Biodegradable plastic made from soybean products. II. Effects of cross-linking and cellulose incorporation on mechanical properties and water absorption

Soy isolate was treated with formaldehyde and glyoxal at 1.0, 2.5, and 5.0% (w/w isolate) and with adipic and acetic anhydrides. The materials were then compression-molded into plastic tensile bars and tested for tensile and yield strength, percentage elongation, Young's modulus, and water absorption. Treatment with 5% formaldehyde increased the tensile strength significantly, to 4.9 kg/mm², compared with the untreated sample (3.7 kg/mm²). The yield strength increased slightly, to 0.68 kg/mm². Elongation was significantly less after treatment with formaldehyde. Young's modulus increased after treatment and leveled off at 174 kg/mm². Water absorption decreased as the formaldehyde concentration increased. Treatment with either glyoxal or adipic/acetic anhydride had a detrimental effect on the mechanical properties of the plastic specimens. Water absorption was decreased by glyoxal treatment but was not affected by adipic/acetic anhydride treatment. Long-fiber (lf), short-fiber (sf), and microcrystalline (mc) cellulose were incorporated into soy isolate at various levels. Cellulose addition decreased the percentage elongation and increased the rigidity of the plastic. All three cellulose additions increased Young's modulus. The tensile strength increased with the addition of sf-cellulose to soy isolate; lf-cellulose decreased the tensile strength, whereas the incorporation of mc-cellulose did not have a significant effect. The yield strength increased slightly with the addition of sf-cellulose and was less affected by the addition of lf- or mc-cellulose. All three types of cellulose slightly decreased water absorption at ca. 15% content.Journal Paper No. J-15563 of the Iowa Agriculture and Home Economics Experiment Station, Ames; Project No. 2863.     

Synthesis of hydrogarnet from molten slag and its hydrogen chloride fixation performance at high temperature

Hydrogarnet was synthesized hydrothermally below 200°C using molten slag obtained from municipal solid waste. For comparison, it was also synthesized using pure-phase CaO–Al₂O₃–SiO₂–H₂O, as reported previously. The structural and textural properties of this material were investigated using various analytical and spectroscopic techniques such as X-ray diffraction, X-ray fluorescence spectrometry, atomic absorption spectrometry (AAS), thermogravimetry/differential thermal analysis, Fourier transform infrared spectroscopy, and scanning electron microscopy. The Cl⁻ fixation ability of hydrogarnet was investigated in the temperature range 500–800°C in a fixed-bed flow reactor using a HCl concentration (1000 p.p.m.v.) similar to that of incinerator exhaust gas. Under these experimental conditions, the hydrogarnet was capable of reducing the HCl gas level to less than 1 p.p.m.v. Analysis of the spent catalyst revealed that the hydrogarnet was being transformed into wadalite and CaCl₂ at high temperatures. The elution test for chromium ions in hydrogarnet obtained from slag was also used, and it was found that chromium ions were not eluted from hydrogarnet. Received: January 27, 2001 / Accepted: October 11, 2001     

Microwave-Assisted Solvent-Free or Aqueous-Based Synthesis of Biodegradable Polymers

Microwave radiation was used as the energy source for various types of chemical derivatizations of polysaccharides and for the synthesis of biodegradable polyesters in solvent-free or aqueous-based reaction systems. A medium to high degree of substitution was obtained for starch acetates, starch succinates, carboxymethyl konjac, aminated starch, and aminated chitosan. Ring-opening polymerization of lactide and -caprolactone proceeded rapidly even at low power output in the presence of tin octanoate catalyst. Complete monomer conversion and high molecular weight were achieved in less than 6 minutes under nonisothermal conditions. The yield rapidly increased with increasing power output and showed no significant change in a wide range of batch sizes. Polycaprolactone was successfully grafted from starch and konjac acetate in 3 minutes, yielding as high as 24% grafting efficiency and 25% grafting degree.     

