Assisting Australian indigenous resource management and sustainable utilization of species through the use of GIS and environmental modeling techniques

Information on distribution and relative abundance of species is integral to sustainable management, especially if they are to be harvested for subsistence or commerce. In northern Australia, natural landscapes are vast, centers of population few, access is difficult, and Aboriginal resource centers and communities have limited funds and infrastructure. Consequently defining distribution and relative abundance by comprehensive ground survey is difficult and expensive. This highlights the need for simple, cheap, automated methodologies to predict the distribution of species in use, or having potential for use, in commercial enterprise. The technique applied here uses a Geographic Information System (GIS) to make predictions of probability of occurrence using an inductive modeling technique based on Bayes' theorem. The study area is in the Maningrida region, central Arnhem Land, in the Northern Territory, Australia. The species examined, Cycas arnhemica and Brachychiton diversifolius, are currently being 'wild harvested' in commercial trials, involving sale of decorative plants and use as carving wood, respectively. This study involved limited and relatively simple ground surveys requiring approximately 7 days of effort for each species. The overall model performance was evaluated using Cohen's kappa statistics. The predictive ability of the model for C. arnhemica was classified as moderate and for B. diversifolius as fair. The difference in model performance can be attributed to the pattern of distribution of these species. C. arnhemica tends to occur in a clumped distribution due to relatively short distance dispersal of its large seeds and vegetative growth from long-lived rhizomes, while B. diversifolius seeds are smaller and more widely dispersed across the landscape. The output from analysis predicts trends in species distribution that are consistent with independent on-site sampling for each species and therefore should prove useful in gauging the extent of resource availability. However, some caution needs to be applied as the models tend to over predict presence which is a function of distribution patterns and of other variables operating in the landscape such as fire histories which were not included in the model due to limited availability of data.     

Relationships between anaerobic consortia and removal efficiencies in an UASB reactor degrading 2,4 dichlorophenol (DCP)

To gain more insight into the interactions between anaerobic bacteria and reactor performances (chemical oxygen demand-COD, 2,4 dichlorophenol-2,4 DCP removals, volatile fatty acid-VFA, and methane gas productions) and how they depended on operational conditions the microbial variations in the anaerobic granular sludge from an upflow anaerobic sludge blanket (UASB) reactor treating 2,4 DCP was studied. The study was composed of two parts. In the first part, the numbers of methanogens and acedogens in the anaerobic granular sludge were counted at different COD removal efficiencies. The relationships between the numbers of methanogens, the methane gas production and VFA production were investigated. The COD removal efficiencies increased to 74% from 30% while the number of total acedogens decreased to 10 from 30 cfu ml(-1). The number of total methanogens and acedogens varied between 11 x 10(3) and 10 x 10(9)MPN g(-1) and 10 and 30 cfu ml(-1) as the 2,4 DCP removal efficiencies were obtained between 60% and 99%, respectively. It was seen that, as the number of total acedogens decreased, the COD removal efficiencies increased. However, the number of total methanogens increased as the COD removal efficiencies increased. Correlations between the bacterial number and with the removal efficiencies obtained in different operational conditions were investigated. From the results presented in this paper a high correlation between the number of bacteria, COD removals, methane gas percentage, 2,4 DCP removals and VFA was observed. In the second part, methanogen bacteria in the anaerobic granular sludge were identified. Microbial observations and biochemical tests were applied to identify the anaerobic microorganisms from the anaerobic granular sludge. In the reactor treating 2,4 DCP, Methanobacterium bryantii, Methanobacterium formicicum, Methanobrevibacter smithii, Methanococcus voltae, Methanosarcina mazei, Methanosarcina acetivorans, Methanogenium bourgense and Methanospirillum hungatei were identified.     

垃圾焚烧飞灰处置与资源化利用研究进展

随着生活垃圾焚烧处理方式的不断推广,焚烧飞灰的产生量也不断增加。按照我国固体废物分类方法,焚烧飞灰属于危险废物,必须进一步处置才能进入填埋场或资源化利用。本文分析了飞灰物理化学特性,论述了常规处置技术（水泥固化、化学药剂稳定化、酸溶剂提取和熔融固化等）存在的问题。将原始飞灰直接应用于水泥、混凝土或路基材料,飞灰中高含量的重金属和盐类会产生新的环境问题。飞灰水洗可以高效去除其中的可溶性盐类,水洗飞灰在焙烧后重金属的浸出浓度远低于原始飞灰烧结后的相应浓度,飞灰水洗-焙烧技术具有很好的应用前景。     

Co-combustion of dried sewage sludge and coal in a pulverized coal boiler

More than 1.1 million tons of municipal and industrial sewage sludge is produced annually in Poland. Most of this sewage sludge is landfilled or used for recultivation and fertilization of soil. After accession of Poland to the EU, large investments are planned for wastewater treatment, so it is expected that the amount of sewage sludge produced in Poland will grow in the near future. It is well known that the combustion of sewage sludge is becoming a more and more popular utilization method of such waste. Unfortunately, the current situation in Poland makes it impossible to incinerate the sewage sludge because of a lack of incinerators. One possible solution for Poland is the co-firing of dried sewage sludge in existing coal-fired utility boilers. This article presents results of initial Polish industrial trials of dried municipal sewage sludge and hard coal co-combustion in an OP-230 pulverized coal boiler. Such a solution was shown to be technically viable and not to require changes to the existing technological system. Cocombustion of sewage sludge with coal in power plants seems to be the best solution for sludge utilization in the near future in Poland.     

