GP/APP膨胀阻燃体系对硅橡胶复合材料阻燃及抑烟性能的影响

为了探究石墨粉 (GP) 与聚磷酸铵 (APP) 膨胀阻燃体系对硅橡胶复合材料的阻燃及抑烟特性的影响,采用锥形量热仪 (CCT)、热重分析仪 (TG) 及极限氧指数测试仪 (LOI) 对阻燃硅橡胶复合材料进行表征。研究结果表明:与单独添加膨胀阻燃剂APP的阻燃硅橡胶相比,添加GP/APP膨胀阻燃体系可有效提升燃烧过程中形成的膨胀碳层的致密度,降低阻燃硅橡胶复合材料的热释放速率及总烟释放量,提高阻燃硅橡胶复合材料高温阶段的热稳定性,提升阻燃硅橡胶复合材料的燃烧成炭率和质量保持率; 使阻燃硅橡胶复合材料的氧指数值增大。     

由硫酸亚铁(绿矾)制取还原铁粉的工艺研究

提出了一种新的绿矾综合利用的途径,即绿矾经碳酸盐转化,然后采用无烟煤作还原剂,CaCO3为添加剂,进行高温还原焙烧制取还原铁粉.先将绿矾用水溶解,用理论量1.2倍的(NH4)2CO3将FeSO4转化为FeCO3,FeCO3焙烧的最佳条件是FeCO3∶无烟煤∶CaCO3为100∶60∶8,焙烧温度为1000℃,焙烧时间为4.5 h.粗还原铁粉化学成分除C含量较高外,符合国家有关标准,900℃左右经氢气精还原1 h所得精还原铁粉化学成分的各项指标,均达到或优于国家有关标准的要求.     

Zeolite powder addition to improve the performance of submerged gravitation-filtration membrane bioreactor

In this study, the effect of zeolite powder addition on submerged membrane bioreactor （SMBR） on membrane permeability, and the removals for COD, NH3-N, TN were investigated. Through the parallel operation of control and test systems, it was found that the zeolite powder addition could alleviate the ultra-filtration membrane fouling and enhance the membrane permeability. On the basis of experimental investigations, a concept of ＂protection coating layer＂ was proposed to illustrate the phenomenon of UF membrane fouling. In addition, the removal for COD in test system was more stable, a little higher compared to the control system. Due to the combination of nitrification and ion exchange, a more excellent removal for NH3-N in test system was obtained regardless of influent NH3-N loading rate. It was also found that a mean 25% higher TN removal took place in the test system, and ion exchange and simultaneous nitrification and de-nitrification were analyzed to be main factors. During the stable operation period, the SOURs of test zeolite powder added sludge and control activated sludge were measured to be 75 mgO2/（gMLVSS, h） and 24 mgO2/（gMLVSS, h） respectively, it meant that the zeolite powder addition could enhance the microorganism activity significantly.     

粉末冶金方法在块状雄黄制备过程As2O3气体污染防治中的应用

针对现有块状雄黄火法制备工艺As2 O3气体污染严重的情况 ,提出了利用粉末冶金方法热压工艺制备块状雄黄的“浮选 化学除杂 热压制块”新工艺流程。并对热压制块工艺进行了试验研究。试验结果表明 ,在较佳工艺条件下可以制备出符合药用要求的较致密的块状雄黄 ,且该工艺不会造成As2 O3气体污染。     

废铝易拉罐粉末对U(Ⅵ)的去除效果与机理

以废铝易拉罐为原料,通过除漆、研磨等制得废铝易拉罐粉末(SAlCP)。利用SAlCP处理含U(VI)废水,优化处理工艺条件,采用SEM和XPS技术对SAlCP进行表征,并探讨了SAlCP去除U(Ⅵ)的机理。实验结果表明:在反应温度为30℃、溶液初始pH为5.0、U(Ⅵ)初始质量浓度为10 mg/L、SAlCP投加量为4 g/L、反应时间为120 min的优选条件下,U(Ⅵ)的去除率达98.2%。SAlCP去除U(Ⅵ)的反应过程可用拟一级动力学模型和Langmuir-Hinshelwood模型能较好地拟合。SAlCP的作用机理是还原沉淀-吸附共沉,且还原作用是SAlCP去除U(Ⅵ)的主要途径。     

Inhibiting effects of gas–particle mixtures containing CO2, Mg(OH)2 particles,and NH4H2PO4 particles on methane explosion in a 20-L closed vessel

