城市主干道交通噪声影响因素分析

选取了沈阳市lO条主干道,通过实地调查监测与文献资料分析相结合的方法,分析了主干道交通噪声的影响因素,结果表明,车流量与车型是影响城市主干道交通噪声的重要因素,并提出控制城市主干道交通噪声的防治措施,改善声环境质量。     

长三角重点行业大气污染物排放及控制对策

研究重点分析了长江三角洲地区电力和水泥行业的大气污染物排放特征,并结合相关行业统计数据和污染物排放因子,对2004年这两个重点行业的大气污染物排放量进行了估算。结论如下:长三角地区火电行业2004年SO2、烟尘、NOX和燃煤大气汞排放量分别为149.2×104t、21.1×104t、87.6×104t和13.7t。2004年江、浙、沪三地水泥行业共排放工艺粉尘76.2×104t,其中PM10为70.1×104t、PM2.5为45.9×104t,气态污染物SO2、NOX、CO和氟化物排放量分别为12.4×104t、49.5×104t、247.9×104t和7.4×104t。并对长三角地区电力和水泥行业的污染控制问题提出一些相关举措。     

新时期医疗废物处置技术体系的变革及发展

近20年来,我国在推进医疗废物无害化管理和处理处置方面开展了大量的工作,成绩举世瞩目。但处于新的历史时期,如何更好地基于可行技术,探索与其相匹配的管理模式,解决医疗废物处理处置短板已成为迫在眉睫的工作。我国目前存在针对医疗废物处理处置技术适用性考虑不足、农村及偏远地区医疗废物处置能力缺乏、医疗废物应急处置能力存在短板以及医疗废物领域科技创新能力有待提升等问题。因此,结合各种医疗处置技术特点及适用性,提出基于技术的适用性推进医疗废物处理处置技术布局优化、通过管理和技术进步解决农村和边远地区医疗废物处置难题、合理配置疫情期间应急处置能力以及推进科技创新等建议,为打造新时期医疗废物处理处置技术体系提供参考。     

原状黄土的反压饱和法试验研究

含水量是黄土液化特性研究中的一个至关重要的参数,对原状黄土进行充分饱和是饱和黄土动三轴试验中一个不可回避的课题。以WF公司生产的WF12440型空心圆柱扭剪仪为实验平台,运用反压饱和法,对室内原状黄土进行了饱和试验研究。该仪器提供3种不同加压方式增加围压和反压(孔压),即手动加压、自动加压和线性持续加压,通过检测孔隙压力系数B值是否达到0.95以上来判断黄土是否完全饱和。试验表明,即便是初始饱和度较低的原状黄土,也可以采用反压饱和法,在较短的时间内使孔压系数B值达到0.95以上,实现完全饱和,具体可以采用线性连续加压方式;初始压力差,即围压和反压之差一般可设为10 kPa,起始围压也设为10 kPa,太大或太小都会对试样造成破坏;如果孔压在1分钟内的变化值小于围压和反压之间压力差的5%,则认为孔压稳定,即可进行B值检测。     

An Observation Method for Analyzing Operators’ Routine Activity in Computerized Control Rooms

An activity analysis method was developed for studying the structure and dynamics of control room operators’ activity during normal operation based on directly observable elements of the operators’ behavior. The method assesses current activity along three dimensions in each 5-min period of the shift. Intensity characterizes arousal level, direction shows whether the activity is directed predominantly at the process control task, at something else, or miscellaneous. Motivation reflects if the activity is driven by intrinsic or extrinsic motivation. A case study is presented, in which 3 morning, 3 afternoon, and 3 night shifts of a Nuclear Power Plant operator crew are involved. The obtained results gave a deeper understanding of the operators’ activity and also revealed an “arousal compensation” tendency.     

Synergy Between Visual and Auditory Signals and Its Influence on the Follow-Up Regulation Quality

The study aimed at verifying a hypothesis that supporting a visual signal of regulation deviation with an auditory one could improve the quality of regulation; the operator would have better information on machine operation. A special simulator was applied to follow-up tracking with a manual lever which controlled vertical movements of a cursor on a monitor screen. Simultaneously with visual information on screen, the operator was provided with an auditory deviation signal of pre-determined characteristics. 33 young males underwent the test. It was found that supporting a visual signal with an auditory one resulted in an improvement in the regulation quality by 5-6%, which proved synergy between those signals. The results may be used in designing tele- and servo-mechanisms, especially for remote control machinery, e.g., inspection robots or micromanipulators controlled by operators in a follow-up system.     

