污水土壤含水层处理系统原理、管理、效率和应用

论述了污水土壤含水层处理系统中的地球化学过程.该系统通过对污染物的机械过滤、生物化学转化和降解过程、吸附/解吸过程、氧化/还原过程、沉淀/溶解过程、以及矿物的合成过程净化污水.运作周期通常为1～2 d灌水/4～5 d排干,年水力负荷变化于15～100 m之间,应根据季节变化调整水力负荷.该系统能有效去除污水中的微生物和悬浮物,降低COD和BOD含量,和去除潜在的有毒的无机成分,如重金属和含氧阴离子.作为一种低投资、低能耗、高净化效率、运行简单的自然的污水处理技术,其在世界各国得到了广泛应用.我国部分地区水资源极其短缺,在土壤和气候条件适合的地区,应用土壤含水层处理技术处理污水,实现污水资源化,既解决了污水污染环境问题,又将在一定程度上缓解该地区的水资源短缺问题,对于经济与环境的协调发展具有重要意义.     

化工园区生化出水氯代烃污染物的臭氧氧化降解

以化工园区污水处理厂生化出水为背景水样,考察了臭氧氧化对2,4,6-三氯酚、氯苯、1,2-二氯苯、对硝基氯苯、四氯酞酸5种特征氯代烃污染物的降解效果,并对其降解动力学进行了分析。实验结果表明:臭氧对2,4,6-三氯酚和氯苯的降解效果最好,反应30 min时的去除率均接近100%,其次为1,2-二氯苯和对硝基氯苯,反应30 min时的去除率分别为95.7%和36.0%,最差为四氯酞酸,反应30 min时的去除率仅为8.9%;臭氧对2,4,6-三氯酚和对硝基氯苯的降解符合零级动力学方程,对氯苯和1,2-二氯苯的降解符合一级动力学方程,对四氯酞酸的降解符合二级动力学方程。     

用造纸污泥制备改性木质素磺酸钠

以甲醛作改性剂,用造纸污泥制备改性木质素磺酸钠,通过正交实验考察了各种因素对改性木质素磺酸钠减水性能的影响。实验结果表明：木质素磺酸钠进行羟甲基化反应时,在10g粗品木质素中加入甲醛7mL、反应温度为45℃、反应液pH为10—11的最佳条件下,改性木质素磺酸钠的减水率为25．2％。经测试,改性木质素磺酸钠的各项性能指标均达到普通减水剂的国家标准要求。     

利用嗜酸性硫杆菌的生物产酸作用处理洗毛废水

利用洗毛废水在低pH条件下,有机物絮凝沉降的特点,通过嗜酸性硫杆菌(Acidophilic thiobacillus)的产酸作用降低体系pH,破坏废水固有的稳定性,改变有机物的亲水性能,实现固液分离,达到去除COD的目的.试验结果表明,生物产酸作用能有效地去除废水COD,改善其脱水性能.当体系pH降至3.00, COD去除率达到最大值91.4%,处理后的废水有很好的机械脱水和沉降性能,比阻从大于9.81×10¹³　m·kg^-1降至5.60×10¹¹ m·kg^-1.而对照处理在整个培养期内,未发生明显的改变,仅有20%的COD被去除.本研究为油脂含量高、难被生物利用的有机废水提供了一条新的处理方法.     

Denitrification potential enhancement by addition of external carbon sources in a pre-denitrification process

The aim of this study is to investigate the denitrification potential enhancement by addition of external carbon sources and to estimate the denitrification potential for the predenitrification system using nitrate utilization rate （NUR） batch tests. It is shown that the denitrification potential can be substantially increased with the addition of three external carbon sources, i.e. methanol, ethanol, and acetate, and the denitrification rates of ethanol, acetate, and methanol reached up to 9.6, 12, and 3.2 mgN/（g VSS.h）, respectively, while that of starch wastewater was only 0.74 mgN/（g VSS,h）. By comparison, ethanol was found to be the best external carbon source. NUR batch tests with starch wastewater and waste ethanol were carried out. The denitfification potential increased from 5.6 to 16.5 mg NO3-N/L owing to waste ethanol addition. By means of NUR tests, the wastewater characteristics and kinetic parameters can be estimated, which are used to determine the denitrification potential of wastewater, to calculate the denitrification potential of the plant and to predict the nitrate effluent quality, as well as provide information for developing carbon dosage control strategy.     

