输气场站工艺安全风险分析

针对输气场站HAZOP风险评估出的天然气泄漏风险进行工艺安全量化分析,通过天然气泄漏喷射火模拟,对天然气泄漏风险进行量化,为输气场站的安全管理提供有效的技术支持。通过量化,分析出对天然气泄漏喷射火造成后果大小的影响因素,提高了HAZOP风险分析的准确性和科学性,对输气场站的风险管理具有参考意义。     

Effects of Ca2+ ions antagonistic to Al3+ ions poisoningin root growth , cell division and nucleolusin root tip cells of Allium cepa

The effects of different aluminium chloride concentrations together with varying calciumchloride concentrations on root growth, cell division and nucleoli in root tip cells of Allium cepa werestudied. The concentrations used for aluminium chloride were 10^-4, 10^-3 and 10^-2 mol/L ; and for calcium chloride were 10^-5 , 10^-4 , 10^-3 and 10^-2 mol/L, respectively. The results showed that after thetreatments with 10^-2 to 10^-3 mol/L Al³⁺ , root growth was severely inhibited , a large nurnber of thecells with c-mitosis were induced and the nucleolar material was extruded from the nucleus into the cytoplasm. However , the treatments with 10^-2 to 10^-3 mol/L of Al³⁺ together with 10^-2)to 10^-5 mol/LCa²⁺ suggested that Ca²⁺ gave the obviously protective effects against Al³⁺ poisoning in root growth.cell division and nucleoli of the root tip cells in A. cepa. The possible mechanism of these protective effects of Ca²⁺) is also briefly discussed.     

哈尔滨市轨道交通一期工程电磁辐射环境影响分析及防护措施初探

在现代化城市建设与发展中,城市轨道交通引起的电磁辐射环境影响,越来越受到公众的关注,越来越受到各级政府的重视.本文以哈尔滨城市轨道交通工程为例,分析本工程的电磁辐射污染源,采用类比方法,预测和评价电磁辐射对环境的影响,提出了电磁辐射防护措施建议.     

大理州电磁辐射环境污染特征及防治

电磁能在人类生产、生活中得到广泛应用 ,而电磁辐射对环境的影响却并不为大多数人们所认识。本文通过对大理州电磁辐射环境污染现状和特征进行分析 ,提出相应的污染防治对策及建议 ,为今后本地区的电磁辐射环境管理提供科学依据     

TiO2膜固载型多孔催化剂的光催化分解试验

以多孔基质为载体,用溶胶-凝胶法制备出载ＴｉＯ２薄膜的多孔型光催化剂。用Ｘ射线衍射和扫描电镜对催化剂的物相和形貌进行了表征，此催化剂能在光照下分解水溶液中四环素抗菌素。经１ｈ光照，四环素的分解率可达８５％左右。     

电磁辐射污染与防护

随着电子技术的飞速发展,电磁辐射污染问题日趋严重.通过对电磁辐射的理论、危害、污染现状及其目前防治对策的研究得出:在现有的对电磁辐射环境防护措施的基础上,需要在宣传教育、环境标准的制定、环境监测手段、环境质量评价以及电磁辐射防护产品的开发几方面投入更多精力,以便更好的维护公众健康.     

Decomposition of CF3CI by corona discharge

In this paper pulsed corona discharge is shown to be effective for the decomposition of CF₃Cl(Freon-13).The pressure of CF₃Cl was 2.67×10³Pa,after discharged for 2 min,39.5% of CF₃Cl was decomposed.The products were mainly CF₄,Cl₂ and CF₂Cl₂.The yield increased by adding O₂ or air.Under the same conditions,more than 94% decomposition yield was obtained if 5.32×10³Pa O₂ or air was added.The composition of products became CF₂O,Cl₂ and CF₄.While the partial pressure of O₂ or air reached 1 arm,the decomposition yield decreased to 54.5% and 48. 5% respectively.     

Catalysts for decomposing ozone tail gas

The preparation of immobilizing-catalysts for decomposing ozone by using dipping method was studied. XRD, XPS and TEM were used to characterize the catalysts. The three kinds of catalysts were selected preferentially, and their catalytic activities were investigated. The results showed that the catalyst with activated carbon dipping acetate( active components are Mn:Cu = 3:2, active component proportion in catalyst is 15%, calcination temperature is 200℃ ) has the best catalytic activity for ozone decomposing. One gram of catalyst can decompose 17.6g ozone at initial ozone concentration of 2.5g/m^3 and the residence time in reactor of 0.1s. The experimental results also indicated that humidity of reaction system had negative effect on catalytic activity.     

Heterojunctioned CuO/Cu2O catalyst for highly efficient ozone removal

In recent years, near surface ozone pollution, has attracted more and more attention, which necessitates the development of high efficient and low cost catalysts. In this work, CuO/Cu₂O heterojunctioned catalyst is fabricated by heating Cu₂O at high temperature, and is adopted as ozone decomposition catalyst. The results show that after Cu₂O is heated at 180°C conversion of ozone increases from 75.2% to 89.3% at mass space velocity 1,920,000 cm³/(g·hr) in dry air with 1000 ppmV ozone, which indicates that this heterojunction catalyst is one of the most efficient catalysts reported at present. Catalysts are characterized by electron paramagnetic resonance spectroscopy and ultraviolet photoelectron spectroscopy, which confirmed that the heterojunction promotes the electron transfer in the catalytic process and creates more defects and oxygen vacancies in the CuO/Cu₂O interfaces. This procedure of manufacturing heterostructures would also be applicable to other metal oxide catalysts, and it is expected to be more widely applied to the synthesis of high-efficiency heterostructured catalysts in the future.     

织物及服装防热辐射性能的测试

为评价织物及服装的防热辐射性能,在我们实验室和现场进行了测试。采用黑体比较法测量的织物发射率和参照国际标准ISO—6942进行的热辐射阻挡实验分析评价了一般织物、金属布和所谓“太空棉”服装的防热辐射性能。对金属布工作服和遮阳伞的透过热流和环境空气温度及辐射热强度的现场测试,可以直接分析防热辐射效果,也与工作人员的感觉相吻合。合理测试评价方法的建立,可以促进这类材料和服装的研究与推广。建议有关部门尽快制定标准。