Comparisons and critical assessment of global and diffuse solar irradiation estimation methodologies

Defining better methodologies of accurate predictions of the amount of monthly mean daily global and diffuse solar irradiation exposed is of utmost importance in order to determine the potential for utilizing the solar energy. This study compares and discusses the main methodologies, databases, and software that are used in estimating the solar irradiation to be used for the short- and long-term performances and feasibilities of solar energy systems, especially photovoltaic power plants in Turkey, and addresses the best one to be used to make the most accurate estimations. The comparisons are carried out between the recent methodologies developed by the authors, some models taken from the related literature that are concluded to be better, a widely used database, namely Meteonorm, and a widely used software, namely EU PVGIS. The reference data to develop the methodologies and to make comparison are provided from the State Meteorological Service of Turkey, which is the responsible body in Turkey to make measurements of solar irradiation. The comparisons are based on monthly mean daily values of global and diffuse solar irradiation and are carried out by statistical errors: mean bias error and root mean square error. The results showed that the methodology developed by the authors has shown better performances in estimating the monthly mean daily global and diffuse solar irradiation amount for Turkey.     

An investigation of double-glass-covered trapezoidal salt-gradient solar pond coupled with reflector

In the present study, a trapezoidal salt-gradient solar pond (TSGSP) has been investigated experimentally. The top surface of solar pond has been covered with double-glass cover in order to reduce the evaporative and convective losses from the top. This results in increase of temperature even in the top zone of the solar pond and leads to more volume utilization for heat storage in the pond. A reflector made of aluminium sheet has been used to enhance the solar intensity on the solar pond during sunny hours. A procedure, to determine optimum tilt angle of reflector in order to utilize maximum amount of solar energy at noon, has been proposed. The use of reflector enhanced the average solar intensity on the top surface of solar pond by 22%. The maximum average temperature of trapezoidal solar pond with glass cover and reflector has been observed to be 70.5°C. The thermal efficiencies of LCZ, NCZ and UCZ for the trapezoidal solar pond with double-glass cover and reflector have been estimated to be 32.73%, 23.22% and 5.30%, respectively. In addition to experimental investigation, the sunny area ratio of TSGSP has been theoretically computed and compared with the cuboid solar pond having same top surface area and depth in order to see the effect of pond shape on sunny area ratio. The average yearly sunny area ratio of trapezoidal solar pond has been determined to be 11% higher than that of cuboid one.     

电化学降解与声电化降解苯胺溶液的对比实验研究

采用电化学和声电化两种方法处理苯胺溶液．考察了处理时间、苯胺浓度、pH、电解质浓度、电解电压等因素对苯胺降解率的影响,并对两种方法处理的溶液分别进行紫外分析。实验结果表明．在其他条件相同的情况下．声电化降解所得苯胺降解率远远大于采用电化学方法所得降解率。     

光谱特征法辨识不同污染景观河道中溶解性有机物的组分与来源

利用三维荧光光谱(EEMs)结合平行因子分析方法(PARAFAC)及紫外-可见光谱技术(UV-vis),对苏州古城区内不同污染状况的景观河道中溶解性有机物(DOM)的光谱特征和来源进行解析.结果表明,苏州古城区内景观河道水体总体上表现为氮、磷营养盐污染.水体中的DOM解析出4种荧光组分,分别为自源类色氨酸C1(AEx/...     

UV/Fenton技术处理某工厂高浓度乳化油废水

研究了UV/Fenton技术对高浓度金属清洗乳化油废水的处理效果,考察了亚铁与双氧水浓度、pH、反应时间和搅拌对COD去除效果的影响。实验结果表明,UV/Fenton技术对高浓度乳化油废水(COD平均浓度为35 000 mg/L)具有较高的去除效果,最佳工艺条件为:亚铁与双氧水浓度分别为2 400 mg/L和6 000 mg/L,pH为3,经过2 h反应,COD可降低至1 050 mg/L,去除率为97%。搅拌会降低COD的去除率。研究表明,UV/Fenton技术对高浓度乳化油废水具有很好的降解效果,且药品消耗较低,为目前此类高浓度有机废水的处理提供了技术参考。     

