A new process to improve short-chain fatty acids and bio-methane generation from waste activated sludge

As an important intermediate product, short-chain fatty acids(SCFAs) can be generated after hydrolysis and acidification from waste activated sludge, and then can be transformed to methane during anaerobic digestion process. In order to obtain more SCFA and methane,most studies in literatures were centered on enhancing the hydrolysis of sludge anaerobic digestion which was proved as un-efficient. Though the alkaline pretreatment in our previous study increased both the hydrolysis and acidification processes, it had a vast chemical cost which was considered uneconomical. In this paper, a low energy consumption pretreatment method, i.e. enhanced the whole three stages of the anaerobic fermentation processes at the same time, was reported, by which hydrolysis and acidification were both enhanced, and the SCFA and methane generation can be significantly improved with a small quantity of chemical input. Firstly, the effect of different pretreated temperatures and pretreatment time on sludge hydrolyzation was compared. It was found that sludge pretreated at 100°C for 60 min can achieve the maximal hydrolyzation. Further, effects of different initial p Hs on acidification of the thermal pretreated sludge were investigated and the highest SCFA was observed at initial p H 9.0with fermentation time of 6 d, the production of which was 348.63 mg COD/g VSS(6.8 times higher than the blank test) and the acetic acid was dominant acid. Then, the mechanisms for this new pretreatment significantly improving SCFA production were discussed. Finally,the effect of this low energy consumption pretreatment on methane generation was investigated.     

Reversibility of the structure and dewaterability of anaerobic digested sludge

The reversibility of the structure and dewaterability of broken anaerobic digested sludge(ADS)is important to ensure the efficiency of sludge treatment or management processes.This study investigated the effect of continuous strong shear(CSS)and multipulse shear(MPS)on the zeta potential,size(median size,d_(50)),mass fractal dimension(D_F),and capillary suction time(CST)of ADS aggregates.Moreover,the self-regrowth(SR)of broken ADS aggregates during slow mixing was also analyzed.The results show that raw ADS with d_(50) of 56.5μm was insensitive to CSS–SR or MPS–SR,though the size slightly decreased after the breakage phase.For conditioned ADS with d_(50) larger than 600μm,the breakage in small-scale surface erosion changed to large-scale fragmentation as the CSS strength increased.In most cases,after CSS or MPS,the broken ADS had a relatively more compact structure than before and d_(50) is at least 200μm.The CST of the broken fragments from optimally dosed ADS increased,whereas that corresponding to overdosed ADS decreased.MPS treatment resulted in larger and more compact broken ADS fragments with a lower CST value than CSS.During the subsequent slow mixing,the broken ADS aggregates did not recover their charge,size,and dewaterability to the initial values before breakage.In addition,less than 15%self-regrowth in terms of percentage of the regrowth factor was observed in broken ADS after CSS at average velocity gradient no less than 1905.6 sec~(-1).     

O_3-脱硫灰-FeCl_3联合调理对污泥脱水性能的影响

以毛细吸水时间(CST)和滤饼含水率(Wc)为指标,探究O_3-脱硫灰-FeCl3联合调理对污泥脱水性能的影响。通过测定污泥各层胞外聚合物(EPS)含量、可溶性化学需氧量(SCOD)、Zeta电位以及红外光谱(FTIR),探讨了O_3、脱硫灰和FeCl_3调理污泥的作用机理。结果表明:O3-脱硫灰-FeCl_3联合调理污泥的效果明显好于O_3单独调理。SCOD和FTIR分析表明:部分EPS氧化分解为氨基酸、脂肪酸等小分子有机物或无机物,释放了部分表面吸附水和内部结合水。O_3能促进紧密粘附的胞外聚合物(TB-EPS)剥落;剥落的TB-EPS,部分转化为溶解性胞外聚合物(S-EPS)和松散粘附层胞外聚合物(LB-EPS),部分被Fe(OH)_3吸附。当O_3、脱硫灰和FeCl3投加量分别为85.72mg/g(DS)、400mg/g(DS)和60mg/g(DS)时,CST和Wc分别由1239.5s和83.69%降至204.3s和70.70%,脱水速度提高83.52%,脱水程度提高15.41%。     

污泥干化协同焚烧的环境影响实例研究

发达国家污泥处置领域的主流工艺干化焚烧技术在中国的实践性较低,目前只有3%的市场占有率。究其原因,固然有技术、经济、国情的不同,人们对污泥干化焚烧产生二次污染的担忧造成的反建反烧的社会舆论也是阻碍垃圾焚烧工艺推广的重要原因。以苏州园区污泥干化焚烧项目为实例,从环境效益和环境排放两个方面展开论述,将环境排放分为干化和焚烧两个过程,从水、气、固和职业健康4方面研究干化焚烧过程造成的环境影响,并从中总结经验,为污泥干化协同焚烧项目的建设提供科学依据。     

