The effects of activated Al2O3 on the recycling of light oil from the catalytic pyrolysis of waste printed circuit boards

The effects of employing activated Al₂O₃ during the catalytic pyrolysis of waste printed circuit boards (WPCBs) are investigated, focusing on the recycling of light oil. Variations in the pyrolysis process are studied through analysis of the phase distribution, water content and boiling point fractions of the resulting products. Product composition and carbon number distribution are analyzed using gas chromatography techniques. The use of activated Al₂O₃ increases the light oil fraction and also reduces the quantity of brominated products formed. It was determined that the best yield of light oil and most efficient debromination resulted from catalytic pyrolysis at 600 °C. Applying catalyst-to-feed ratios in the range of 1.0–1.5 also maximizes the yield of light oil. The major oil fraction resulting from catalytic pyrolysis has a boiling point range of 0–250 °C and carbon number range of C6–C9, showing for use as a potential fuel after suitable treatment such as hydrogenation. At a higher catalyst-to-feed ratio of 2.0, activated Al₂O₃ generates a high proportion of light oil fractions containing a significant quantity of chemicals such as phenol (52.67% at 600 °C), although an overall lower yield of oil is obtained. The oil produced in this manner may also be used as a raw material feedstock for the production of various other useful chemicals.     

控氧热解过程中污染稻草生物炭的组分特性及其重金属累积特征

热解是实现重金属污染生物质无害化资源化的重要手段之一.以重金属污染稻草为原料,研究了控氧热解生物炭的组分特性及其重金属的累积特征.结果表明,低氧热解可有效利用污染稻草制备生物炭,提高重金属在生物炭中的稳定性.氮气氛条件下,稻草生物炭产率为29.4%～34.9%;可溶性有机质(DOM)以类腐殖酸物质为主,其芳香化指数(SUVA₂₅₄)随热解温度升高呈先升后降趋势;生物炭中Ca主要以CaCO₃形式存在.与氮气氛相比,10%和20%(体积分数,下同)氧气氛条件下生物炭(热解残渣)的产率分别降低5.6%～13.5%和14.9%～15.7%,但pH值提高0.5个单位以上;有氧气氛加速了热解过程中木质素组分的降解,生物炭中DOM的SUVA₂₅₄值随热解温度升高逐渐降低.随热解气氛中氧体积分数提高,DOM中类腐殖酸物质向类富里酸物质转化;生物炭中Ca以CaO形式存在,这可能是导致生物炭pH值升高的原因之一.与氮气氛相比,10%氧气氛和400℃条件下,生物炭中Cu、 Cd、 Pb、 Ni和As的可交换形态占比降低了5.2%、 3.7%、...     

医疗废物制备木酢液及其成分分析

为了解以医疗废物为原料的木酢液制备特性和木酢液的成分,采用磁化热解装置进行调制试验,收集了热解冷凝液,并采用GC-MS对冷凝液的成分进行了分析。检测出有机酸、酚、醛、酮、酯等38种有机成分,并采用面积归一化法对主要成分进行定量分析。结果表明,医疗废物磁化热解冷凝液中的成分种类与木酢液十分接近,特别是乙酸(18.48%)与苯酚(5.15%)的含量较高,证明了依靠磁化空气热解医疗废物制备木酢液的可行性。而两者之间存在的成分差异对其功用的影响则有待进一步探究。     

Spatial and temporal variability of water repellency in a sandy soil contaminated with tar oil and heavy metals

Water repellency can induce preferential flow and thus affect water flow and contaminant transport at hazardous waste sites. Since the spatial patterns of water repellency are mostly unknown, it is problematic to use numerical transport models to predict leachate composition. In this study, the spatial variability of soil water repellency was studied at an industrial site contaminated with tar oil, chromium, copper and arsenic. The persistence of water repellency was assessed by the water drop penetration time (WDPT), and the degree of water repellency was quantified by the ethanol percentage (EP) test. Measurements were made at the soil surface along 3.5-12.1 m long transects at different times between March and October 2002. The spatial variability of WDPT, EP, water content, and organic matter content was quantified by variogram analyses. Both the persistence and the degree of water repellency varied seasonally, with the highest water repellency during the summer months. The correlation lengths of WDPT values ranged between 16 and 406 cm, whereas EP values showed no spatial correlation. For field-moist samples, a critical soil water threshold, below which water repellency prevails, was estimated to be 2.5-4%. For oven dry samples, the WDPT values were dependent on the water content prior to drying. The wide range of correlation lengths and the temporal dynamics of spatial repellency patterns suggest that simulations of solute leaching must consider the spatial and temporal variability of soil hydrophobic properties.     

