含固率和接种比对林可霉素菌渣厌氧消化的影响

通过林可霉素菌渣的中温厌氧消化摇瓶实验,比较不同的含固率(3%、5%、8%、10%)和接种比(0.5、1、2、3)对菌渣产甲烷能力的影响,以确定菌渣厌氧消化的最优工艺条件.结果表明,在研究参数范围内,含固率越低,接种比越高,越有利于甲烷的产生;经过10d的培养,在含固率为3%、接种比为3时的工况中,菌渣的挥发性固体(VS)累计净产甲烷量最高,为106 mL/g;而含固率>5%、接种比2的液态发酵工艺,此条件既能保证厌氧消化不受消化产物(胺和挥发性有机酸)积累的抑制,也可以缓冲菌渣中残留林可霉素对消化微生物可能产生的抑制效应.     

南宁城市内河水体和表层沉积物中有机氯农药分布特征

采用改进的固相萃取、加速溶剂萃取和气相色谱-电子捕获检测器,对广西壮族自治区南宁5条城市内河的水体和表层沉积物样品中7种痕量有机氯农药(OCPs)的残留状况进行了分析测定. 结果表明,南宁城市内河水体有机氯农药以HCHs为主,ρ(OCPs)为nd～0.141 μg/L. 5个点位沉积物中w(总OCPs)为2.13～2.80 μg/kg,均检出4,4′-DDE和4,4′-DDD,w(DDD)/w(DDE)<1,且DDTs在沉积物中的含量普遍高于HCHs. 各点位沉积物中有机氯农药各组分含量均低于美国环境保护署采用的无毒害风险浓度.      

固体废物六价铬分析样品碱消解快速前处理方法

提出一种固体废物六价铬分析样品快速前处理方法,其消解条件、样品分析与现行国家标准方法相同,不同的是,样品消解后,用离心方法替代过滤方法,能实现样品的快速、准确分析。     

北京城区大气多环芳烃的沉降特征

从2006年6月至2007年6月期间采集了北京市区的降尘和大气TSP,分析了其中的PAHs和降尘的粒度。降尘颗粒大部分在100μm以下,体积平均径和中位径D50的范围分别为18.89-53.117μm和11.59-28.98μm。全年降尘平均沉降通量为0.451 9 t/（km2.d）,冬季高,夏秋季低;∑16PAHs的沉降通量平均为4.76 g/（km2.d）,冬季高,夏季低,与同期的大气SO2的API指数显著相关。TSP中的∑16PAHs与降尘中的∑16PAHs具有显著的相关关系,成分谱一致。PAHs的沉降速率变化范围为0.004-5.46 cm/s,夏季高、冬季低。交通沿线∑16PAHs的沉降通量远远高于非交通线的沉降通量。     

冬季土地管理对稻季CH4产生、氧化和排放的影响

通过室内培养和田间试验测定了冬季休闲、种麦和淹水处理水稻生长期CH4的产生潜力、氧化潜力及其排放通量,以探讨冬季土地管理对后续稻季CH4产生、氧化和排放的影响。结果表明：休闲与种麦处理间CH4产生潜力无显著差异（P〉0．05）,但2者均显著低于淹水处理（P〈0．05）;各处理间CH4氧化潜力无显著差异（P〉0．05）,土壤中NH4^＋-N含量可能是较冬季土地管理更为重要的影响CH4氧化潜力的因素;休闲处理CH4平均排放通量显著高于种麦处理（P〈0．05）,但2者均显著低于淹水处理（P〈0．05）。冬季持续淹水稻田CH4产生潜力显著高于冬季排水稻田是其CH4排放量远高于冬季排水稻田的原因。冬季土地管理对稻季CH4排放的影响主要受CH4产生潜力而非CH4氧化潜力的限制。     

衡阳市城市垃圾处理现状及改进建议

城市垃圾数量大、成分复杂,如果不好好处理会对环境和人体健康造成很大危害.就城市垃圾的危害及垃圾处理现状进行了分析,并对衡阳市垃圾处理提出改进建议.参6.     

