酸析—撞击流旋转填料床强化Fenton试剂氧化法预处理二硝基甲苯生产废水

采用酸析—撞击流旋转填料床( IS-RPB)强化Fenton试剂氧化法预处理二硝基甲苯(DNT)生产废水.最佳工艺条件为:酸析工段废水pH 1.0,IS-RPB转速1 500 r/min,FeSO4加入量0.06 mol/L,H2O2加入量0.45mol/L,反应温度40 ℃,反应时间4h.在该条件下处理DNT生产废水,COD去除率可达98.95％,硝基化合物去除率达98.32％,BOD5/COD为 0.65.经该方法预处理后的DNT生产废水可适用于生化法进行后续处理.     

选择性非催化还原烟气脱硝技术在流化床锅炉上应用的探讨

对选择性非催化还原（SNCR）烟气脱硝技术与选择性催化还原（SCR）烟气脱硝技术在流化床锅炉上应用的适应性进行了对比分析。分析结果显示,相对于SCR技术,SNCR技术更适于流化床锅炉,指出了SNCR技术在流化床锅炉上应用存在的问题,N2O难以去除。     

复杂难采高瓦斯煤层简易放顶煤开采综合防灭火技术研究

笔者在分析淮南矿区复杂难采高瓦斯煤层简易放顶煤开采工作面自然发火时空特点基础上 ,提出建立一套预测、预报、预防和充分准备灭火的防灭火体系 ,并阐述了预测、预报、预防的实施方法。该方法应用于淮南矿区 ,成功地开采了数个简易放顶煤工作面 ,综合防灭火技术取得了较好经济和社会效益。     

好氧内循环三相生物流化床处理低浓度废水研究

本研究探讨了好氧内循环三相生物流化床处理低浓度废水的可行性和生物膜生长特性。     

钡渣用于三相流化床烟气脱硫

提出了在三相流化床内用钡渣进行烟气脱硫的方法。分析了钡渣湿法脱硫原理，并进行了工艺改进实验，对两种不同溶渣方式工艺进行了静态和动态模拟实验，考察了两种方式的离子浓度和吸收容量等因素。实验表明，将渣先和水混合再用脱硫废水调整水质、脱硫塔进水pH在7．5左右时有利于系统的稳定运行。当液气比为2．88、气速为9．5m／s时，脱硫效率可以达到85％以上。这种方法可大大降低脱硫成本，实现以废治废。     

Biological mine drainage treatment

Drainage from sulphur mines contains a high concentration of ferrous iron and it is strongly acidic. The mechanism of acid mine drainage formation was briefly explained. As a case study, successful measures taken at the abandoned Matsuo mine, Iwate Prefecture, Japan, for preventing the pollution in receiving rivers was presented in this paper. The measures consisted of the construction works against pollution sources and the construction of a drainage treatment plant in which Thiobacillus ferrooxidans oxidizes ferrous iron under a low pH condition, and produced ferric iron is removed by sedimentation. Then, a laboratory-scale fluidized bed reactor using anion exchange resin as attaching material for the bacteria was examined in order to improve the efficiency of biological oxidation of ferrous iron. More than 90% of oxidation had been maintained for 2 months at 1 h of HRT, which suggests that the size of the oxidation tank could be reduced.     

AEB反应器反硝化处理高浓度硝酸盐废水

采用缺氧膨胀床(AEB)反应器处理高浓度硝酸盐废水,研究了反应器的快速启动和挂膜特性,以及在反硝化连续流运行条件下对废水的处理效果。实验结果表明:采用自然挂膜方式,填料层从下至上生物膜厚度逐渐增加;AEB的快速启动8 d可完成,COD去除率由44.9%升至92.3%,NO_3~--N去除率由39.8%升至98.4%;稳定运行阶段(进水COD 4 628～5 548 mg/L、ρ(NO_3~--N) 1 339～1 505 mg/L),COD去除率稳定在95%左右,NO_3~--N去除率稳定在98%～99%,COD和NO_3~--N的容积负荷去除量最高可达27.8 kg/(m~3·d)和7.3 kg/(m~3·d)。     

偶氮染料废水的电解处理

用复极性固定床电解槽处理偶氮染料废水,在正交试验确定的原水ＣＯＤ２００ｍｇ／Ｌ、槽电压３０Ｖ、停留时间２ｈ、导电颗粒与绝缘颗粒体积比１：４的条件下,色度和ＣＯＤ去除率分别达到９９％以上和７８．４－９８．２％。     

THE STABILITY OF BLOCKS SUBJECTED TO PLUNGING WATER JETS

Laboratory observations were made on the stability of cubical blocks subjected to plunging water jets. The blocks were placed in a plunge basin at the base of a flip bucket. A dimensionless equation was derived and a nomogram was drawn to facilitate its solution. The results can be applied to determine the size of stones required to armor a plunge basin or scour hole.     

超重力技术及其在环保中的应用

超重力技术是一项新兴的强化传递过程的技术 ,应用在环保、化工、材料、能源等领域可以大大强化传递过程。介绍了超重力技术的作用原理、研究进展和在环保中的应用 ,以及应用超重力技术的 2种旋转填料床