基于空气质量监测数据的钢铁行业污染源识别方法

京津冀及周边地区等重点区域已经建立具有高时空分辨率特点的空气质量监测网,但监测数据主要用于环境空气质量评价,在大气污染来源识别中应用较少.采用特征雷达图中的双重归一化算法对区域上2018～2019年秋冬季空气质量监测数据中的SO₂、 NO₂、 CO、 PM_2.5和粗颗粒物(PM₁₀与PM_2.5的浓度差值)这5种因子进行分析,识别出偏SO₂、偏NO₂、偏CO、偏PM_2.5、偏粗颗粒物、偏SO₂-CO、偏NO₂-CO和偏PM_2.5-CO这8种典型污染特征.以偏SO₂-CO特征为例,结合污染特征时空分布、主要污染源排放特征和PM_2.5源解析,判断该特征下对空气质量影响最突出的污染源,并将该方法用于一次典型污染过程的分析.结果表明,研究时段内偏SO₂-CO特征的平均占比为7.6%.（1）偏S...     

钢铁企业资源综合利用与绿色发展

把生态理论引入太钢,将企业生产过程中的资源、能源、产品、废弃物等全部视为钢铁生态链中的一个物种,通过循环利用和产业链延伸实现了全流程的清洁、高效和企业的绿色发展。     

钢铁行业大气环境影响评价方法与建议

按钢铁行业大气环评报告书的结构和顺序,结合HJ 2.2-2008《环境影响评价技术导则大气环境》中的相关技术要求,从评价因子、源强、评价等级、大气监测、大气预测、防护距离等方面出发,分析了钢铁行业大气环评中的评价等级确定、大气监测、大气预测等工作中存在的问题,并提出解决方案和建议对策。     

不锈钢-铝电极电絮凝处理含铜废水的试验研究

采用不锈钢-铝为电极的电絮凝法对含铜废水进行了处理试验研究,模拟废水铜离子浓度为150 mg/L,以废水中的铜离子浓度和COD去除率为考察指标,在电流密度为15 mA/cm2、极板间距为3 cm、pH值为7、电解时间为120 min的条件下,Cu2+的去除率平均能达到99%以上,COD的去除率亦能达到97%;在此基础上,应用于实际的电路板腐蚀液废水的处理试验,发现Cl-浓度在200 mg/L以上时,对废水先进行相关预处理也能达到较好的处理效果,该研究对进一步探讨Cl-对电絮凝的影响机理有一定的借鉴意义。     

汽车镀锌板泥浆附着研究初探

介绍了镀锌板在大气和土壤中的研究结果;简要讨论了镀锌板通常出现的腐蚀形式;分析了镀锌板在泥浆状态中的腐蚀状况.其腐蚀是大气与土壤腐蚀的一个衔接过程,影响因素很多,可控性差.针对汽车板泥浆附着的腐蚀问题,设计了一种简化的研究模型,尝试性地做了一些实验室的研究,提出了几种可行的研究方法.     

我国典型钢铁行业主要工艺环节排放颗粒物源成分谱特征

鉴于我国钢铁行业排放颗粒物源成分谱数量不足,有待更新的现状,致力于服务精细化颗粒物源解析的需求,采用稀释通道系统对武汉市某钢铁公司的3个主要工艺环节(烧结、炼钢、炼铁)排放源进行了采样.构建了3类PM_(2.5)源成分谱及3类PM_(10)成分谱,对源谱主要化学组分特征进行了研究,并与国内其他区域已有的钢铁行业源谱研究进行了对比.结果表明:(1)烧结工艺源成分谱中,SO_4~(2-)、Al和NH_4~+等含量高,PM_(2.5)源谱中质量分数依次为22. 2%、4. 5%和3. 5%,PM_(10)源谱中依次为36. 0%、5. 2%和2. 7%,炼铁工艺Fe元素含量最高,在PM_(2.5)源谱和PM_(10)源谱中分别达到28. 3%和24. 5%,炼钢工艺源谱Ca、Fe元素等为主要组分;(2)元素组分中,烧结工艺S元素含量最高,地壳元素在PM_(10)源谱中含量更高,炼铁工艺Pb、Cr等重金属含量偏高,炼钢工艺Cr富集;(3)源谱之间分歧系数的计算显示,同类工艺粗细粒径源谱相似性偏高,烧结工艺与其他两类工艺源谱之间差异性较高,炼钢工艺与炼铁工艺差异性较低.同国内其他区域研究源谱相比,发现Fe、Si和Ca等为钢铁行业排放颗粒物中标识性组分,而碳组分和SO_4~(2-)等组分特征随生产方式、除污设备等不同表现出不同特征.     

