数据包络分析(DEA)模型在清洁生产评价中的应用

清洁生产技术方案评价对于指导企业实施清洁生产有重要意义。将污染物产生量数据作为一种输入引入数据包络分析(DEA)模型，利用该模型对清洁生产技术方案中的投入、产出和污染物发生量进行有效性评价。分析不同方案相对效率值、目标改进值，发现最有效的清洁生产技术方案，达到经济效益和环境效益的统一。本研究为企业筛选和决策可实施清洁生产技术方案提供技术理论支持。     

序批式活性污泥法在炼油化工废水处理中的应用

炼油化工废水处理的传统处理工艺中存在一定的弊端。为此,玉门炼油化工总厂对其废水处理设施进行了改建和扩建,其生物处理系统采用了序批式活性污泥法处理工艺。经过 3年运行的结果表明:该系统运行效果良好,处理后的水质可达到《GB8978-1996》(石化)一级排放标准的要求;化学需氧量(COD)和生化需氧量(BOD)分别降低78.6%和91.2%,硫化物去除率为98.2%,挥发酚去除率为99.6%。而且该反应器具有较强的耐冲击负荷能力,进水中COD在600 mg/L以下且有大幅度波动时,该系统仍可稳定地运行,处理后的水可达标排放。     

Genetically Modified (GM) Crops: Precautionary Science and Conflicts of Interests

Risk governance of GM plants and GMfood products is presently subject to heatedscientific and public controversies. Scientistsand representatives of the biotechnologyindustry have dominated debates concerningsafety issues. The public is suspicious withregard to the motives of scientists, companies,and political institutions involved. Thedilemmas posed are nested, embracing valuequestions, scientific uncertainty, andcontextual issues. The obvious lack of data andinsufficient information concerning ecologicaleffects call for application of thePrecautionary Principle (PP). There are,however, divergent opinions among scientistsabout the relevance of putative hazards,definition of potential ``adverse effects,' andwhether actions should be taken to preventharm. The reliance on the concept ofsubstantial equivalence in safety evaluation ofGM food is equally controversial. Consequently,value assumptions embedded in a scientificframework may be a barrier for employment ofthe PP. One of our major conclusions is thatprecautionary GMP usage requires riskassessment criteria yet undeveloped, as well asbroader and more long-term conceptions of risk,uncertainty, and ignorance. Conflicts ofinterest and public participation are otherissues that need to be taken intoconsideration. GMP governance regimes that arejustifiable from a precautionary and ethicalpoint of view must transcend traditionalscientific boundaries to include alternativescientific perspectives as well as publicinvolvement.     

BUILDUP,WASHOFF, AND EVENT MEAN CONCENTRATIONS1

ABSTRACT: Most watershed water quality simulation models require the user to specify pollutant buildup and washoff rate parameters for pollutants, by land use. Buildup and washoff rates are difficult to measure directly, and only limited guidance and few observed data are available from the literature. Many studies, however, report storm event mean concentrations (EMCs). These EMCs must arise as a result of the buildup and washoff processes, but typically represent the net contribution from a variety of pervious and impervious surfaces. This paper explores the relationship between EMCs and buildup/washoff parameters. An assumption of the mathematical form of the buildup/washoff relationship gives an algebraic expression for the EMC consistent with model assumptions. This yields techniques to separate observed EMCs into contributions from different land uses and from pervious and impervious surfaces. Given this relationship, numerical optimization may be used to estimate site specific values of buildup and washoff parameters from observed storm EMCs for use in modeling. Use of this approach helps ensure that model parameters are consistent with observed data, providing a rational starting point for final model calibration. Several site examples demonstrate use of the method.     

入侵检测的1类支持向量机模型

计算机网络尤其是互联网的迅速发展与普及 ,使得信息安全已经成为一个全球瞩目的重要研究课题。随着攻击技术的不断进步与更新 ,迫切需要一种有效的入侵检测技术来保护信息系统的安全。由于几乎所有的攻击与滥用都被记录在系统的网络数据中 ,因而可以基于计算机系统的网络数据构造入侵检测系统。在对网络数据进行深刻的分析和研究的基础上 ,提出了入侵检测的 1类支持向量机模型。第一 ,构造适于异常点检测的1类支持向量机模型 ;第二利用抽象化的网络数据对该模型进行训练以确定其中各个参数的值。实验表明 ,该方法是行之有效的     