The main risk factors from methane explosion are the associated shock waves, flames, and harmful gases. Inert gases and inhibiting powders are commonly used to prevent and mitigate the damage caused by an explosion. In this study, three inhibitors (inert gas with 8.0 vol% CO₂, 0.25 g/L Mg(OH)₂ particles, and 0.25 g/L NH₄H₂PO₄ particles) were prepared. Their inhibiting effects on methane explosions with various concentrations of methane were tested in a nearly spherical 20-L explosion vessel. Both single-component inhibitors and gas–particle mixtures can substantially suppress methane explosions with varying degrees of success. However, various inhibitors exhibited distinct reaction mechanisms for methane gas, which indicated that their inhibiting effects for methane explosion varied. To alleviate amplitude, the ranking of single-component inhibitors for both explosion pressure (P_ex) and the rate of explosion pressure rise [(dP/dt)_ex] was as follows: CO₂, NH₄H₂PO₄ particles, and Mg(OH)₂ particles. In order of decreasing amplitude, the ranking of gas‒particle mixtures for both P_ex and (dP/dt)_ex was as follows: CO₂–NH₄H₂PO₄ mixture, CO₂‒Mg(OH)₂ mixture, and pure CO₂. Overall, the optimal suppression effect was observed in the system with the CO₂–NH₄H₂PO₄ mixture, which exhibited an eminent synergistic effect on methane explosions. The amplitudes of P_ex with methane concentrations of 7.0, 9.5, and 11.0 vol% decreased by 37.1%, 42.5%, and 98.6%, respectively, when using the CO₂–NH₄H₂PO₄ mixture. In addition, an antagonistic effect was observed with CO₂‒Mg(OH)₂ mixtures because MgO, which was generated by the thermal decomposition of Mg(OH)₂, can chemically react with water vapor and CO₂ to produce basic magnesium carbonate (xMgCO₃·yMg(OH)₂·zH₂O), thereby reducing the CO₂ concentration in a reaction system. This research revealed the inhibiting effects of gas‒particle mixtures (including CO₂, Mg(OH)₂ particles, and NH₄H₂PO₄ particles) on methane explosions and provided primary experimental data.     

混合金属粉尘爆炸最小点火能量影响因素研究*

为探究混合金属粉尘爆炸危险性及与单一粉体爆炸特性差异,确保车间安全生产,采用粉尘云点火能量测试系统对车间混合金属粉尘及铝粉最小点火能量在不同影响因素下的变化规律及2种粉尘火焰变化特征进行测试。研究结果表明:混合金属粉尘和铝粉最小点火能量在一定范围内（38~96 μm）与粒径呈正相关性,当混合金属粉尘粒径大于75 μm时,所需最小点火能量大于1 000 mJ,其爆炸敏感性迅速降低,此时铝粉仍有较强爆炸敏感性;2种粉尘最小点火能量随质量浓度增加呈先降低后升高的趋势,最小点火能分别为295,15 mJ,对应的敏感质量浓度为600,1 000 g/m3,混合金属粉尘在质量浓度为500~700 g/m3时具有较大爆炸危险性;同铝粉相比,混合金属粉尘点火能量更高、火焰燃烧时间更短、火焰高度更低、爆炸剧烈程度更弱。     

干熄焦地下皮带通廊焦粉燃爆可能性研究

为研究干熄焦焦粉燃爆的可能性,在某焦化厂干熄焦输焦皮带机头和除尘站两个位置,取焦粉尘样进行工业分析和粒度分析,并测量地下皮带通廊代表段的焦粉尘浓度。分析显示,干熄焦地下皮带通廊焦粉水分较低,均低于3%;所选两个位置的粒度分布较为接近;实验测得所取焦粉尘的爆炸下限质量浓度在160~180 g/m~3之间。现场地下皮带通廊焦粉质量浓度值最高为8.95 g/m~3,远低于其爆炸下限,燃爆的可能性较低。     

无火源施放后超细微粒灭火剂运动特性研究

超细微粒灭火剂施放后的运动过程直接影响其灭火效果。通过数值模拟及试验研究灭火剂微粒施放后的流动、扩散和沉降等运动特性。模拟结果表明,灭火剂微粒施放后,向下运动到灭火室底部并撞击后向侧壁运动,随后向顶部运动,易在壁面及壁面底角处聚集。试验表明,微粒的运动分喷射运动和沉降扩散2个过程。前者微粒在驱动气流作用下在灭火室顶部、底部及墙壁处积聚,浓度较高。后者微粒主要受重力作用发生沉降,并在湍流气流作用下进行无规则扩散运动,导致灭火室顶部浓度最低;在灭火室垂直方向的一半高度处,浓度较高但波动剧烈;在灭火室底部,当喷射结束后有一个短暂的浓度低谷,随着微粒发生沉降,浓度逐渐升高。喷射压力对灭火剂的运动及浓度分布影响很大,压力过高或过低都会影响灭火剂微粒的全淹没灭火效果。根据试验结果,喷射压力为1.0 MPa时灭火效果较好。     

超细三七粉最小引燃温度实验研究

为研究三七粉着火燃烧的参数,用粉尘云引燃温度装置和粉尘层引燃温度装置,对三七粉的最小引燃温度(MIT)进行实验研究。分别研究喷吹压力、质量浓度、粉尘层厚度对MIT的影响。结果表明:三七粉尘云的质量在0.2 g时最小引燃温度随着喷尘压力的增加先减小再增大,在0.3 g到0.6 g时最小引燃温度随着喷尘压力的增加而增大;在压力20 kPa、30 kPa时随着质量浓度的增大,粉尘云引燃温度先减小后增大,在40 kPa到60 kPa时,随着质量浓度的增大,粉尘云引燃温度增大;粉尘云最小引燃温度高于粉尘层最小引燃温度;三七粉尘云的最小引燃温度399℃,粉尘层最小引燃温度240℃。