迎接地震观测技术的新变革

回顾了地震观测技术发展的三个阶段及其特点。简要总结了随着这几个阶段的技术进步南京基准地震台观测技术的重要变革 ,并从记录地震事件数量、大地震速报作用和推动某些研究的深入等方面评估了由于这些技术进步所带来的地震台效能的提高。对目前地震观测技术从模拟观测向数字观测的转折时期 ,地震台如何尽快过渡 ,充分发挥效能提出了初步对策。     

人为泥石流起动及产沙放水冲刷实验——以神府-东胜矿区为例

神府东胜矿区位于黄土高原北部干旱半旱过度地带。由于煤田的大量开采,诱发了大量的环境问题,尤以人为泥石流最为严重,本文以神府－东胜矿区人为泥石流为研究对象,采用人工放水冲刷模拟的方法,分析了坡面型和沟谷型泥石流源地松散体起动、产沙、泥石流过程的特性,所得结论为：（１）放水历时长,强度大,有利于泥石流的形成;（２）弃土石渣起动,是该区泥石流固体物质的主体;（３）沟道型泥石流放水冲刷模拟实验,便于观测石     

柴油机冷起动辅助措施的匹配优化试验研究

重点论述了柴油机冷启动辅助装置燃油加热器的选型试验。对燃油加热器优劣的评价指标进行了分析研究,提出了燃油加热器的评价方法。最后通过样本CFD分析,优化了燃油加热器与发动机之间水路系统的匹配,实际效果进行了试验验证。     

雷达关键部件对西北地区典型环境适应性的综合仿真研究

长期工作在西北地区大温差、多风砂和强紫外线等恶劣复杂环境下的雷达装备表面极易出现表面磨蚀或损坏。建立了雷达对西北地区综合环境适应性的仿真分析方法,以计算流体动力学(CFD)软件FLUENT为平台,对雷达典型部件在大温差、多风砂和强紫外线环境中的表面状态进行仿真模拟。仿真结果与雷达装备实际情况较为吻合,为进一步深入研究相关物理机理以及设计防护措施提供了理论依据。     

Comparative study on performances of a heat-pipe PV/T system and a heat-pipe solar water heating system

The heat-pipe solar water heating (HP-SWH) system and the heat-pipe photovoltaic/thermal (HP-PV/T) system are two practical solar systems, both of which use heat pipes to transfer heat. By selecting appropriate working fluid of the heat-pipes, these systems can be used in the cold region without being frozen. However, performances of these two solar systems are different because the HP-PV/T system can simultaneously provide electricity and heat, whereas the HP-SWH system provides heat only. In order to understand these two systems, this work presents a mathematical model for each system to study their one-day and annual performances. One-day simulation results showed that the HP-SWH system obtained more thermal energy and total energy than the HP-PV/T system while the HP-PV/T system achieved higher exergy efficiency than the HP-SWH system. Annual simulation results indicated that the HP-SWH system can heat the water to the available temperature (45°C) solely by solar energy for more than 121 days per year in typical climate regions of China, Hong Kong, Lhasa, and Beijing, while the HP-PV/T system can only work for not more than 102 days. The HP-PV/T system, however, can provide an additional electricity output of 73.019 kWh/m², 129.472 kWh/m², and 90.309 kWh/m² per unit collector area in the three regions, respectively.     

洪泛区林地的开发对鱼类栖息地面积的影响模拟

洪泛区的开发利用,必然会导致洪泛区林地糙率的改变。河漫滩也是河流洪泛区的一部分。洪泛区糙率的减小,会使河水流速增大,从而减小鱼类可用栖息地面积。因此,在洪水发生时,为了给鱼类提供避险场所,保护有效栖息地面积,需研究洪泛区林地的开发对鱼类的影响。利用River 2D软件模拟在一定频率的洪水条件下,不同的河漫滩糙率对应的鱼类栖息地加权可用面积(WUA),分析了糙率的改变对河流鱼类栖息地的影响。结果表明:随着河漫滩糙率的降低,加权可用面积(WUA)逐渐减小,河漫滩范围内WUA的变化幅度比较大,河漫滩的特性对鱼类栖息地面积的影响很大。洪泛区植被的砍伐,会使鱼类栖息地面积减小。因此,应防止洪泛区的过度开发,保护河流生态环境。     

Economic and environmental value stream map (E2VSM) simulation for multi-product manufacturing systems

Value stream mapping (VSM) is a well-accepted tool within lean manufacturing concept which is often used for analysing and designing the flow of materials and information required to manufacture a product. However, the analysis is static and single product oriented, which fails to cope with either the variation of production plan or a multi-product environment. In addition, the environmental impact of a manufacturing system is highly associated with the dynamic consumption of energy and resources. Despite the recent integration of VSM with simulation or environmental studies (in the domain of energy efficiency), still neglected is the dynamic assessment of all the resources involved in a multi-product production environment. This paper presents a methodology for modelling multi-product manufacturing systems with dynamic material, energy and information flows with the aim to generate economic and environmental value stream maps (E²VSM). The proposed methodology is validated with an industrial case.     

餐厨垃圾高温厌氧消化产沼气的试验研究

探究了温度、含固率、pH及接种率对餐厨垃圾厌氧消化产沼量的影响,并设计L9(34)正交试验进行厌氧发酵工艺优化研究。结果表明,在温度为55℃、含固率为8%(质量分数)、pH为7.00、接种率为90%(质量分数)时,厌氧发酵累积产沼量为809.0mL/g(以挥发性固体计);各影响因素对产沼量的影响大小为温度pH接种率含固率。     

某典型化工污染场地土壤修复方案研究

以典型化工污染场地为研究对象,构建适合该场地的修复技术筛选体系,筛选最佳修复方法。根据特征污染筛选结果、场地修复目标及业主需求等因素,通过室内模拟实验、施工现场微调等方法,确定污染场地最优修复方案。结果表明,作为Cd、苯并[a]芘复合污染场地,根据筛选体系结合Topsis法进行评估,确定场地修复技术为异位化学淋洗。运用响应曲面法,采用BoxBehnken设计多因素实验进行室内模拟,确定最佳修复条件。采用0.6mol/L柠檬酸与20g/Lβ-环糊精进行复配的淋洗剂,在pH=3.0、淋洗温度35.00℃、液固比(淋洗剂与土壤的体积质量比)6.00mL/g、搅拌强度320.00r/min下,淋洗4次,每次淋洗3.4h,对某化工污染场地进行修复,修复后土壤中Cd、苯并[a]芘的去除量分别为69.88、39.20mg/kg,去除率分别达80.14%、70.50%,达到预期修复目标。     

SCR脱硝系统烟道内流场优化

为了改善选择性催化还原法(SCR)催化剂上游烟气的流场、温度场和浓度场分布,基于CFD仿真分析技术,建立了整个脱硝系统三维模型,并通过优化导流板及整流格栅,使得速度标准偏差、浓度标准偏差、温度偏差、速度偏转角以及压降等性能指标都满足设计要求,在满足脱硝效率和氨逃逸率前提下,大大降低了烟气对催化剂层的冲刷,保证催化剂的使用寿命。最后,为了合理布置吹灰器,对优化结构下粉尘颗粒在烟道内的运动情况进行了仿真分析研究,为设计提供了依据。