冬季淹水稻田CH_4产生、氧化和排放规律及其影响因素研究

采用静态箱/气象色谱法——田间原位观测和室内培养试验连续一年研究了冬季淹水稻田的CH4产生潜力、氧化潜力和排放通量,以探讨冬季淹水稻田CH4产生、氧化和排放的季节变化规律及其影响因素。结果表明：0~251 d（d表示淹水后天数）,CH4产生潜力逐渐增大,到251 d达最大值,之后逐渐减小;0~204 d,CH4氧化潜力变化较小,但到235 d急剧增至最大值,随后逐渐减小;0~169 d,稻田几乎没有CH4排放,192 d才开始有较明显的CH4排放,到230 d达最大值,为80.2 mg.m-2.h-1,随后逐渐减小,331 d出现一个CH4排放高峰。全观测期内CH4排放量为69.9 g.m-2,其中非水稻生长期排放6.7 g.m-2,占总量的9.5%。全观测期内CH4产生潜力与土温及土壤Eh均无显著相关性;全观测期内CH4氧化潜力与土温极显著正相关（P〈0.01）,水稻生长期CH4氧化潜力与土壤中氨氮含量呈极显著正相关（P〈0.01）;全观测期内稻田CH4排放与土温和CH4产生潜力两个因素均显著正相关（P〈0.05）而与土壤Eh呈显著负相关（P〈0.05）。     

活性炭辅助微波热解污泥反应条件的试验研究

针对微波不能直接实现原污水污泥高温热解的问题,采用活性炭作为微波能吸收物质辅助污泥热解。对影响污泥热解效能的3个主要因素：污泥样品量、活性炭掺杂量和微波辐射功率,各做了3个水平的考察,得到了试验条件下的最优方案：污泥样品量30g、活性炭掺杂量6g、微波辐射功率1200W。结果表明：在最优试验方案下,污泥能在7min内升至920℃的高温,实现污泥快速、高效热解。通过分析3个因素对污泥热解效能的影响,进一步对最优试验方案下的固体产物吸收微波的性能及用其作为掺杂物辅助微波热解污水污泥的可行性进行了研究,结果表明：固体残渣吸收微波性能良好,可以代替活性炭作为更经济、高效的污泥微波热解辅助材料。     

Effects of carrying handles,postures, materials and distances on carrying capability

This study recruited 14 industrial workers to examine the effects of carrying handles, postures, materials and distances on maximum acceptable weights of carrying (MAWC), and resulting heart rate and body rating of perceived exertion (RPE) for a 20 min intensive carrying task. This study showed that MAWC of carrying with bar handles, carrying with hands-and-body posture, solid materials and 4?m distance were significantly higher than that of carrying with groove handles, carrying with hands posture, liquid materials and 8?m distance, respectively. The resulting heart rates while carrying MAWCs of groove handles, hands-and-body carrying posture, solid materials and 4?m distance were lower than the resulting heart rates while carrying MAWCs of bar handles, hands carrying posture, liquid materials and 8?m distance, respectively. Most pair levels of independent variables resulted in similar body's RPEs except for the pair levels of carrying distance.     

The effect of barriers on reducing thermal heat fluxes from a hydrocarbon pool fire

The radiant heat flux from a pool fire is frequently calculated using the solid flame model, where the flame envelope is approximated as a stationary cylinder whose surface emits thermal radiation at a constant rate. Radiant heat flux calculations using the solid flame model assume the target to be at a given elevation, typically at ground level, and to have an unobstructed view of the fire. The presence of obstacles (e.g., walls, buildings, etc.) or terrain features that would create shaded areas and provide shielding of a target from the fire is typically neglected in these calculations: this is a conservative approach, but it is not accurate. This paper presents a methodology to utilize the solid flame model to calculate the heat flux to a target while taking into account the presence of an obstruction between the target and the fire. The shielded solid flame method can quantitatively account for the presence of obstacles as a passive mitigation measure and allows project developers or designers to optimize their facility layout to meet safety requirements. The methodology presented in this paper uses the same correlations found in currently used solid flame models (e.g., LNGFIRE3), therefore, it remains consistent with current regulatory requirements for LNG facilities in the U.S.