4种人工湿地基质对马拉硫磷的吸附特性

通过基质对马拉硫磷的等温吸附和吸附动力学实验,研究天然土壤、煤渣、沸石、砾石对马拉硫磷的吸附特性,为人工湿地处理含马拉硫磷废水提供理论依据.结果表明:马拉硫磷浓度为2.25 ～ 90 mg/L条件下,Langmuir和Freundlich方程均能较好地拟合4种基质对马拉硫磷的等温吸附过程,并且Freundlich方程的拟合效果要好于Langmuir方程.马拉硫磷的理论饱和吸附量大小依次为天然土壤(9.9304 mg/g)＞煤渣(1.6173 mg/g)＞沸石(0.6039 mg/g)＞砾石(0.3965 mg/g).4种基质对马拉硫磷的缓冲能力大小依次为天然土壤＞煤渣＞沸石＞砾石,即当进水马拉硫磷浓度波动较大时,作为湿地基质天然土壤使人工湿地系统维持稳定出水水质的能力最强.马拉硫磷浓度为4.5 mg/L条件下,吸附动力学模型Elovich方程能较好地拟合4种基质对马拉硫磷的吸附动力学特征,说明4种基质对马拉硫磷的吸附是表面吸附和内部扩散吸附共同作用的结果.因此,天然土壤和煤渣适宜作为处理含马拉硫磷废水的人工湿地基质.     

CFD分析在烟气脱硫中的实际运用与研究

为降低某公司烧结机干法脱硫装置烟道阻力,减少引风机出力,实现节能优化,运用计算流体力学软件,对引风机出口烟道内流场进行三维数值模拟,并根据分析结果进行烟道的优化改造。改造后,吸收塔入口负压由-200Pa提升至-560Pa,风机电流由328A降为301.4A,节能降耗显著。     

阴极液及底物浓度对AFB-MFC同步废水处理及产电性能影响

为了提高厌氧流化床微生物燃料电池（AFB-MFC）的性能,并为双室MFC寻找价廉、易得、无污染的阴极液,在曝气量16～24 L/h、温度（35±2）℃、回流量10.2 L/h、阴极底边距阴极室内底部17.3 cm、外电阻250 Ω、水力停留时间（HRT）14.0～14.9 h以及进水pH 7.81～8.37下,研究了阴极液及底物浓度对系统产电及废水处理性能的影响。结果表明,使用缓冲溶液、阳极室出水和自来水作阴极液时,自来水的产电性能最佳,阴极液种类不影响系统有机基质的去除。以自来水为阴极液时,阴极液pH及电导率随运行时间增加而增加,COD去除率为80.11%～89.29%,输出电压及功率密度开始随运行时间增加而增加,之后稳定在440～452 mV和48.40～51.08 mW/m²之间。增加底物浓度对COD去除率影响不大,而输出电压及功率密度随底物浓度增加而下降;底物COD浓度由3 307.09 mg/L增至9 520 mg/L时,COD去除率在85.77%～94.44%之间,输出电压及功率密度则分别由449 mV和50.40 mW/m²下降至406 mV和41.21 mW/m²。自来水作阴极液可避免二次污染及阴极液对阳极室微生物的影响,并得到高的产电能力。     

中国2030年CO2排放总量预测研究

我国2005年和2010年CO2排放总量分别为55亿t和81.52亿t,“十五”和“十一五”期间年均增长率分别为11.0％和8.0％.中国2011-2015年、2016-2020年、2021-2025年和2026-2030年GDP年均增长率分别为8％、7％、6％、5％的经济发展模式与对应的能源消费弹性系数分别为0.5、0.5、0.4和0.3的能源发展模式,预测2030年燃煤、燃油和天然气CO2排放量及全国CO2排放总量.提出减少CO2排放总量对策,主要包括：调整能源结构,尽量减少煤炭消费量占能源消费总量的比例,增加石油、天然气和新能源的比例,提高CO2综合利用率,完善CO2管理政策与法律法规等.     

湿地生态系统基质重金属积累与酶活性的研究现状

湿地生态系统具有净化污水的功能,因其具有高效低耗等优点,在污水处理方面极具开发应用前景,而基质作为湿地生态系统重要组成部分,已成为众多学者的研究热点。本文综合分析了湿地生态系统基质中重金属积累和酶活性的时空分布及影响因素的研究现状,并对相关研究提出了新的认识与展望,以期为湿地生态系统基质去除废水中重金属的深入研究和应用提供综合分析资料。     

A human health risk assessment of rare earth elements in soil and vegetables from a mining area in Fujian Province,Southeast China