紫外吸收剂在湖泊中的分布及其对底栖动物的毒性效应

紫外吸收剂大量用于工业材料和个人护理品中,近年来在水体中不断被检出,同时由于其高度亲脂性,易在底泥和水生生物体内富集,产生潜在的毒性效应,已成为一类新型污染物。本文综述了紫外吸收剂在湖泊环境中的分布和生物富集效应,重点分析了二苯甲酮类等典型紫外吸收剂对底栖动物的药物代谢系统、抗氧化系统及其生长发育的影响及其毒性作用机制,并对未来该领域的研究进行了展望。     

利用MALDI-TOF MS技术简便、快速检测水华蓝藻的方法研究

以水华蓝藻为研究对象,用基质辅助激光解吸电离飞行时间质谱(MALDI-TOF MS)技术对其进行测定分析并获得了蛋白质指纹图谱。对铜绿微囊藻标准株(NIES-843)样品通过3种前处理方法得到的质谱图进行对比,确定了质谱分析的样品前处理方法,建立了利用MALDI-TOF MS技术简便、快速检测水华蓝藻的方法。对在水华中出现的4种不同蓝藻进行MALDI-TOF MS分析,结果表明各种蓝藻具有其特征性波谱,可据此对水华蓝藻进行区分和鉴定。该方法快速、简便、精确、可程序化,具有广泛的应用前景。     

雷达海杂波统计特性建模研究

介绍了海杂波统计特性建模的幅度特性、多普勒谱及空间相关这三个方面的研究状况,对各种建模的思路和模型效果进行了对比总结。对于幅度均值已有多个较为成熟的模型,但适用范围不同,结果差异也很大。幅度分布建模重点解决拖尾问题,复合建模是趋势。除平均谱外,开始研究短时多普勒谱。空间相关性建模主要建立空间相关长度与雷达及海洋参数间的联系,但是研究还不够全面。总的来看,已由单纯经验建模发展为力图在机理研究指导下有一定物理意义的建模。尽管海杂波建模效果愈来愈接近实际,但建模依然存在诸多问题。     

UV和H2 O2联合消毒灭活饮用水中大肠杆菌研究

以大肠杆菌为研究对象,对单独紫外线(UV)、H2O2及两者不同组合方式的灭活效果进行了分析.结果表明,单独H2O2对大肠杆菌基本无灭活效果,加入浓度为20 mg·L-1的H2O2接触时间为30 min时,灭活率仅为0.02个对数级;单独UV工艺可在一定程度上灭活大肠杆菌,紫外线剂量为10 mJ·cm-2时,灭活率可达到4.51个对数级.紫外线和H2O2联合消毒在一定程度上提高了消毒效果,且不同的组合方式对灭活效果有很大的影响.先UV后H2O2消毒效果优于先H2O2后UV,当紫外线剂量为5 mJ·cm-2时,加入H2O2分别反应2.5、5、10、20 min后,两者的灭活率分别较单独UV消毒增加0.09、0.35、0.38、0.68和0.01、0.07、0.14、0.53个对数级.而UV与H2O2同时消毒效果优于UV与H2O2顺序消毒,当紫外线剂量为5 mJ·cm-2时,加入H2O2反应20 min后,灭活率较UV-H2O2和H2O2-UV工艺分别增加了0.43和0.58个对数级.随着紫外线强度的增加,大肠杆菌的灭活效果不断提高.     

脉动风速功率谱与随机Fourier幅值谱的关系研究

功率谱密度函数是随机过程在频域内的重要特征量,但由于其本质上是平稳过程的频域数值特征,致使其很难全面反映原始随机过程的概率信息,这就需要从更本源的意义上考察随机过程。本文试图从Fourier随机函数的角度反映随机过程,将经典的功率谱密度函数中具有物理意义的可测变量看作随机变量,利用功率谱与Fourier幅值谱的关系,定义了随机Fourier幅值谱;以Davenport谱为例,证实当地面粗糙度服从对数正态分布、10m高度基本风速服从极值Ⅰ型分布时,可通过功率谱构造具有物理意义的随机Fourier幅值谱。通过实测风速Fourier谱与随机Fourier幅值谱的比较,证明随机Fourier幅值谱的概念具有合理性。