试论生物法与“组合法”处理屠宰废水

本文论了宰屠废水的水质特征，我国屠宰废水处理的主要工艺。侧重阐述了生物法与“组合法”处理屠宰废水的运行机理与处理效果。在对比了这两种方法各自优缺点的基础上，作者推荐采用“厌氧（兼氧）－好氧生物法”。     

EVALUATION OF CURRENT TECHNIQUES FOR NUTRIENT REMOVAL FROM WASTEWATERS1

ABSTRACT. A comprehensive evaluation of current techniques for nutrients, nitrogen and phosphorus, removal from wastewaters was conducted by the author under a research project supported by the Office of Water Resources Research, Department of the Interior. The object of this study was to compile and evaluate, under one cover, the available information on current techniques for removing nutrients from wastewaters with emphasis on type of treatment (physical, chemical, biological, or any combination); economics (capital and operating costs); efficiencies, and applications. Due to space limitations, only a brief summary of this work is presented in this paper. A copy of the completion report may be obtained from the author.     

POTENTIALS FOR REUSE OF WASTEWATER IN NORTH CENTRAL TEXAS1

ABSTRACT There are several possible ways in which wastewater from municipalities may be reclaimed and reused so as to minimize the need for imported water in North Central Texas. The rationale for reuse is enhanced by the fact that new water quality requirements in the Trinity River system will necessitate a very high degree of treatment at municipal sewage plants, just for discharge to surface streams. The largest potential market for municipal effluent is the steam-electric power industry. Within the next decade the generating capacity for electric power in North Central Texas will have to be more than doubled to meet increasing demand. Adequate supplies of condenser cooling water for such expansion will be difficult to obtain and assure. New large power stations might advantageously be located adjacent to municipal wastewater treatment plants, to utilize effluent as make-up water for cooling towers. Experience elsewhere has shown that well-treated wastewater can be used for cooling tower make-up with a minimum of trouble, with a considerable saving in overall cost, and with conservation of pristine water for other uses.     

STABILITY AND REACH LENGTH IN WATER SURFACE PROFILE DETERMINATION1

ABSTRACT: Extension of basic step methods of backwater computation to reaches of finite length is examined. Accuracies of commonly accepted hydraulic loss equations under particular water surface profile conditions are compared. Simulation of energy lines within a reach by parabolic curves is found to minimize error provided orientation of the axis of the parabola is selected in accordance with prevailing hydraulic conditions. Theoretical basis for an index reach length beyond which single-step computation from end to end of the reach must be in error is developed. Reduction of this reach length by suitable factors tailored to hydraulic conditions yields a mathematically defined allowable reach length for backwater computation. When reach length does not exceed this allowable reach length, no significant error may be detected. Automatic insertion of synthetic cross sections interpolated between surveyed cross sections when these are inadvertently spaced too far apart enables computation to proceed. This device is error-free for prismatic channls but may introduce error for irregular natural channels. Preliminary trials indicate that results so obtained may be accepted provided the fall in the original reach does not exceed from one to two feet. When this is exceeded, additional cross sections should be surveyed.     

WATER SUPPLY AND WASTEWATER DISPOSAL IN RURAL AREAS OF INDIA1

ABSTRACT: Piped water supply and sewerage have been taken almost for granted in the developed countries. However, most people in the United States have little knowledge of the condition of public health amenities in the developing countries. The paper reviews the importance, background and current status of water and wastewater facilities in India. The relative situation in urban and rural areas, conventional practices in environmental hygiene, the programs for improvement and the problems involved with possible solutions are given. The case history of a town is also included for illustrative purposes.     

混凝沉淀-二氧化氯氧化法处理印染废水

介绍了混凝沉淀－ＣｌＯ２氧化法处理印染废水的反应机理,工艺流程,处理效果及经济效益分析。在２个工厂的实际应用表明,该法工艺简单,操作方便,投资少,效果好。     

催化裂化废水萃取脱酚预处理研究

选用焦化粗柴油为萃取剂,对催化裂化含酚废水进行脱酚预处理,结果表明,最佳萃取条件为：ｐＨ７．０－８．５,温度１５－４０℃,油水体系比１．７－２．１,理论萃取级数４－７级。在上述条件下,出水酚质量浓度为５０ｍｇ／Ｌ。萃取后的粗柴油用于炼油厂加氢精制装置。     

石灰-聚铁法处理硫酸厂废水的研究

对各种处理硫酸厂废水的方法者了探讨,选择了以百石灰和聚合硫酸铁为药剂去除废水中砷,硫等污染物的方法。该法工艺简单,混凝剂投加量少,运行费用低,处理后的废水可达到排放标准。     

洗涤剂中的磷对环境的影响及对策的探讨

本文介绍了关于洗涤剂中磷对环境影响的两种典型观点和解决的办法,并从经济和环境的角度进行全面的分析,得出合理的结论和建议。     

利用粉煤灰处理含碱污水的试验研究

为了探讨火电厂除灰水中的粉煤灰（含炉渣）对炼油厂含碱污水中石油类、ＣＯＤ(ｃｒ)等污染物的吸附处理效果,根据某单位现场情况,将炼油厂含碱污水送入火电厂除灰沟→经充分混合排入储灰场→并经长时间沉降分离的流程进行模拟试验,结果表明：由于粉煤灰的吸附作用,显著降低了炼油厂含碱污水中的石油类、ＣＯＤ(ｃｒ)、挥发酚、碳化匕物等污染物。