江苏省电镀污泥产生现状及预测分析

分析了江苏省及各省辖市电镀污泥产生现状,并对电镀污泥产量进行了预测。通过调研分析发现江苏省电镀污泥产生情况呈现地区分布不均、产生规模小和行业集中的特点。利用灰色模型对全省及重点地区产生量进行预测发现,全省未来6年电镀污泥产生量增长率为8.32%,到2020年将达到23.94万t,低于2014年江苏省电镀污泥核准处置量39.92万t。     

城市污水处理厂厌氧消化污泥调理脱水性能研究

通过在污水厂实地取样,首先用阳离子聚丙烯酰胺(cationic polyacrylamide,CPAM)调理储泥池混合污泥与消化污泥,比较2种污泥投药前后的毛细吸水时间(capillary suction time,CST),发现消化污泥的CST明显小于储泥池的污泥。然后,检测这2种污泥的调理过程中Zeta电位的变化,并研究了挥发性悬浮物(volatile suspended solids,VSS)、总悬浮固体(total suspended solid,TSS)蛋白质、多糖以及胞外聚合物(extracellular polymeric substances,EPS)总量对脱水效果的影响。结果表明投药后消化污泥脱水性能优于混合污泥,最佳投药量为4‰~4.5‰;污泥中VSS/TSS越高,污泥脱水效果越差;污泥中蛋白质含量是影响污泥脱水效果的重要因素之一,其含量低于26.5%时,污泥压滤后含水率随蛋白质含量升高而升高,但当蛋白质含量高于26.5%时,无明显变化规律。     

徐州市尾水导流信息化监测平台的设计与应用研究

南水北调徐州市截污导流工程是保障江苏省南水北调出省水质达到Ⅲ类水标准的关键性工程.徐州市尾水导流信息化监测平台,基于地理信息系统,集数据采集与传输、实时监测、历史数据分析、视频监控、预警预报于一体,对工程现场的各种类型的监测数据和工况信息进行采集、分析和展示应用,是南水北调徐州市截污导流工程实现全面信息化管理的重要技术支撑,为东线水资源安全提供有力保障.     

基于能源利用的市政污泥处置技术的发展研究

市政污泥是污水生物处理过程中产生的城市固废,产量巨大、污染严重."十三五"期间中国污泥无害化处理任务艰巨,常规的污泥处理处置在二次污染、占地、能耗等方面具有局限,影响了在中国的广泛应用.污泥的能源化利用是兼具污泥量削减和新附加值产生的发展方向,本文围绕当前市政污泥能源化的研究、应用领域的发展加以讨论,探讨了污泥能源利用的潜能和存在的主要问题.     

航空发动机涡轮叶片热障涂层冲蚀试验装置的研制

目的通过研制热障涂层冲蚀服役环境的模拟装置,来研究冲蚀失效机制。方法通过研制模拟热障涂层高温热冲击的燃气喷枪,在喷枪中设计速度、流量可控的颗粒送料系统,同时在装置中集成裂纹演化实时检测的声发射系统。结果该系统实现了热障涂层冲蚀服役环境的模拟,温度场、裂纹演化损伤参量的同步采集、输出与显示,从而完成了冲蚀服役环境模拟与关键损伤参量实时检测的一体化设计。结论装置能完成热障涂层常温、高温等各种服役温度、各种冲蚀角度、各种冲蚀速度等条件下的模拟试验,并提供较为系统的损伤参量检测数据,为理解热障涂层的冲蚀机理、优化其设计制备提供有效的试验数据。     

Efficient treatment of azo dye containing wastewater in a hybrid acidogenic bioreactor stimulated by biocatalyzed electrolysis

In this study, a novel scaled-up hybrid acidogenic bioreactor(HAB) was designed and adopted to evaluate the performance of azo dye(acid red G, ARG) containing wastewater treatment. Principally, HAB is an acidogenic bioreactor coupled with a biocatalyzed electrolysis module. The effects of hydraulic retention time(HRT) and ARG loading rate on the performance of HAB were investigated. In addition, the influent was switched from synthetic wastewater to domestic wastewater to examine the key parameters for the application of HAB. The results showed that the introduction of the biocatalyzed electrolysis module could enhance anoxic decolorization and COD(chemical oxygen demand) removal. The combined process of HAB-CASS presented superior performance compared to a control system without biocatalyzed electrolysis(AB-CASS). When the influent was switched to domestic wastewater, with an environment having more balanced nutrients and diverse organic matters, the ARG, COD and nitrogen removal efficiencies of HAB-CASS were further improved, reaching 73.3% ± 2.5%, 86.2% ± 3.8% and 93.5% ± 1.6% at HRT of 6 hr, respectively, which were much higher than those of AB-CASS(61.1% ± 4.7%,75.4% ± 5.0% and 82.1% ± 2.1%, respectively). Moreover, larger TCV/TV(total cathode volume/total volume) for HAB led to higher current and ARG removal. The ARG removal efficiency and current at TCV/TV of 0.15 were 39.2% ± 3.7% and 28.30 ± 1.48 m A,respectively. They were significantly increased to 62.1% ± 2.0% and 34.55 ± 0.83 m A at TCV/TV of 0.25. These results show that HAB system could be used to effectively treat real wastewater.