Application of response surface methodology for the optimization of biodiesel production from yellow mustard (Sinapis alba L.) seed oil

In the present study, response surface methodology (RSM) involving central composite design (CCD) was applied to optimize the reaction parameters of biodiesel production from yellow mustard (Sinapis alba L.) seed oil during the single-step transesterification process. A total of 30 experiments were designed and performed to determine under the effects of variables on the biodiesel yield such as methanol to oil molar ratio (2:1–10:1), catalyst concentration (0.2–1.0 wt.% NaOH), reaction temperature (50–70°C), and reaction time (30–90 min). The second order polynomial model was used to predict the biodiesel yield and coefficient of determination (R²) was found to be at 0.9818. The optimum biodiesel yield was calculated as 96.695% from the model with the following reaction conditions: 7.41:1 of methanol to oil molar ratio, 0.63 wt. % NaOH of catalyst concentration, 61.84°C of reaction temperature, and 62.12 min of reaction time. It is seen that the regression model results were in agreement with the experimental data. The results showed that RSM is a suitable statistical technique for optimizing the reaction parameters in the transesterification process in order to maximize the biodiesel yield.     

微生物调控对有机废物堆肥的理化性质影响研究

研究了微生物调控对有机生活废物堆肥的理化性质影响,结果表明:添加微生物处理比对照处理提前1 d进入高温分解期,且高温(>50℃)持续时间为6 d,较对照处理的长3 d;pH呈先升高后降低的趋势,微生物处理的pH值对照处理的偏低;EC值呈"M"型变化规律,微生物处理的EC值较对照高;在整个堆肥过程中微生物处理的胡敏酸E 4/E 6值都低于对照,表明添加菌剂有利于生活垃圾腐殖化;以发芽指数GI均大于80%这一标准评判,微生物处理比对照提前8d腐熟.     

广西不同地理区域森林土壤水文物理性质研究

对广西９个不同区域森林土壤（０－１００ｃｍ）水文物理性质进行测定,结果表明,不同林型的土壤容重为０．５４～１５５ｇ／ｃｍ３;总孔隙度３９％一９６．４％;最大持水量４１１．７～７５９．６ｍｍ;通气度３．２％～２７．６％;平均渗透速度０．７９～３８．５ｍｍ／ｍｉｎ。不同土类及林型的土壤容重的大小为;黄壤＜红壤和阔叶林或针阔叶混交林＜针叶林,而总孔隙度、持水量、通气度及渗透速度则相反。     

白洋淀北岸农田土壤特性的表征

本文采用标准方法,测定了白洋淀北岸部分农田土壤的粒度组成、ｐＨ和有机碳含量等指标,对该地区土壤的特性进行了表征分析。结果表明,土壤的平均粒度分布大于２０μｍ的占５２．７３％,主要属于砂壤土。与１０年前相比,ｐＨ值变化不大;而有机碳含量是１０年前的１．２６倍。ｐＨ随土壤的垂直深度而略有增加,而有机碳含量则随土壤的垂直深度而减少。     

丙烯酰胺降解细菌的质粒检出及生长特性研究

从化工厂的活性污泥中筛选出具有降解丙烯酰胺能力的细菌12株,经鉴定均为不动杆菌属。碱裂解法抽提显示质粒检出率为75%,并在质粒量上有所差异。在实验室条件下,这些菌株中对丙烯酰胺的最大耐受力可达40mg/mL;12株菌株都对氨苄青霉素有抗性,而对链霉素、卡那霉素、庆大霉素及氯霉素无抗性;在以丙烯酰胺为唯一碳源的无机盐培养基中,菌株DAW01在30℃,108γ/min旋转式摇床振荡培养6d后,对丙烯酰胺降解能力可达45.01%。     

Evaluation of activated sludge properties’ changes in industrial-wastewater pre-treatment: role of residual aluminum hydrolyzed species with different polymerization degree

● Medium poly Al salts dominated the PAC residual salts with a rational dosage. ● Settlement flocculation effect under medium poly Al salts showed a better trend. ● Complex of medium poly Al salts and enzymes promoted cell activity. ● Medium poly Al salts were beneficial to the effluent indexes. With the widespread introduction of pre-coagulation prior to the biological unit in various industrial wastewater treatments, it is noteworthy that long-term accumulation of residual coagulants has certains effect on both micro and macro characteristics of activated sludge (AS). In this study, the morphology distributions of residual aluminum salts (RAS) and their effects on the removal efficiency of AS were investigated under different PAC concentrations. The results showed that the dominance of medium polymeric RAS, formed under an appropriate PAC dose of 20 mg/L enhanced the hydrophobicity, flocculation, and sedimentation performances of AS, as well as the enzymatic activity in cells in the sludge system, improving the main pollutants removal efficiency of the treatment system. Comparatively the species composition with monomer and dimer / high polymer RAS as the overwhelming parts under an over-dosed PAC concentration of 55 mg/L resulted in excessive secretion of EPS with loose flocs structure and conspicuous inhibition of cellular activity, leading to the deterioration of physico-chemical and biological properties of AS. Based on these findings, this study can shed light on the role of the RAS hydrolyzed species distributions, closely relevant to Al dosage, in affecting the comprehensive properties of AS and provide a theoretical reference for coagulants dosage precise control in the pretreatment of industrial wastewater.     

植筋搭接混凝土柱偏心受压性能试验研究

对钢筋混凝土植筋搭接柱在静载作用下的偏心受压破坏进行了探索性的研究。通过试验,得到了试验柱的承载力与锚固长度、跨中弯矩与挠度、荷载与位于搭接段跨中截面受压区混凝土应变等关系曲线。试验结果认为,钢筋混凝土搭接柱在混凝土未被压坏的前提下,发生的钢筋锚固失效主要是锚固强度失效,并确认了植筋试件的薄弱面。另外,试件破坏时的粘结应力随锚固长度的增加逐渐减小。而对FISV360S植筋胶来说,锚固长度的增加能明显地提高试验梁的极限承载力。最后分别提出了临界锚固长度计算公式和试验柱极限承载力计算公式。     

Preparation and catalytic properties of ZrO2-Al2O3 composite oxide supported nickel catalysts for methane reforming with carbon dioxide

ZrO2-Al2O3 composite oxides and supported Ni catalysts were prepared, and characterized by N2 adsorption/desorption, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) techniques. The catalytic performance and carbon deposition was also investigated. This mesoporous composite oxide is shown to be a promising catalyst support. An increase in the catalytic activity and stability of methane and carbon dioxide reforming reaction was resulted from the zirconia addition, especially at 5wt% ZrO2 content. The Ni catalyst supported ZrO2-Al2O3 has a strong resistance to sintering and the carbon deposition in a relatively long-term reaction.     

混凝法处理表面活性剂废水的水力影响

以含1 mg/L十二烷基苯磺酸钠(SDBS)的20 NTU高岭土悬浊液为研究对象,投加聚合铝PAC进行强化混凝实验,探讨了水力条件对含SDBS废水处理效果及其混凝形态学特性的影响。结果表明,偏碱性条件有利于浊度去除,而偏酸性条件下SDBS去除率较高;在试验确定的最佳工艺条件下,处理后废水余浊低,表面活性剂去除率较高,絮体大而密实,不易破碎,分维值较高;助凝剂纳米SiO2能进一步改善最优水力条件下PAC的强化混凝效果。