土地一级开发环境影响评价初探

衔接土地利用规划和建设项目的土地一级开发伴随着土地政策的改革而出现。目前土地一级开发环境影响评价处于起步阶段,缺乏对这项工作系统的研究。本文结合工作中的实践经验,从土地一级开发环境影响评价实施的意义、作用和评价目的等方面对土地一级开发的环境影响评价进行了论述,分析了其环境影响评价存在的问题,总结了土地一级开发环境影响评价的技术要点,并对完善土地一级开发环境影响评价制度提出建议。     

污水厂污泥一体化竖式强化渗滤浓缩自然干化与消化研究

针对目前国内污泥处理处置存在的问题,为实现污泥浓缩消化一体化,开发了污泥一体化强化渗滤浓缩自然干化与消化新工艺反应器,并进行了城市水厂污泥处理试验.结果表明,在有机负荷为0.8 kg VSS/(m3·d)、平均水力停留时间为8.3 d、污泥停留时间为120 d的条件下,污泥有机物去除率可达到44.4%,排泥含水率达到79.1%,污泥消化与浓缩过程起到了相互促进的作用.渗滤液须抽回至污水处理厂处理.     

苏州污水处理厂污泥干化工艺方案的比选

污泥处理及其处置所面临的重要问题之一,就是如何对城市污水处理厂产生的污泥进行有效减容,尽量降低对外部能源的需求。文中在掌握国内外污泥干化主要工艺技术的基础上,针对某城市污水处理厂的污泥干化工程,拟对采用燃煤烟气干燥、污泥消化一干化一体化、太阳能热泵干燥等三种不同污泥干化工艺进行物料、能量工艺核算。并在此基础上,计算初期投资与15年的运行费用总和。通过对燃料价格、环保和安全等影响因素的研究,分析比较了五种供热系统,以太阳能热泵供热系统为最优,值得大力推广和应用。     

污泥掺烧对燃煤电厂痕量元素排放特性影响

采用EPAMethod29方法、冷原子吸收光谱法和电感耦合等离子体质谱法采集和分析一台超低排放燃煤机组污泥掺烧前后的原燃料、烟气和副产物样品中各痕量元素浓度,研究污泥掺烧对燃煤电厂痕量元素排放特性的影响.结果表明:污泥中富含Zn、Cu元素,浓度分别是煤样中的18.81倍和17.64倍.污泥掺烧使掺配后入炉煤中痕量元素含量普遍升高.污泥掺烧前后整个系统、锅炉系统和全流程大气污染控制设施的痕量元素质量平衡率均在可接受范围内.污泥掺烧对痕量元素的分布特征无明显影响,随粉煤灰排放是痕量元素的主要排放去向.通过烟囱排放到大气环境的痕量元素排放量占比很小,不超过0.43%.污泥掺烧前后SCR入口烟气中痕量元素除Hg外主要以颗粒态形式存在.污泥掺烧后各痕量元素在粉煤灰和底渣中的相对富集系数未显著改变.经过全流程大气污染控制设施协同控制后,污泥掺烧前后烟囱总排口痕量元素排放浓度分别为0～12.76,0～14.97μg/m³.污泥掺烧后痕量元素排放浓度均满足美国燃煤发电机组有害大气污染物排放标准、上海市燃煤耦合污泥电厂大气污染排放标准和生态环境部生活垃圾焚烧污染控制标准的限值要求....     

pH值调控柠檬酸污泥厌氧发酵产酸及碳源潜力研究

以柠檬酸废水厌氧颗粒污泥为接种物,在不同pH值调控条件下开展柠檬酸生产废水剩余活性污泥厌氧发酵产酸研究.通过对发酵液挥发性脂肪酸(VFAs)、有机质、氮磷和污泥脱水性能的分析,探讨了柠檬酸污泥厌氧产酸机制.结果表明,pH≥10的碱性条件更有利于有机质的溶出从而促进VFAs的产生.三维荧光光谱分析发现在恒定pH值下腐殖酸(HA)和富里酸(FA)会大量溶出降低VFAs的产量.初始pH=10是柠檬酸污泥厌氧产酸的最佳p H值,发酵4d的VFAs浓度最高达(6681.47±126.82)mgCOD/L,是文献报道中市政污泥产酸量的近2倍,其中乙酸占比49.8%,发酵后产酸功能菌Chloroflexi、Bacteroidota的相对丰度分别由初始的9.52%、10.87%增至16.84%、14.39%,污泥归一化毛细吸水时间(nCST)为(11.34±0.27)s·L/g,脱水性能良好,发酵液TP浓度为(20.45±0.33) mg/L.研究表明,利用柠檬酸剩余活性污泥碱性厌氧发酵产酸作为污水处理过程中的外加碳源具有较大潜力.     

类水滑石对污泥焚烧飞灰浸出液中磷的纯化

采用Mg-Fe型类水滑石（LDH）吸附剂提纯污泥焚烧飞灰（ISSA）浸出液中的磷,探究了吸附剂煅烧对磷吸附效果的影响及磷吸附和脱附机理.研究发现,在高浓度磷溶液（>1000mg/L）中,未煅烧的类水滑石（LDHu）磷吸附容量高于煅烧后的类水滑石（LDHc）.LDHu具有典型的层状结构,磷的吸附与脱附主要通过磷和金属离子沉淀-溶解、静电吸附-排斥、配位作用和离子交换实现.而LDHc层状结构消失,形成双金属氧化物,不存在明显的阴离子交换作用.经LDHu或LDHc吸附和NaOH溶液脱附后,ISSA浸出液均具有良好的磷纯化效果,磷相对纯度从36%分别上升至77%和69%,磷回收率分别为84%和57%.纯化后的溶液适合制备高值含磷产物.