Natural gas engine driven heat pump system – a case study of an office building

ABSTRACT

An eQUEST model was developed to conduct a simulation study of a natural gas engine-driven heat pump (GEHP) for an office building in Woodstock, Ontario, Canada. Prior to the installation of the GEHP, the heating and cooling demands of the office building were provided by rooftop units (RTUs), comprising of natural gas heater and electric air conditioner. Energy consumption for both GEHP and RTUs were monitored for operation in alternating months. These recorded energy consumptions along with weather data were used in the regression analysis. The developed eQUEST models were validated and calibrated with the regression analysis results with respect to the ASHRAE Guideline 14–2014. The eventual models were then applied to investigate the potential annual energy consumption, greenhouse gas (GHG) emission and energy cost savings achieved by using the GEHP in Woodstock, and other cities in Canada, particularly in Ontario.     

微好氧颗粒污泥工艺降解五氯酚的实验研究

微好氧颗粒污泥工艺能够同时进行好氧氧化和厌氧还原过程，是处理五氯酚（PCP）的理想方法。对影响好氧颗粒污泥降解PCP的因素水力学上升流速、碱加入量以及水力停留时间进行考察。结果表明，水力学上升流速为4.58m／h，进水NaHCO3浓度为900mg／L，水力停留时间为24h时，处理效果比较好。     

Reusability of sewage sludge in clay bricks

Bricks produced from sewage sludge in different compositions were investigated. Results of the tests indicated that the sludge proportion is a key factor in determining the brick quality. Increasing the sludge content results in a decrease in brick shrinkage, bulk density, and compressive strength. Brick weight loss on ignition was mainly due to the contribution of the contained organic matter from the sludge being burnt off during the firing process, as well as inorganic substances found in both clay and sludge. The physical, mechanical, and chemical properties of the bricks that were supplemented with various proportions of dried sludge from 10 to 40wt% and generally complied with the General Specification for Brick as per the Malaysian Standard MS 7.6:1972, which dictates the requirements for clay bricks used in walling in general. A standard leaching test method also showed that the leaching of metals from the bricks is very low.     

Pore structure and adsorption properties of activated carbon prepared from granular molded waste paper

We have previously manufactured activated carbon using waste paper board, which was prepared by adding 8% phenol resin adhesive to torn waste newspaper and hot-pressing. In this study, the pretreatment process of the raw material was simplified; the waste paper was extruded to form granules. The activated carbon was manufactured by the carbon dioxide activation method using the granules as the raw material. The properties of the activated carbon were evaluated based on the pore structure, the iodine adsorption number, and the adsorption of toluene vapor in a sealed chamber. The activated carbon, which was manufactured at an activation temperature of 1100°C and a treatment time of 60min, exhibited a specific surface area of 1241m²/g and an iodine adsorption number of 1120mg/g. These results were similar to those obtained for two commercially available activated carbons. The extent of toluene vapor adsorption by this activated carbon was similar to that observed for the two commercial activated carbons over a period of 130min.     

The composting potential of different organic solid wastes: experience from the island of Crete

For the past 20 years, the National Foundation for Agricultural Research in Crete and the School of Agricultural Technology of the Technological and Educational Institute of Crete have been involved in a number of research and development activities, related to the production and evaluation of compost derived from a variety of local solid, mainly agricultural organic wastes. Materials such as olive press cake, olive tree leaves (OTL) and branches, vine branches (VB), pressed grape skins (PGS), pig manure (PM), sewage sludge and the organic fraction of municipal solid waste (OFMSW) have been evaluated for their behaviour during composting, their compatibility in mixtures and the quality of the end product. The quality evaluation included both a detailed physiochemical (pH, electrical conductivity (EC), nutrients concentration, heavy metal concentration, etc.) and biological analyses (pathogenic microorganisms). It also included an agronomic evaluation, in which composts were used either as a soil amendment or as a component for substrates in open air or covered (greenhouse) cultivation mainly of local vegetables (tomatoes, cucumbers, etc.). All materials were composted successfully, especially when mixed. The end products contained large amounts of organic matter, usually combined with an increased EC value. Pressed grape skins should be considered as the ideal raw material, producing a high quality compost, with the lowest EC value (1.57 mS cm(-1)) and the largest organic matter concentration (84.50%), compared to all other materials. When any of the produced compost was used in a ratio of 30% by volume (v/v), it increased plant growth, whereas in larger volumes, it presented phytotoxic behaviour, inhibiting both root and shoot development.     

