Corrosion behavior of steels for CO2 injection

The process chain for Carbon Capture and Sequestration (CCS) includes tubing for injection of CO₂ into saline aquifers. The compressed CO₂ is likely to contain specific impurities; small concentrations of SO₂ and NO₂ in combination with oxygen and humidity are most harmful. In addition, CO₂ saturated brine is supposed to rise in the well when the injection process is interrupted. The material selection has to ensure that neither CO₂ nor brine or a combination of both will leak out of the inner tubing. In this comprehensive paper the investigated materials range from low-alloy steels and 13% Cr steels up to high-alloy materials. Electrochemical tests as well as long term exposure tests were performed in CO₂, in brine and combination of both; pressure was up to 100 bar, temperature up to 60 °C. Whereas the CO₂ stream itself can be handled using low alloy steels, combinations of CO₂ and brine require more resistant materials to control the strong tendency to pitting corrosion. The corrosion behavior of heat-treated steels depends on factors such as microstructure and carbon content. For different sections of the injection tube, appropriate materials should be used to guarantee safety and consider cost effectiveness.     

轧钢污泥综合利用的技术研究

阐述了一种轧钢污泥的回收处理技术,该技术可把轧钢污泥有效地分离成氧化铁粉和混合油,实现综合利用,减少铁素资源浪费,有良好的经济效益和环境效益.     

经济转型中的中国废钢铁投资市场

废钢铁产业是我国再生资源产业的主体,其节能减排、低碳环保和不可替代的钢铁原料功效十分显著。阐述了我国废钢铁产业在经济转型中的主导地位、应用价值、投资环境及今后的发展战略。指出我国经济发展方式的转变,赋予了废钢铁产业良好的发展机遇和重大的历史使命,中国废钢产业具有良好的投资市场和巨大的发展空间。     

国内电炉钢发展现状与应用前景

通过电炉铜与转炉铜能耗对比,突显了电炉钢的节能与环保优势,同时介绍了国内外电炉钢应用现状。随着社会工业化的发展所带来的钢铁积蓄量的增加,以及电炉钢技术的不断完善和发展,加之迎合国家低碳经济政策的实施,国内电炉钢发展具有广阔前景。     

Pah characteristics in ambient air within a steel industrial complex

Ambient air samples at ten sites in an iron and steel industrial complex were collected from June to December for analyzing polycyclic aromatic hydrocarbons (PAHs). Sixteen species of PAH components in air samples were identified. The results indicate that both gaseous phase and particle‐bound PAHs at the top of the cokemaking plants are unusually high. The profiles of particle‐bound PAHs indicate that the predominant species at the top of, the coke oven batteries are those of high molecular weight components. The major components of particle‐bound PAHs at sampling sites near the fenceline, however, include the medium molecular weight components. The PAH profiles of air samples within the industrial complex show a strong similarity to those of cokemaking plant samples. The concentrations and the specific content of benzo(a)pyrene in the iron and steel industrial complex are higher than those values measured in urban area, petrochemical industry park, and open‐air burning area.     

我国重工业企业烟气脱硫技术及存在的问题

为使企业在"十二五"期间达到SO2减排指标,总结出几种目前应用普遍,技术成熟,投资、运行成本较低的脱硫工艺,包括烟气脱硫的基本原理、主要设备、技术难点及存在的问题。供企业新建,改建或扩建脱硫系统借鉴。     

绿色环保、高效节能、资源循环利用的清洁炼钢厂

主要介绍宝钢集团浦钢搬迁罗泾工程为建设绿色环保、高效节能、资源循环利用的现代清洁炼钢厂所采用的工艺技术、技术装备和技术措施。对炼钢工程中所采用的各种工艺技术、技术装备和技术措施等进行说明和分析。     

Effect of Sweating on Insulation of Footwear

The study aimed to find out the influence of sweating on footwear insulation with a thermal foot model. Simultaneously, the influence of applied weight (35 kg), sock, and steel toe cap were studied. Water to 3 sweat glands was supplied with a pump at the rate of 10 g/hr in total. Four models of boots with steel toe caps were tested. The same models were manufactured also without steel toe. Sweating reduced footwear insulation 19–25% (30–37% in toes). During static conditions, only a minimal amount of sweat evaporated from boots. Weight affected sole insulation: Reduction depended on compressibility of sole material. The influence of steel toe varied with insulation. The method of thermal foot model appears to be a practical tool for footwear evaluation.     

宝钢焦化废水处理技术发展与现状

焦化废水的处理一直是国内外废水处理领域的难题之一。文章以宝钢为例,介绍并分析了该企业焦化废水处理技术的发展与现状。     

超临界锅炉特种管材氧化皮结构特征及剥落规律

通过对超临界锅炉几种常用的铁素体钢及奥氏体钢高温换热管进行取样分析研究,得到了几种材质在运行中产生的氧化皮的结构特征和剥落规律。