小冲杆试验测定重离子辐照A508-3钢的硬化和脆化

目的采用小冲杆测试方法测量高能重离子辐照反应堆压力容器A508-3钢的辐照硬化和脆化特性,为工况条件下反应堆压力容器寿命预测提供实验依据。方法采用兰州重离子加速器提供的高能C^(6+)离子通过减能装置在290℃条件下开展A508-3钢辐照实验,并在样品表面形成一定厚度、准均匀分布的离位损伤层。通过开展不同辐照剂量辐照样品的小冲杆测试,得到不同辐照剂量A508-3钢的小冲杆载荷-位移曲线。通过对小冲杆测试得到的载荷-位移曲线的分析,测定不同辐照剂量样品的辐照硬化和脆化特性。结果压力容器A508-3钢辐照样品的硬化和脆化随着辐照剂量的增加逐渐增强,0.15 dpa以前呈线性增长,而后缓慢增大,约0.2 dpa时达到饱和趋势。结论通过小冲杆测试可以得到离子辐照样品的硬化和脆化行为,A508-3钢辐照硬化和脆化行为具有一致的变化趋势。     

Low-carbon transition of iron and steel industry in China: Carbon intensity, economic growth and policy intervention

As the biggest iron and steel producer in the world and one of the highest CO₂ emission sectors, China's iron and steel industry is undergoing a low-carbon transition accompanied by remarkable technological progress and investment adjustment, in response to the macroeconomic climate and policy intervention. Many drivers of the CO₂ emissions of the iron and steel industry have been explored, but the relationships between CO₂ abatement, investment and technological expenditure, and their connections with the economic growth and governmental policies in China, have not been conjointly and empirically examined. We proposed a concise conceptual model and an econometric model to investigate this crucial question. The results of regression, Granger causality test and impulse response analysis indicated that technological expenditure can significantly reduce CO₂ emissions, and that investment expansion showed a negative impact on CO₂ emission reduction. It was also argued with empirical evidence that a good economic situation favored CO₂ abatement in China's iron and steel industry, while achieving CO₂ emission reduction in this industrial sector did not necessarily threaten economic growth. This shed light on the dispute over balancing emission cutting and economic growth. Regarding the policy aspects, the year 2000 was found to be an important turning point for policy evolution and the development of the iron and steel industry in China. The subsequent command and control policies had a significant, positive effect on CO₂ abatement.     

黑色金属材料在长江淡水中的腐蚀行为

通过现场暴露试验,获得了2种碳钢、3种不锈钢及1种不锈钢与碳钢复合板材料在武汉长江淡水中的4年腐蚀试验结果,总结了它们的腐蚀行为。结果表明,Q235和16Mn碳钢在武汉长江中有较高的腐蚀率和明显的点蚀,稳定腐蚀率为0.055 mm/a;暴露4 a,奥氏体不锈钢304和316L没有明显腐蚀,而马氏体不锈钢430有较明显的点蚀和缝隙腐蚀;马氏体不锈钢0Cr13Ni5Mo与Q345C复合钢板在长江淡水中使用4 a后,0Cr13Ni5Mo发生严重的点蚀,说明马氏体不锈钢在淡水中的应用应慎重。     

Comparative study of microbial community structure in di erent filter media of constructed wetland

Comparisons of microbial community structure, in eight filter media of zeolites, anthracite, shale, vermiculite, ceramic filter media, gravel, steel slag and bio-ceramic, were undertaken by analyzing the phospholipid fatty acid (PLFA) composition. A total of 20 fatty acids in the range of C11 to C20 were determined but only 13 PLFAs were detected in steel slag. They consist of saturated fatty acids, branched fatty acids, monounsaturated fatty acids, and polyunsaturated fatty acids. The variation of fatty acids was revealed in the relative proportions of these fatty acids in di erent media. The aerobic prokaryotes were the predominant group in all media. The PLFA composition showed significant di erences among the eight di erent media by Tukey’s honestly test. It was found that steel slag was significantly di erent in the microbial community as compared to other filter media, probably due to its alkaline e uent. Steel slag alone is probably not a good choice of substratum in constructed wetlands. The principle components analysis (PCA) showed that zeolites, bio-ceramic, shale and vermiculite had a similar microbial community structure while steel slag and ceramic filter media were distinct from other media.