在线自动监测仪与实验室国标方法测定地表水中总氮的比对分析

随着监测技术的发展,地表水中越来越多的污染物可采用自动监测仪器实现实时监测。采用自动监测与实验室国标方法测定地表水中总氮的结果是否可比以及造成差异的原因,文章根据实际样品比对实验对此进行了探讨。     

Study on the effect of porous fence on air quality and traffic noise level around a double-decked road structure

Fence for traffic noise control sometimes causes adverse effect on air pollution. Thus in this study, performance of porous fence as a tool for control of both air pollution and noise pollution was evaluated. A two-dimensional numerical model for flow and pollutant concentration and an analytical model for traffic noise were utilized in the analysis of a double-decked road structure with fences only at ground (Case 1) and at both ground and upper deck (Case 2). Porous fences were assumed only at the ground level since the solid fences at the upper deck usually leads to desirable result on air pollution. Effects of the variable porosity on air quality and noise level near road were evaluated. Obtained results showed: (1) flow pattern in leeward of fence was drastically changed at 40–50% porosity in Case 1 and 50% in Case 2. The porosity larger than 40% excluded presence of a circulation behind the fence. (2) Effect of porous fence on air pollution was different in Cases 1 and 2. In Case 1, the porous fence generally resulted in the reduction of air pollution at the ground level; on the other hand, in Case 2, it rather led to increase of the concentration. (3) Traffic noise level was also largely changed by the porosity of the fence; an example of simultaneous evaluation of the effects of porous fence on both air and noise pollution in Case 1 showed that the fence of 60% porosity leads to reduction of air pollution by 20% compared with solid fence case, and reduction of noise pollution by 4–6% in dB compared with no fence case, at l m high and 10 m from the road.     

ADMS模型解析城区总悬浮颗粒物来源

以污染源排放数据为基础,应用ADMS-城市扩散模型模拟分析了鞍山市尘各污染源对空气环境质量的贡献。结果表明,来自污染源的浓度贡献值占总量的52%;二次尘及外来尘浓度贡献占48%;矿山开采二次尘的浓度贡献占16%;鞍钢炼铁厂的浓度贡献占19.6%;鞍钢化工总厂浓度贡献占5.6%;供暖锅炉浓度贡献占9.3%。低、中、高架源浓度贡献百分比分别为68.1%、29.0%、2.9%。低架源吨排放量浓度贡献为高架源的2.4倍。     

德兴地区超大型铜、金矿床成矿控制因素及其模拟实验

在深入研究德兴地区超大型铜、金矿成矿地质背景的基础上 ,从构造地球化学方面着重研究德兴地区超大型铜、金矿床成矿的控制因素 ,并进行构造控矿模拟实验。研究结果表明 ,德兴地区超大型铜、金矿床的形成除因其处于特殊的构造位置 ,具有特殊的地质背景及成矿环境外 ,还与多种地质作用、多种控矿因素耦合作用及地质构造长期发展演化使成矿物质多次叠加富集密切相关     

金属体积成形过程有限元模拟中六面体网格重划技术的研究

针对金属体积成形过程有限元模拟中的网格重划问题 ,提出了基于边界构形的有限元网格重划技术 ,并对其中的一系列技术处理进行了详尽的讨论。将该技术应用于矩形块体镦粗过程的有限元模拟中 ,较好地解决了六面体网格重划问题。     

汕头港水域温排水热扩散的三维数值模拟

本文建立了汕头港水域温排水扩散的三维数学模型，并采用特征差分方法求其解，对该法在三维情况下的稳定作了推导，给出了判断公式，上述模型被应用于汕头热电厂废热水排放的环境影响评价中，实例计算表明，该模型算法程序简单，计算结果合理。     

Using chemical process simulation to design industrial ecosystems

Chemical process simulation (CPS) software has been widely used by chemical (process) engineers to design, test, optimise, and integrate process plants. It is expected that industrial ecologists to bring these same problem-solving benefits to the design and operation of industrial ecosystems can use CPS. This paper provides industrial ecology researchers and practitioners with an introduction to CPS and an overview of chemical engineering design principles. The paper highlights recent research showing that CPS can be used to model industrial ecosystems, and discusses the benefits of using CPS to address some of the technical challenges facing companies participating in an industrial ecosystem. CPS can be used to (i) quantitatively evaluate and compare the potential environmental and financial benefits of material and energy linkages; (ii) solve general design, retrofit, or operational problems; (iii) help to identify complex and often counter-intuitive solutions; and (iv) evaluate what-if scenarios. CPS should be a useful addition to the industrial ecology toolbox.     

新疆D矿田金矿资源定量评价

本文在建立D矿田找矿信息层次模型基础上,确定矿田统计单元划分和地质变量提取的赋值原则,将该矿田划分出466个统计单元,提取25个地质变量并进行二态赋值,而后应用数量化理论Ⅲ。特征分析法及勃尔法等方法,建立了矿田金矿资源定量评价模型,定位预测了45个勘探靶区。     

A Simulation of Temporal and Spatial Variations in Carbon at Landscape Level: A Case Study for Lake Abitibi Model Forest in Ontario,Canada

Using a case study of the Lake Abitibi Model Forest (LAMF), this study aims to assess the temporal and spatial variability in carbon storage during 1990–2000, and to present a comprehensive estimation of the carbon budget for LAMF's ecosystems. As well, it provided the information needed by local forest managers to develop ecological and carbon-based indicators and monitor the sustainability of forest ecosystems. Temporal and spatial carbon dynamics were simulated at the landscape level using ecosystem model TRIPLEX1.0 and Geographical Information System (GIS). The simulated net primary productivity (NPP) and carbon storage in forest biomass and soil were compared with field data and results from other studies for Canada's boreal forests. The results show that simulated NPP ranged from 3.26 to 3.34 tC ha⁻¹ yr⁻¹ in the 1990s and was consistent with the range measured during the Boreal Ecosystem-Atmosphere Studies (BOREAS) in central Canada. Modeled NPP was also compared with the estimation from remote sensing data. The density of total above-and belowground biomass was 125.3, 111.8, and 106.5 tC ha⁻¹ for black spruce, trembling aspen, and jack pine in the LAMF ecosystem, respectively. The total carbon density of forested land was estimated at 154.4 tC ha⁻¹ with the proportion of 4:6 for total biomass and soil. The analysis of net carbon balance of ecosystem suggested that the LAMF forest ecosystem was acting as a carbon sink with an allowable harvest in the 1990s.