，推导激波加热点燃可燃气控制方程组。针对甲烷预混气激波火焰结构进行数值模拟，计算了激波燃烧时的压力、温度、及不同组分随时间的变化历程。其中甲烷燃烧采用美国BERKELEY大学GRI-MECH机理，该反应机理包含177个基元反应，涉及32种组分。程序采用美国SANDIA国家实验室发展的大型化学反应动力学软件包CHEMKIN III中相关的模型、子程序和热力学数据库。计算结果表明激波火焰有其自身的结构特征。