Disparity of a Seat Cushion and Its Influence on Postural Control

Properties of supporting surfaces of a seat have an influence on postural control. Centre of pressure (COP) displacement parameters reflect both the balance controlling process and movements of the centre of a mass of entire body. The subjects of the study were 9 healthy men. A seat cushion was examined with a 2-force platform setup. Force exertion at a seat pan and feet and COP displacement at a seat pan were measured to analyse postural control. Analysis of variance determined the differences in postural control depending on a cushion type among the subjects. Significant differences in COP displacement parameters were in COP trajectory length, medio-lateral COP displacement and COP velocity. The results of the study showed that foam cushion ensures better postural control.     

Analysis of underlying causes of investigated loss of containment incidents in Dutch Seveso plants using the Storybuilder method

In the Netherlands there are around 400 “Seveso” sites that fall under the Dutch Major Hazards Decree (BRZO) 1999. Between 2006 and 2010 the Dutch Labour Inspectorate's Directorate for Major Hazard Control completed investigations of 118 loss of containment incidents involving hazardous substances from this group. On the basis of investigation reports the incidents were entered in a tailor-made tool called Storybuilder developed for the Dutch Ministry of Social Affairs and Employment for identifying the dominant patterns of technical safety barrier failures, barrier task failures and underlying management causes associated with the resulting loss of control events. The model is a bow-tie structure with six lines of defence, three on either side of the central loss of containment event. In the first line of defence, failures in the safety barriers leading to loss of control events were primarily equipment condition failures, pre start-up and safeguarding failures and process deviations such as pressure and flow failures. These deviations, which should have been recovered while still within the safe envelope of operation, were missed primarily because of inadequate indication signals that the deviations have occurred. Through failures of subsequent lines of defence they are developing into serious incidents. Overall, task failures are principally failures to provide adequate technical safety barriers and failures to operate provided barriers appropriately. Underlying management delivery failures were mainly found in equipment specifications and provisions, procedures and competence. The competence delivery system is especially important for identifying equipment condition, equipment isolation for maintenance, pre-start-up status and process deviations. Human errors associated with operating barriers were identified in fifty per cent of cases, were mostly mistakes and feature primarily in failure to prevent deviations and subsequently recover them. Loss of control associated with loss of containment was primarily due to the containment being bypassed (72% of incidents) and less to material strength failures (28%). Transfer pipework, connections in process plant and relief valves are the most frequent release points and the dominant release material is extremely flammable. It is concluded that the analysis of a large number of incidents in Storybuilder can support the quantification of underlying causes and provide evidence of where the weak points exist in major hazard control in the prevention of major accidents.     

基于剪切梁理论的爆破扰动对巷道顶板稳定性影响研究

厚煤层沿底布置巷道顶板维护难度较大,从爆破扰动影响顶板稳定性的角度对此进行了研究.在分析爆破应力波远区破坏效应的基础上,建立了沿底布置巷道顶板的剪切梁模型,依此研究了顶板煤、岩体的水平位移及应力分布规律,最后以某矿地质条件为原型利用Flac3D数值软件进行了模拟研究.研究发现:基于爆破应力波的远区破坏效应,沿底布置巷道的顶板煤层与上覆岩层的相对错动可以用剪切梁理论加以分析.基于此得到了厚煤层巷道顶板中煤层与岩层单调加载过程及循环加载条件下的位移及应力分布,单次爆破对顶板的影响有限,多次扰动的累积效应会对其产生一定程度的损伤.模拟中,随着装药量的增加,沿底布置巷道顶板煤、岩体的水平位移随之增加,且煤体的位移量大于岩体;持续扰动条件下,煤、岩体的水平位移均出现了累加效应,且随着动力扰动作用次数的增加,煤、岩体的相对错动逐渐增大,容易产生顶板离层垮落等动力灾害.研究成果对加强扰动作用下顶板的支护管理具有一定的理论与指导意义.     

建筑工人不安全行为影响因子分析及控制措施研究

为有效的控制建筑工人的不安全行为,从而减少事故,须分析出建筑工人不安全行为主要影响因素,并提出针对性控制措施。从各种不安全行为中提取13个影响因子,在此基础上通过访谈和调研获得直接影响矩阵,借助决策试验和评价实验室方法(DEMATEL)计算出每个因子的影响度、原因度和中心度,由此分析出安全态度、安全技能、安全认知和安全培训在影响因素体系中最为重要,领导的重视对建筑工人的不安全行为也有很大影响。结果表明:个人因素是影响工人安全行为的主要因素,环境因素和管理因素通过影响个人因素影响工人的安全行为。最后,针对个人影响因素,提出了合理开展安全培训、加强现场行为管理、加强安全心理干预、完善用工制度等措施。