H2O2胁同三维电极法处理罗丹明B废水的研究

为了了解过氧化氢与三维电极的协同作用,以罗丹明B模拟废水进行了实验研究,探索了填料配比、外加电压、过氧化氢投加量、初始废水pH值、染料初始浓度等单因子对降解罗丹明B的影响,并通过正交试验研究各因素对该法处理罗丹明B模拟废水的效应.结果表明,过氧化氢与三维电极在处理罗丹明B模拟废水时具有明显的协同作用;外加电压=20v,...     

高架道路交通噪声动态模拟

为研究高架道路噪声的分布规律,结合微观交通仿真、车辆噪声排放和传播原理,对高架道路交通噪声进行动态模拟.该方法能得到逐秒变化的实时声压级.能反映交通噪声随时间的动态变化,且方便应用多项指标评估.研究表明:等效声级和累计声级的误差达到±2 dB;高架道路两端的防撞护栏在离道路边缘32m的垂直面上的声压衰减影响到10m左右...     

氟化铵制备氟化钙最优条件研究

试验采用氟化铵与石灰石粉、石灰乳反应制取氟化钙,研究了反应温度、物料浓度、物料过量系数等各主要参数变化对氟化钙结晶、过滤速度、氟收率及其含量的影响,摸索出最优反应条件。     

Improvement of welding heat source models for TIG-MIG hybrid welding process

Tungsten inert gas-metal inert gas (TIG-MIG) hybrid welding process is an effective way to improve welding productivity and quality due to advantages of the two processes. Mathematical analysis is crucial to fundamentally understand this synergetic welding process. In this study, based on experimental visualization of arc behaviors, some assumptions are proposed to deduce adaptive plane and volumetric heat source models separately for each involved welding method first. The influence of torch angles on distribution of temperature and geometry of weld bead are calculated and compared with experimental results. It shows that this developed algorithm of heat source can be employed to accurately predict welding process whether the electrode gun is slanted backward or forward to the direction of welding. Then TIG-MIG hybrid welding process is simulated and analyzed without considering the attractive or repulsive force of two arcs. The characteristic of TIG-MIG welding process is discussed compared to single MIG. It lays the foundation for the further research on the interaction of the two arcs during TIG-MIG hybrid welding.     

Warm forming die design,Part II: Parting surface temperature response characterization of a novel thermal finite element modeling code

The majority of the research activities in the area of warm forming are concentrated on demonstrating or simulating the improved formability associated with forming lightweight materials such as aluminum alloys at elevated temperatures. However, the ability to design the proper thermal management system within the forming tool is a critical aspect to delivering this technology as a viable, stable production alternative to traditional stamping. This work begins to address the thermal stability issues of this process by examining the impact of process cycle time on the parting surface temperature response. Cycle times of 10, 15, 30, and 300 s were evaluated using a reciprocating surface and a self-heated experimental block of 1020 steel fitted with resistance cartridge heaters. The presented results indicate that cycle time does not significantly impact the steady-state temperature response at the parting surface for a well-insulated die that has proper thermal management. Parting surface experimental results were compared to values obtained numerically and through the use of the novel thermal finite element analysis software PASSAGE/Forming^®.     

储油罐区防火堤受力情况分析

利用ANSYS有限元分析软件,对防火堤受液态物质冲击时受力状况进行模拟,并对防火堤在冲击载荷下的受力情况进行了分析,指出防火堤在事故状态下的脆弱部分,对油库的安全设计、评价和日常维护具有参考价值。     

铀尾矿库尾矿砂大气污染的控制研究

铀尾矿库运行期间,裸露的尾矿以扬尘形式对周边地区造成环境污染和辐射危害.因此,本文以平地型铀尾矿库为对象,应用CFD技术,探讨滩面形状(弧形、棱形和锥形)对减轻或控制运行期间尾矿库滩面颗粒物的大气迁移和环境污染的作用.结果表明,常年主导风速V=1.0m·s-1条件下,以1 mg·m-3的浓度为抑尘标准时弧形滩面抑尘效果最为明显,棱形滩面和锥形滩面抑尘效果较差.通过对不同风速下几种滩面形状防护效果的分析对比发现,小风速(V=0.5 m·s-1)下3种滩面形式辐射防护均效果良好,但随风速的增大效果逐渐减弱;弧形滩面条件下综合防护效果最佳.     

东亚大气可吸入颗粒物时空分布的数值模拟研究

利用嵌套网格空气质量模式(Nested Air Quality Prediction Model System,NAQPMS)模拟研究了2010年东亚地区可吸入颗粒物(PM10)的时空演变,并初步评估了其对人群健康的危险度.结果表明,NAQPMS模式能够合理地反映东亚地区PM10的时空分布,不同季节观测值和模拟值的总体相关系数达到0.65~0.85.2010年东亚PM10的地面浓度高值区(100μg·m-3)出现在我国华北、华中和内蒙古中西部等地区.其中,无机盐(硫酸盐、硝酸盐和铵盐)对我国东部PM10的贡献最大(10~70μg·m-3,20%~50%);一次PM10次之(5~50μg·m-3,10%~30%),有机物(5~30μg·m-3,10%~20%)和黑炭(3~20μg·m-3,3%~5%)紧随其后.PM10可以引起我国东部人群急性总死亡率增加2%~5%,对我国居民的健康水平构成了一定威胁.     

基于功能仿真的电子产品性能退化分析方法

目的研究基于功能仿真对电子产品长期工作过程中性能退化问题进行分析的方法。方法以DC-DC电源模块为对象,一种方式是直接对电源模块进行加速退化试验,并基于试验数据进行可靠性分析;另一种方式是对电源模块中性能退化关键元器件进行加速退化试验,并将试验数据模型注入到电源模块功能仿真模型中,进行性能退化仿真与可靠性分析,最终对两种分析结果进行对比,验证仿真分析技术的有效性。结果对比显示,加速退化试验分析得到的电源模块平均寿命为281 560 h,仿真分析得到的电源模块平均寿命为357 290 h。结论由于仿真分析方法只考虑了性能退化的关键元器件,结果偏乐观,但是偏差在合理的范围内,证明该方法对于性能退化可靠性分析是有效的,并且应用该方法更便于进行设计改进和迭代分析。     

柠檬酸对砷污染土壤的萃取优化条件实验研究

论文以新邱矿矸石山排土场土壤为研究对象,以去离子水做空白试验,选取尿素、十二烷基磺酸钠、碳酸氢钠、醋酸、柠檬酸等12种化学试剂做了萃取剂初选试验;并以柠檬酸为萃取剂进行了三因素三水平L9(33)正交实验。实验结果表明:柠檬酸和氢氧化钠可作为砷污染土壤的萃取剂,具有良好的萃取效果。柠檬酸作为砷污染土壤萃取剂的最优化条件是液土比为10mL/g,萃取时间为12h,萃取剂浓度为0.1mol/L。实验结果可为砷污染土壤的治理提供参考。