Contaminated food through dietary intake has become the main potential risk impacts on human health. This study investigated concentrations of rare earth elements (REEs) in soil, vegetables, human hair and blood, and assessed human health risk through vegetables consumption in the vicinity of a large-scale mining area located in Hetian Town of Changting County, Fujian Province, Southeast China. The results of the study included the following mean concentrations for total and bio-available REEs of 242.92 ± 68.98 (135.85–327.56) μg g⁻¹ and 118.59 ± 38.49 (57.89–158.96) μg g⁻¹ dry weight (dw) in agricultural soil, respectively, and total REEs of 3.58 ± 5.28 (0.07–64.42) μg g⁻¹ dw in vegetable samples. Concentrations of total REEs in blood and hair collected from the local residents ranged from 424.76 to 1274.80 μg L⁻¹ with an average of 689.74 ± 254.25 μg L⁻¹ and from 0.06 to 1.59 μg g⁻¹ with an average of 0.48 ± 0.59 μg g⁻¹ of the study, respectively. In addition, a significant correlation was observed between REEs in blood and corresponding soil samples (R² = 0.6556, p < 0.05), however there was no correlation between REEs in hair and corresponding soils (p > 0.05). Mean concentrations of REEs of 2.85 (0.59–10.24) μg L⁻¹ in well water from the local households was 53-fold than that in the drinking water of Fuzhou city (0.054 μg L⁻¹). The health risk assessment indicated that vegetable consumption would not result in exceeding the safe values of estimate daily intake (EDI) REEs (100−110 μg kg⁻¹ d⁻¹) for adults and children, but attention should be paid to monitoring human beings health in such rare earth mining areas due to long-term exposure to high dose REEs from food consumptions.     

A method for evaluating transport energy consumption in suburban areas

Urban sprawl is a major issue for sustainable development. It represents a significant contribution to energy consumption of a territory especially due to transportation requirements. However, transport energy consumption is rarely taken into account when the sustainability of suburban structures is studied. In this context, the paper presents a method to estimate transport energy consumption in residential suburban areas. The study aimed, on this basis, at highlighting the most efficient strategies needed to promote awareness and to give practical hints on how to reduce transport energy consumption linked to urban sprawl in existing and future suburban neighborhoods. The method uses data collected by using empirical surveys and GIS. An application of this method is presented concerning the comparison of four suburban districts located in Belgium to demonstrate the advantages of the approach. The influence of several parameters, such as distance to work places and services, use of public transport and performance of the vehicles, are then discussed to allow a range of different development situations to be explored. The results of the case studies highlight that traveled distances, and thus a good mix between activities at the living area scale, are of primordial importance for the energy performance, whereas means of transport used is only of little impact. Improving the performance of the vehicles and favoring home-work give also significant energy savings. The method can be used when planning new areas or retrofitting existing ones, as well as promoting more sustainable lifestyles regarding transport habits.     

Sustainable consumption in Brazil: Identification of preliminary requirements to guide product development and the definition of public policies

Sustainable product development is closely related to sustainable consumption. The understanding of consumers' purchase, use and discard behaviours may facilitate the identification of requirements to guide manufacturers in the development of sustainable goods and services. The aim of this paper is to investigate consumers' perception about factors that motivate or discourage the consumption of sustainable products to identify demands and convert them into requirements. South Brazilian green and traditional consumers were asked to complete an exploratory qualitative questionnaire. Their answers were organized and compared to identify differences and similarities between the demands of these two groups. Furthermore, demands were converted into requirements for packages, products, manufactures, stores planning and discard systems. The interpretation of factors that motivate or discourage the purchase of sustainable products given by interviewees led to the creation of a list of possible public policies or programmes, aiming to support sustainable consumption. The results demonstrate the necessity of further quantitative investigation between consumer groups, for validation purposes.     

电解法处理含镍废水及纯镍的回收

采用电解回收法处理Ni2+含量为2g/L的废水,在阴极回收纯镍。研究了电解电流、极距、NH4Cl浓度、pH值等因素对Ni2+去除率、槽压、阴极能耗的影响,得出最优工艺参数为:温度20℃,电解时间20min时、电解电流300mA,极距15mm,NH4Cl浓度5g/L,pH值8.0,该条件下Ni2+去除率为96.926%,槽压16.21V,阴极能耗22.418kW.h/kg,在阴极可得到沉积6.45μm厚的镍板。     

Effects of increased wood energy consumption on carbon storage in forests of the United States

Large but feasible increases that have been projected for the production of wood energy in the United States can be expected to significantly alter the current carbon storage patterns in US forest vegetation. The 1976 net wood increment left after forest cutting equals about 136 × 10⁶ tons of carbon/year, with about 60% of the increment found in merchantable trees, and the remainder in nonmerchantable components.Achieving 5–10 quads of wood energy beyond 1976 levels by the year 2010 can significantly change current carbon storage patterns with the magnitude of change dependent on the extent of residue harvest to meet energy goals, and the rate of future forest growth. Complete loss of the apparent net wood increment is a possible outcome.Although the future growth and harvest situation cannot be known now, a range of possible scenarios suggests that US forests in the year 2010 will store much less carbon than today, thus significantly changing their role in the global carbon cycle.