甘蔗不同叶位叶片形态与冠层特征的关系

利用CI-100数字植物冠层分析仪和CI-203叶面积分析仪测定了4个甘蔗品种不同叶位层的冠层参数和相应叶位叶片的形态特征，结果表明：不同基因型不同叶位层问叶片形态、冠层空间结构和冠层辐射特征存在显著差异，不同叶位层叶面积指数、叶簇倾角和叶分布的变化主要由冠层内不同叶位叶片叶宽的变化引起，而不同叶位层消光系数的变化主要与叶簇倾角和叶分布有关；散射光透过系数的变化主要与叶面积指数、叶簇倾角和叶分布有关，直射光透过系数的变化主要与叶分布、叶宽、长宽比有关，光合有效辐射的变化与叶面积指数、叶面积、叶宽、长宽比有关．研究结果同时表明，叶片形态与冠层辐射特征存在显著的典型相关关系．图2表4参15。     

Growth and metal uptake of energy sugarcane (Saccharum spp.) in different metal mine tailings with soil amendments

A pot experiment was conducted to investigate the feasibility of growing energy sugarcane(Saccharum spp.) in three different metal mine tailings(Cu, Sn and Pb/Zn tailings) amended with uncontaminated soil at different mixing ratios. The results indicated that sugarcane was highly tolerant to tailing environments. Amendments of 20% soil to Sn tailings and 30% soil to Cu tailings could increase the biomass of cane-stem for use as the raw material for bioethanol production. Heavy metals were mostly retained in roots, which indicated that sugarcane was useful for the stabilization of the tailings. Bagasse and juice, as the most valuable parts to produce bioethanol, only accounted for 0.6%– 3% and 0.6%–7% of the total metal content. Our study supported the potential use of sugarcane for tailing phytostabilization and bioenergy production.     

Optimization of fermentation process for saccharide-based fuel ethanol production by Saccharomyces cerevisiae北大核心CSCD

低成本、高产量的发酵工艺是实现工业燃料乙醇经济和环境可持续性发展的关键,而不需要重大基础设施改变或投资.为获得酿酒酵母(Saccharomyces cerevisiae)利用甘蔗汁生产燃料乙醇的最优发酵工艺,首先对发酵体系的氮源条件进行优化;其次,在单因素试验基础上,以乙醇发酵效率为响应值,通过响应面法优化了燃料乙醇生产的发酵工艺,并通过补料分批发酵技术在5 L发酵罐中进一步扩大发酵.结果表明,以1.0 g/L (NH)SO和1.0 g/L酵母提取物作为发酵氮源,乙醇发酵效率和得率比对照可分别提高4.80%、9.52%.响应面设计获得的最优发酵工艺条件为在总糖浓度150.0 g/L、酵母提取物浓度2.0 g/L、发酵时间24.5 h、pH5.0、外加(NH)SO浓度1.0 g/L时,最高乙醇发酵效率可达到91.10%.在5 L发酵罐中采用补料分批发酵获得的最终乙醇浓度达到98.92 g/L,发酵效率维持在90%左右,乙醇生产力最高达到3.81 g Lh.本研究获得了一种高效生产糖质燃料乙醇的发酵工艺,可在较短时间内获得高浓度乙醇且消耗较少氮源,结果可为进一步利用糖质原料进行高效生物炼制及高浓度乙醇工业化生产提供参考.(图6表6参30)