基于机制设计理论的环境政策初探

机制设计理论是研究在市场失灵的情况下,如何设计一套机制达到既定社会目标的理论。而环境问题的特殊性质使得单纯依靠市场无法合理有效的解决环境问题,这就需要机制设计这一理论的指导。基于机制设计理论的原理,已探索出很多环境政策,有效的预防并解决了污染问题,使公众利益与社会的总体利益达到了“激励相容”。本文在以排污税、排污权交易等环境政策的设计为例,探讨了机制设计理论在环境政策制定中的应用,同时分析了机制设计理论存在的问题,指出在经济全球化的背景下,依靠机制设计理论解决环境问题遇到的瓶颈,提出了利用机制设计理论制定环境政策未来的可能方向和着力点。     

Lead Solubilization and Accumulation by Two Strains of Pseudomonas Obtained from a Contaminated Alfisol's Effluent in Southwestern Nigeria

Two strains of Pseudomonas species (B₂ and D₅)selected from an array of lead solubilizing and accumulatingbacteria obtained from the effluent contaminated soil samples of abattery manufacturing factory were studied. Increase in pH between 4.0 and 6.0 favoured the growth of isolates: Peaklog₁₀ cfu mL^–1 values of 7.1, 7.5 and 8.5 wereobtained at pH 4, 5 and 6, respectively.Cell bound lead concentrations for B₂ (0.34 mg mL^–1)and D₅ (0.30 mg mL^–1) obtained by direct contact withPbs were greater than lead concentrations of 0.89 and 0.25 mg mL^–1 for B₂ and D₅, respectively,obtained in dialyzed cultures. These cell bound lead concentration in undialyzed cultures were alsogreater than lead concentrations of 0.03 and 0.07 mg mL^–1 for B₂ and D₅ in culture supernatants. Glucose addition did nor improve lead accumulation in the isolates.Exploitation of such isolates for the biotreatment of lead ladeneffluent was conducted.     

Impact of Bioaugmentation with a Consortium of Bacteria on the Remediation of Wastewater-Containing Hydrocarbons (5 pp)

Goals, Scope and Background It has been observed that hydrocarbon treated wastewaters still contain high COD and a number of intermediates. This suggests that the required catabolic gene pool for further degradation might be absent in the system or, that its titer value is not significant enough. By providing the desired catabolic potential, the overall efficiency of the treatment system can be improved. This study aims to demonstrate this concept by bioaugmentation of a lab-scale reactor treating refinery wastewater with a consortium having the capacity to complement the alkB genotype to the available microbial population. Methods Two reactors were set up using activated biomass collected from a refinery treatment plant and operated at a continuous mode for a period of 8 weeks. The feed to both reactors was kept constant. Crude oil was spiked regularly. One reactor was bioaugmented with a consortium previously described for crude oil spill remediation. The efficiency of the bioaugmented reactor was demonstrated by reduced COD. The changes in the microbial population over a period of time were analyzed by RAPD. Catabolic activity of the biomass in both reactors was monitored by PCR. The presence of the catabolic loci was confirmed by Southern Hybridization. Results and Discussion 52.2% removal of COD was observed in the bioaugmented reactor while only 15.1% reduction of COD was observed in the reactor without bioaugmentation. The change in microbial population can be seen from the 4th week, which also corresponds to improved catabolic activity. The presence of the bedA locus was seen in all samples, which indicates the presence of aromatic degraders, but the appearance of the alkB locus, from the 6th week onwards, which was observed only in the samples from the bioaugmented reactor. The results suggest that the gene pool of the bioaugmented reactor has catabolic loci that can degrade accumulated intermediates, thus improving the efficiency of the system. Conclusions In this study, improvement of efficiency of bioremediation was demonstrated by addition of catabolic loci that are responsible for degradation. Bioaugmentation was carried out in biomass that was collected from an ETP (effluent treatment plant) treating hydrocarbon containing wastewater to study the strategies for improvement of the treatment system. Biostimulation, only marginally improved the efficiency, when compared to bioaugmentation. The improved efficiency was demonstrated by COD removal. The presence of the alkB locus suggests the importance of a catabolic gene pool that acts on accumulated intermediates. It is well documented that straight chain aliphatics and intermediates of aromatic compounds after ring cleavage, accumulate in refinery wastewater systems, thereby hindering further degradation of the wastewater. Supplementation of a catabolic gene pool that treats the lower pathway compounds and alkanes will improve the overall efficiency. In this study, results suggest that the alkB locus can also be used to monitor the degradative mode of the activated biomass. Recommendations and Perspective . Pollution from petroleum and petroleum products around the globe are known to have grave consequences on the environment. Bioremediation, using activated sludge, is one option for the treatment of such wastes. Effluent treatment plants are usually unable to completely degrade the wastewater being treated in the biological unit (the aerator chambers). The efficiency of degradation can be improved by biostimulation and bioaugmentation. This study demonstrates the improved efficiency of a treatment system for wastewater containing hydrocarbons by bioaugmentation of a consortium that supports degradation. Further experiments on a pilot scale are recommended to assess the use of bioaugmentation on a large scale. The use of molecular tools, like DNA probes for alkB, to monitor the system also needs to be explored.     

