Utilization of Bagasse Energy in Thailand

Bagasse, a biomass fuel, is the waste generated by the sugar-making process from sugar cane. Sugar making is one of the most important agricultural-produce processing industries for developing countries in Southeast Asia, Latin America and Africa. As sugar producing plants need electric power and process steam, co-generation using bagasse as an alternate fuel for petroleum has been in use for some time. Thailand recently became one of the largest sugar exporters by enlarging plant capacities and improving equipment, thus reducing its production cost. In addition, the Thai government promotes power generation using bagasse as a means to combat global warming by raising the purchase price of the surplus power. The industry is in the process of further raising the plant capacity, and improving the power-generating efficiency. This will enable a plant to generate more electric power than its in-plant need so that the surplus power can be sold to the commercial grid. It also plans to become a local power supplier during off-season of sugar making by adding a condensing turbine generator. A typical Thai sugar plant of the latest design generates steam of 4Mpa at the bagasse boiler outlet with the temperature of 400°C at 84% boiler efficiency. With the bagasse LHV of 7,540 kJ/kg and that of fuel oil 41, 840 kJ/kg, and taking 90%as oil-burning boiler efficiency, 5.95 kg of bagasse would replace 1 kg of oil. The Kyoto Mechanism defines CO₂ generation by fuel oil as 2.65 kg per liter. Using 0.85for the specific gravity of fuel oil, the amount of CO₂ generation will be 3.12 kg-CO₂/kg. Therefore, CO₂reduction per ton of bagasse in terms of fuel oil will be: 3.12/5.95 =0.524 kg-CO₂/kg-bagasse. As 1 kg of bagasse generates 2 kg of steam, the CO₂reduction of a 100t/h steam boiler will be112,660 ton/year for an annual operation of4,300 hours, as follows. 0.524 × 100/2 = 26.2 t-CO₂/h, 26.2 × 4,300 =112,660 t-CO₂/year. This revised version was published online in August 2006 with corrections to the Cover Date.     

我国城市污泥中醚类和卤代烃类有机污染物的初步研究

应用GC／MS联机检测技术对我国大陆和香港共11个城市污泥中4种醚类和4种卤代烃类化合物进行分析。结果表明，醚类化合物的总含量在0－7．743mg/kg之间，以双（2－氯异丙基）醚为主，主要分布在兰州污泥和广州污泥中；卤代烃类化合物的总含量在0．007－3．237mg/kg之间，以六氯环戊二烯为主，主要分布在兰州污泥、佛山污泥和沙田（香港）污泥中。污泥中醚类和卤代烃类化合物的种类及其含量与污水来源、污水处理方式、污泥类型、化合物的结构和理化性质等因素有关。     

Simultaneous sorption of aqueous phenanthrene and phosphate onto bentonites modified with AlCl3 and CTMAB

The purpose of this work is to synthesize a new type of bentonite sorbent that can simultaneously remove both organic compounds and phosphate from water. Inorganic-organic bentonites (Al-CTMAB-Bent) were synthesized by modifying bentonites with both AlCl₃ and cetyltrimethyl ammonium bromide (CTMAB). Simultaneous sorption of aqueous phenanthrene and phosphate onto Al-CTMAB-Bent was examined. Removal rates of phenanthrene and phosphate from water reached 96.3% and 90.2%, respectively, at their respective initial concentrations of 1 mg/L and 5 mg/L and the added amount of Al-CTMAB-Bent was 1.25 g/L. The residual turbidity of the Al-CTMAB-Bent suspension decreased 81.4% compared to that of organobentonite suspension after a 1 h settling time. Thus, inorganic-organic bentonite can be used to treat wastewater containing both organic pollutants and phosphate. Translated from Environmental Science, 2006, 27(1): 91–94 [译自: 环境科学]     

相对灰色关联度在城市污水处理工艺优选中的应用

通过对城市污水处理工艺评价指标的定量化处理，并根据奖优罚劣的原则对初始指标集进行[-1，1]区间线性规范化处理，确定理想最优方案（A^＊）和理想最劣方案（A-），以此计算出各待选方案与它们的相关系数（ζ）。采用变异系数法计算各指标权重（ω），并计算各候选方案相对最优方案的灰色关联度，进而确定最佳方案。     

HA-SBR法在制药废水中的应用

介绍SBR法在制药废水中的应用及工艺流程.通过处理COD从3600mg/l降到130mg/l.COD总去除率达到96%,出水可以达标排放.     

包埋法固定化细胞技术及其在水处理中的应用研究

固定化细胞技术(主要为包埋技术),由于方法简单、条件温和、较高的稳定性及细胞容量,在废水处理中应用广泛.本文主要介绍了近年来固定化细胞技术在污水深度处理中的应用研究现状和发展前景,并对固定化细胞技术在污水深度处理过程中的影响因素进行简要论述.     

关于防范环境突发事件的探索和思考

从环保工作实际出发,阐述了防范环境突发事件的3个长效机制,即排查潜在事故隐患,建立信息系统;依据信息指标,建立预警系统;控制污染事态,构建应急处理系统.     

城市污水厂污泥堆肥中试实验研究

城市污水厂污泥由于产生量大且成分复杂，如何对它进行稳定化、无害化处理已越来越受到人们的关注。本研究基于好氧发酵仓式堆肥系统，研究了城市污泥处理过程中温度、含水率、pH、有机质、水溶性有机碳、总氮和发芽指数等指标参数的变化规律。研究结果表明：当物抖初始含水率控制在65％左右时，在强制通风量112．5m^3／12hr，搅拌频率30min/24hr的工艺条件下，堆肥过程可以实现顺利升温并在55℃以上维持3天，满足杀灭致病茵要求的条件；14天反应用期结束时，物抖含水率、水溶性有机碳和有机质含量显著降低，堆肥产品腐熟，卫生学指标达到了美国EPA污泥产品A类标准；得列的污泥产品成为性质优良的土壤质量调节荆。     

高锰酸钾与接触氧化协同除锰及硬度对除锰效果的影响

针对日益严重的地表水锰污染，本实验采用高锰酸钾与接触氧化的方法协同除锰；通过调配进水中Ca²⁺、Mg²⁺含量模拟我国不同地区硬度差异显著的地表水，探究水体硬度对锰的去除效果的影响.结果表明：Mn²⁺被高锰酸钾氧化并形成"锰质活性滤膜"，可在停药后实现稳定有效除锰.成熟滤池的除锰效果会显著受到硬度的影响，进水硬度在40、200、400 mg·L^-1及700 mg·L^-1（CaCO₃计）时，接触氧化滤池分别在48、56、64 d及72 d实现稳定除锰，而4根滤柱对Mn²⁺去除的极限浓度分别为1.8、1.7、1.2 mg·L^-1及0.7 mg·L^-1.     

炼厂含油水罐事故分析与防范措施研究

炼化企业中有大量含油水罐,这些储罐中含硫、含油,固有风险很高,事故频发,有必要对各类污水罐事故进行分析和研究,找出共性的问题,提出解决方案和事故防范对策。通过对所搜集到的2009-2012年发生的36起含油水罐事故,从储罐类型、事故类型、点火源、操作阶段等方面进行统计分析,对案例进行深入剖析,找出了污水罐在设计、设备防腐以及操作管理中存在问题,并针对问题提出了相应的建议措施。