固体废物在固定床式热解炉内热解产气特性的实验研究

垃圾热解技术以其较低的污染排放和较高的能源回收率在固体废弃物处理领域里占有重要地位。利用小型外热型热解炉对城市垃圾、生物质及有害固体废弃物进行热解实验 ,分析发现 ,物料的挥发分、加热方式以及热解终温等对产气影响大 ,随温度的增加产气中H2 含量逐渐增多 ,C2 H4和C2 H6 的含量逐渐下降 ,气体热值有一个最大值。     

生物质废弃物催化裂解制备富氢燃气实验研究

由生物质废弃物催化裂解制取氢气是一种可再生的制氢方法，本研究采用2段加热管式反应器，前段装生物质，后段装催化剂，用以研究生物质催化裂解制取氢气的特性，并提出潜在氢产率的概念对生物质制氢的经济技术可行性进行深入的分析。测试的3种生物质废弃物为：松木粉、木质素和纤维素，测试温度为600～700℃。实验结果表明，加入催化剂后3种物料的产氢率从5．48～15．06g／kg增加到12．94～37．73g／kg；催化剂对潜在产氢率的影响较小，加入催化剂前后的变化范围为：36、25～98、86g／kg到37．40～116．98g／kg。生物质废弃物催化裂解产氢率与相同温度下空气-水蒸气气化的氢产率相当，实验结果证明，生物质废弃物催化裂解是一种有效的制氢方法。     

印刷线路板废弃物的热解与动力学实验研究

分别应用管式炉反应器和热重分析手段对印刷线路板废弃物的热解行为和热解动力学进行了实验研究。在管式炉中，研究不同的热解温度：700～950℃，对产物分布和气体成分分布的影响。实验结果表明：PCB热解气体的主要成分是H2和CO2，气体的热值较低，仅为2．09～5．41MJ/m^3，PCB不适合以气体产物为目标的能源利用方式。应用Friedman方法对PCB的热解动力学进行了研究，求得PCB的热解动力学参数分别是：表观活化能190．92kJ/mol，反应级数5．97，指前因子lnA47．14min^-1。     

市政污泥热解过程颗粒物中重金属分布

以深圳市某污水处理厂的污泥为原料,研究了污泥热解过程产生的颗粒物及其中8种重金属的分布规律.结果表明,颗粒物的生成速率分别在400~600℃和1000℃保温30min的两个区间内达到峰值.8种重金属的热挥发性由大到小依次为Cd > Zn > As > Pb > Mn > Ni > Cu > Cr,而其在颗粒物中富集能力大小顺序为Pb > As > Mn > Zn > Cd > Ni > Cr > Cu.颗粒物重金属在热解气中的体积浓度随热解过程呈上升趋势,Zn和Cd则在升温阶段（1000℃以前）达到峰值后开始降低.研究表明,污泥热解颗粒物富集的重金属超标,因而污泥热解尾气颗粒物的去除装置十分必要.     

包装废弃物添加脱氯半焦制备SRF的热解及动力学特性

利用热重红外分析仪(TG-FTIR)对包装废弃物添加了4种不同比例脱氯半焦制备而成的固体衍生燃料(SRF)的热解特性及热反应动力学进行了研究分析.研究发现,4种燃料热解过程主要包括4个阶段,其中300~400℃和400~500℃为两个主要失重阶段.前一阶段,SRF-1失重显著高于SRF-2、SRF-3和SRF-4,而后一阶段失重分别呈2、3、4倍增加.4种燃料热解残余量的顺序为SRF-4SRF-3SRF-2SRF-1,即添加了脱氯半焦的燃料热解程度越高.FTIR分析表明,添加了脱氯半焦的SRF燃料第三失重峰处不产生氯代烃.随脱氯半焦添加量的增加,第二失重峰CO2产生的浓度减少;第三失重峰CH4析出浓度增加;第四失重峰CO2析出的浓度增加.采用DEAM分布活化能法得到,转化率α0.3时,SRF-2和SRF-3的活化能均高于SRF-1的活化能,0.3α0.9时(α为0.6时除外),SRF-2、SRF-3和SRF-4 3种燃料的活化能低于SRF-1,且SRF-1的活化能呈升高的趋势,而其他3种燃料呈相反趋势.脱氯半焦的添加有利于SRF燃料的热解.     

红外分光光度法测定水中动植物油的不确定度评定

文章对红外分光光度法测定水中动植物油的不确定度来源进行了分析,构造出合理的数学模型,确定了各输入量之间的关系,量化各分量后,合成得到满意的结果。从而提出,根据被测量及其所依赖的输入量之间的关系构造数学模型,并综合运用不同的评定方法对各个分量进行量化,可实现对某些检测项目的不确定度评定。