Mechanical Property Characterization of Plasticized Sugar Beet Pulp and Poly(Lactic Acid) Green Composites Using Acoustic Emission and Confocal Microscopy

Sorbitol and glycerol were used to plasticize sugar beet pulp-poly(lactic acid) green composites. The plasticizer was incorporated into sugar beet pulp (SBP) at 0%, 10%, 20%, 30% and 40% w/w at low temperature and shear and then compounded with poly(lactic acid) (PLA) using twin-screw extrusion and injection molding. The SBP:PLA ratio was maintained at 30:70. As expected, tensile strength decreased by 25% and the elongation increased. Acoustic emission (AE) showed correlated debonding and fracture mechanisms for up to 20% w/w plasticizer and uncorrelated debonding and fracture for 30–40% sorbitol and 30% glycerol content in SBP–PLA composites. All samples had a well dispersed SBP phase with some aggregation in the PLA matrix. However, at 40% glycerol plasticized SBP–PLA composites exhibited unique AE behavior and confocal microscopy revealed the plasticized SBP and PLA formed a co-continuous two phase system.

Bacterial pretreatment enhances removal of heavy metals during treatment of post-methanated distillery effluent by Typha angustata L

A combination of bacterial pretreatment followed by free water surface flow through wetland plants was investigated to determine its effect on removal of heavy metals in bioremediation of post-methanated distillery effluent (PMDE). The bacterial pretreatment was intended to transform the metal complexes and organic pollutants into simpler, biologically assimilable molecules. The 10% and 30% v/v concentrations of PMDE favored luxuriant bacterial growth; the 50% concentration supported less growth, whereas the undiluted effluent (i.e., 100%) supported very little bacterial growth. The use of bacterial pretreatment combined with the constructed wetland system greatly increase the overall bioaccumulation of all heavy metals by the plants compared with the control treatment. However, the integration of bacterial pretreatment of PMDE with the Typha angustata resulted in enhanced removal of Cd (34.02–61.50% increase), Cr (35.90–57.60% increase), Cu (32.88–54.22% increase), Fe (32.50–51.26% increase), Mn (35.99–82.85% increase), Ni (35.85–59.24% increase), Pb (33.45–59.51% increase) and Zn (31.95–53.70% increase) compared with a control that lacked this pretreatment. In addition to the bioaccumulation of these heavy metals, several physico-chemical parameters also improved at the 30% effluent concentration: color, BOD, COD, phenol and total nitrogen decreased by 98.33%, 98.89%, 98.50%, 93.75% and 82.39%, respectively, after 7 days of free water surface flow treatment. The results suggest that bacterial pretreatment of PMDE, integrated with phytoremediation will improve the treatment process of PMDE and promote safer disposal of this waste.