基于风险的检验(RBI)在国内合成氨装置中的应用

利用API581基于风险的检验原理,采用RISKWISE分析软件对九江石化合成氨装置中的设备和管道进行了风险评估;并在装置采用的工艺、不同装置的设备和管道的失效机理和计算出的风险分布这3方面,将其风险评估结果与国内兄弟单位完成的其他合成氨装置的风险评估结果进行了比对;其结果体现了我国目前合成氨装置的设备和管道风险的大致分布,可供我国其他合成氨装置的风险评估参考,也为制定我国合成氨装置基于风险检验的法规标准提供了相关数据;同时,对国内采用针对装置的基于风险的检验的新模式进行了探讨。     

反应气氛对绿色合成纳米铁的组分及其活性的影响

成本低廉和无二次污染的"绿色"合成纳米材料是发展原位纳米环境修复技术的前沿研究课题之一.本文以绿茶提取液为还原剂和稳定剂进行"绿色"合成纳米铁,探讨在不同的气氛下"绿色"合成的纳米铁颗粒的主要成分,以期为调控合成纳米铁系材料提供基础研究.首先,利用扫描电子显微镜(SEM)、X射线能谱(EDS)、X射线光电子能谱分析(XPS)和傅里叶变换红外光谱(FTIR)等表征手段对不同反应气氛下合成的纳米铁颗粒的表面微观形貌、尺寸和价态结构进行分析.结果发现,在通入N2情况下,合成的纳米铁颗粒粒径为(84.7±11.5)nm,其主要成分以纳米零价铁为主;在通入空气情况下,合成的纳米铁粒径为(117.8±26.2)nm,其主要成分是纳米零价铁、氧化铁和四氧化三铁的混合物;通入O2时,合成的纳米铁粒径为(141.2±26.3)nm,其主要成分以四氧化三铁为主.其次,评价在不同气氛条件下合成纳米铁颗粒对去除亚甲基蓝(MB)的反应活性.结果表明,在反应温度313 K下降解初始浓度为50 mg·L-1的MB溶液,反应5 min时已达到平衡,通入N2合成的纳米铁降解MB,去除率高达98.7%,而通入O2合成的纳米铁反应效率低,对MB的去除率仅为65.3%.最后,从以上发现提出不同气氛下可以调控"绿色"合成的铁系纳米材料成分,从而导致不同的纳米修复环境中污染物的能力.     

单壁碳纳米管材料对水稻幼苗的毒性效应

随着碳纳米管材料(CNTs)被广泛地应用于工业和商业等多个领域,其将不可避免地进入到大气、水和土壤环境中,从而对生态系统结构和功能产生一些负面影响.为明确进入水环境中的碳纳米管材料对农业生产的潜在危险,本实验采用水培法,研究了不同浓度(10、20、40mg·L~(-1))的单壁碳纳米管材料(SWCNTs)对萌发期内水稻的发芽率、根长耐性指数和幼苗生长期内水稻的鲜重、叶绿素和可溶性蛋白的影响,以及单壁碳纳米管材料在水稻根部的累积.结果表明,在萌发期,胁迫处理4 d后,与对照相比,10、20、40 mg·L-1SWCNTs处理组对水稻发芽率没有任何抑制作用,但会延迟种子的发芽时间;水稻根长耐性指数随着单壁碳纳米管材料浓度的增加而下降.在幼苗生长期,胁迫处理30 d后,与对照相比,水稻鲜重随着单壁碳纳米管材料浓度的增加而分别下降14.2%、21.0%和38.8%;与此相类似,水稻叶绿素和可溶性蛋白质含量随着单壁碳纳米管材料浓度的增加而下降;另外,通过透射电镜观察(TEM)发现,SWCNTs颗粒分布在水稻幼苗根尖表皮细胞的细胞壁中.SWCNTs对水稻生长起抑制作用,且随着浓度的增加抑制作用逐渐增强.     

不同有机废水厌氧产酸过程的研究

主要研究了不同类废弃有机物厌氧产酸过程中产生的挥发性脂肪酸的产量和组成比例。研究发现,废糖蜜溶液、蛋白废液和淀粉废液在达到最高产酸量时,超过50%的VFAs是乙酸,其次是丙酸,还含有少量的丁酸和戊酸。废甘油溶液在达到最高产酸量时,产生的VFAs的主要成分是丙酸。4种有机废液中,相同初始COD浓度条件下,淀粉废液产生的VFAs产量最多,初始COD为5000mg/L时最高产量为2.321g/L,其次是废甘油溶液,最高产量是2.244g/L。     

Biochemical effects of some organo‐phosphorus insecticides on new targets in white rats

Abstract

The three S‐n‐propyl phosphates and phosphothioates: RH 218, profenofos and prothiophos were compared with fenitrothion in their potential as inhibitors of rat liver and brain AChE. Fenitrothion was more potent as an inhibitor than the three S‐n‐propyl derivatives. Incubation of hepatic protein enhanced ChE inhibition in brain in the case of fenitrothion, while it reduced the inhibitory effect of the S‐n‐propyl derivatives. On the other hand, the four organophosphorus esters caused hypoglycemia in both male and female rats and also reduced their blood urea with different degrees.