Response of Organic and Inorganic Carbon and Nitrogen to Long-Term Grazing of the Shortgrass Steppe

We investigated the influence of long-term (56 years) grazing on organic and inorganic carbon (C) and nitrogen (N) contents of the plant–soil system (to 90 cm depth) in shortgrass steppe of northeastern Colorado. Grazing treatments included continuous season-long (May–October) grazing by yearling heifers at heavy (60–75% utilization) and light (20–35% utilization) stocking rates, and nongrazed exclosures. The heavy stocking rate resulted in a plant community that was dominated (75% of biomass production) by the C₄ grass blue grama (Bouteloua gracilis), whereas excluding livestock grazing increased the production of C₃ grasses and prickly pear cactus (Opuntia polycantha). Soil organic C (SOC) and organic N were not significantly different between the light grazing and nongrazed treatments, whereas the heavy grazing treatment was 7.5 Mg ha^–1 higher in SOC than the nongrazed treatment. Lower ratios of net mineralized N to total organic N in both grazed compared to nongrazed treatments suggest that long-term grazing decreased the readily mineralizable fraction of soil organic matter. Heavy grazing affected soil inorganic C (SIC) more than the SOC. The heavy grazing treatment was 23.8 Mg ha^–1 higher in total soil C (0–90 cm) than the nongrazed treatment, with 68% (16.3 Mg ha^–1) attributable to higher SIC, and 32% (7.5 Mg ha^–1) to higher SOC. These results emphasize the importance in semiarid and arid ecosystems of including inorganic C in assessments of the mass and distribution of plant–soil C and in evaluations of the impacts of grazing management on C sequestration.     

东涌工业污水处理站污泥处置方法的研究和探讨

本文通过番禺区东涌工业污水处理站污泥特性和污泥堆肥技术的研究,提出了污泥堆肥的可行性,并用之于实践,变废为宝,解决了污泥的处置问题.     

川中丘陵区村级景观土壤有机碳密度和储量分析

本文综合运用了地理信息系统(GIS)、遥感(RS)和全球卫星定位系统(GPS)等技术手段,分析了人口密集的川中丘陵乡村区域土壤有机碳密度(SOCD)和储量(SOCS)的空间分布及影响因素。结果表明,区域内SOCD和SOCS平均值分别为5.58kg/m2和75.77×105g,SOCD随丘体高度的降低向四周逐渐增大,SOCS主要分布于旱地、水田等土地利用类型中。0~30cm土层和土体深度内,SOCD以冬水田最高,裸岩最低;SOCS则以丘脚旱地和轮作水田最高,裸岩最低。地形、土地利用和土地覆盖对SOCD、SOCS影响明显。     

污水处理磷回收的研究进展

磷矿数量减少与含磷污水造成的水体富营养化问题对磷资源的可持续利用提出了迫切要求。从污水处理的不同环节回收磷并重新利用,是实现磷资源循环利用的有效途径。本文讨论了国内外磷回收技术的研究进展和应用实例,包括从含磷污泥和富磷污水中回收磷的工艺,并对磷回收的技术经济性进行了分析。     

对铁碳处理硝基酚废水的研究

铁碳降解水中难降解有机污染物的影响因素、最佳工艺参数及处理效果;初步探讨了氧化降解污染物的作用机理;通过分析污染物降解的中间产物,提出了污染物降解的可能途径.探讨了pH、铁碳用量、温度以及锰矿物的粒径等对处理效果的影响,在最佳的工艺条件下,CODCr的去除率达到95%以上,TOC测定表明：大部分硝基酚被氧化降解为H2O和CO2.对硝基酚的降解途径主要是微电解将对硝基酚还原为对氨基酚,对氨基酚在酸性条件下被软锰矿氧化为H2O和CO2做探索性研究.