利用地理信息系统(GIS)开发多功能空管系统

在航空运输中 ,飞行安全最为重要 ,空管指挥是保证飞行安全的重要手段。地理信息系统 (GIS)能够将空间位置和性质属性结合在一起 ,非常适合空管指挥中直观性、安全性方面的需要。笔者在研究开发多功能空管系统的基础上 ,讨论了对地形、地物、航道、空管区、禁飞区等进行数字化的方法 ,提出了系统开发的主要技术 ,介绍了多功能空管系统的显示、控制、示警、辅助决策、智能纠错等功能 ,指出了空管系统的发展方向     

移动床生物膜反应器充氧能力的试验研究

对移动床生物膜反应器的充氧能力进行了试验研究，结果表明：反应器充氧能力在添加填料比无填料时大；在悬浮载体能够均匀流化的填充率范围内，反应器充氧能力随着填充率的增大而增大；当填充率大于可以均匀流化的最大填充率时，反应器的充氧能力略有下降。     

Microbial cycling of iron and sulfur in acidic coal mining lake sediments

Lakes caused by coal mining processes are characterized by low pH, low nutrient status, and high concentrations of Fe(II) and sulfate due to the oxidation of pyrite in the surrounding mine tailings. Fe(III) produced during Fe(II) oxidation precipitates to the anoxic acidic sediment, where the microbial reduction of Fe(III) is the dominant electron-accepting process for the oxidation of organic matter, apparently mediated by acidophilic Acidiphilium species. Those bacteria can reduce a great variety of Fe(III)-(hydr)oxides and reduce Fe(III) and oxygen simultaneously which might be due to the small differences in the redox potentials under low pH conditions. Due to the absence of sulfide, Fe(II) formed in the upper 6 cm of the sediment diffuses to oxic zones in the water layer where itcan be reoxidized by Acidithiobacillus species. Thus, acidic conditions are stabilized by the cycling of iron which inhibits fermentative and sulfate-reducing activities. With increasing sediment depth, the amount of reactive iron decrease, the pH increases above 5, and fermentative and as yet unknown Fe(III)-reducing bacteria are also involved in the reduction of Fe(III). Sulfate is reduced apparently by the activity of spore-forming sulfate reducers including new species of Desulfosporosinus that have their pH optimum similar to in situconditions and are not capable of growth at pH 7. However, generation of alkalinity via sulfate reduction is reduced by the anaerobic reoxidation of sulfide back to sulfate. Thus, the microbial cycling of iron at the oxic-anoxic interface and the anaerobic cycling of sulfur maintains environmental conditions appropriate for acidophilic Fe(III)-reducing and acid-tolerant sulfate-reducing microbial communities.     

Starch, Poly(lactic acid), and Poly(vinyl alcohol) Blends

Research on biodegradable materials has been stimulated due to concern regarding the persistence of plastic wastes. Blending starch with poly(lactic acid) (PLA) is one of the most promising efforts because starch is an abundant and cheap biopolymer and PLA is biodegradable with good mechanical properties. Poly(vinyl alcohol) (PVOH) contains unhydrolytic residual groups of poly(vinyl acetate) and also has good compatibility with starch. It was added to a starch and PLA blend (50:50, w/w) to enhance compatibility and improve mechanical properties. PVOH (M_W 6,000) at 10%, 20%, 30%, 40%, 50% (by weight) based on the total weight of starch and PLA, and 30% PVOH at various molecular weights (M_W 6,000, 25,000, 78,000, and 125,000 dalton) were added to starch/PLA blends. PVOH interacted with starch. At proportions greater than 30%, PVOH form a continuous phase with starch. Tensile strength of the starch/PLA blends increased as PVOH concentration increased up to 40% and decreased as PVOH molecular weight increased. The increasing molecular weight of PVOH slightly affected water absorption, but increasing PVOH concentration to 40% or 50% increased water absorption. Effects of moisture content on the starch/PLA/PVOH blend also were explored. The blend containing gelatinized starch had higher tensile strength. However, gelatinized starch also resulted in increased water absorption.     

活性污泥吸附重金属Cr6+的研究

以活性污泥为材料，采用不同时间、温度、pH进行吸附重金属Cr^6 的研究。实验结果表明，当吸附时间为15min，吸附温度为28℃，吸附pH=7时具有较好吸附效果。在此条件下，当重金属Cr^6 浓度为50mg/L，其吸附率可达97．2％。