石化装置安全仪表系统KooN表决结构的误跳车率定量分析

为了更准确量化安全仪表系统的误跳车率,基于联锁回路SIF中传感器、逻辑解算器、执行机构引发误跳车的不同失效机理和模型,考虑共因失效对误跳车率的影响,提出1种更符合实际并适用于异型KooN结构的新子系统误跳车率计算模型（STR of Non-identical Redundant System,SNRS）。针对SIF回路的误跳车率计算,建立了1种分析安全联锁SIF回路误跳车率（Reliability based Spurious Trip,RST）的计算框架。研究结果表明:以某聚丙烯装置第三反应器保护系统为例,将SNRS和RST方法与目前主流的多种计算方法进行数值计算对比,验证了方法的有效性,能够有效进行定量分析。     

基于火探管式的锂离子电池灭火技术研究

为研究锂离子电池灭火方案,基于火探管灭火技术同时利用新型清洁灭火剂Novec 1230,组装成火探管灭火系统。在灭火测试平台上以功率为200 W的电热管作为外热源引发单电池或电池模组热失控,通过改变火探管的布置位置,记录相应的灭火行为以及灭火效率,并对实验结果进行了分析。研究结果表明,当火探管灭火系统直接布置在电池正上方时,在起火后的5.6s内控制火情;随着灭火剂用量增加可以显著降低体系温度,防止电池复燃以及连锁热失控现象发生;火探管有效覆盖区域外的失控电池作为热源将继续加热临近电池,引发连锁热失控,造成灭火系统失效;根据电池热失控后的燃烧行为以及传热行为,提出相应的火探管灭火系统复合方案。     

黄河中上游能源化工区大气污染跨界环境影响分析

对黄河中上游能源化工区近地面和边界层顶气象流场及该区域大气污染长距离输送产生的跨界环境影响趋势特征进行了分析。结果表明,该区域近地面和边界层顶的流场总体上为西北向东南流动,大气污染物长距离输送可能影响的区域主要为华中地区;区域冷空气的活动对其大气污染物的清除起重要作用;通过CALPUFF模型的模拟结果表明,该区域SO2的影响程度和范围明显大于NO2,在区域内部存在污染物浓度较高的区域,但未对区外造成显著跨界环境影响。     

A comparative study of vocational education and occupational safety and health training in China and the UK

In order to enhance Chinese workers’ occupational safety awareness, it is essential to learn from developed countries’ experiences. This article investigates thoroughly occupational safety and health (OSH) in China and the UK; moreover, the article performs a comparison of Chinese and British OSH training-related laws, regulations and education system. The following conclusions are drawn: China’s work safety continues to improve, but there is still a large gap compared with the UK. In China a relatively complete vocational education and training (VET) system has been established. However, there exist some defects in OSH. In the UK, the employer will not only pay attention to employees’ physiological health, but also to their mental health. The UK’s VET is characterized by classification and grading management, which helps integrate OSH into the whole education system. China can learn from the UK in the development of policies, VET and OSH training.     

Usability of non-standard lower anchor configurations for child restraint system (CRS) installation

Abstract

Objectives: The objective of this study was to determine whether the amount of tension required for proper child restraint system (CRS) installation varies with lower anchor spacing and to determine whether nonexperts can produce adequate tension on wider-than-standard lower anchor configurations.

Methods: CRSs were installed by certified child passenger safety technicians (CPSTs; n?=?6 subjects, n?=?72 installations) and nonexperts (n?=?30 subjects, n?=?120 installations) on a mock-up vehicle seat fixture with lower anchors set at 11 (standard), 15, 19, and 23 in. apart from one another. Each CPST installed a rear-facing (RF) infant base, RF convertible, and forward-facing (FF) convertible into each of the 4 spacing configurations in random order. The CPSTs were instructed to tighten the lower connector strap until the tension was exactly at the threshold between passing and failing the 1-in. test. Each nonexpert installed one CRS model into all 4 spacing conditions in random order. Nonexperts were instructed to install the CRS to the best of their ability. The tension produced on the lower connector strap was recorded via load cell in the lower anchor assembly of the vehicle seat. Resultant tension magnitudes were compared across spacing conditions using matched pair t-tests. The CPSTs’ mean 1-in. test threshold values were compared to tensions produced by nonexperts. Installations were visually evaluated for errors and qualitative usability feedback was collected via survey.

Results: CPSTs installed the infant base with higher tensions in the 15-, 19-, and 23-in. configurations compared to the standard 11-in. configuration (P = .034, .032, and .003, respectively). The nonexperts installed the infant base with higher tension in the 15- and 23-in. configurations compared to the 11-in. configuration (P = .004 and .026, respectively). The RF convertible and FF convertible installations showed no significant differences in tension among any of the spacing configurations for either group. Only 19% of the nonexperts’ installations were tight enough to pass CPST thresholds, and the pass rate did not vary with respect to lower anchor spacing. In feedback surveys, the nonexpert group did not show a consistent preference for either standard or wider-than-standard lower anchor configurations.

Conclusions: The amount of tension required to pass the 1-in. rule did not vary with lower anchor spacing configurations for the RF and FF convertible CRS, but the infant base required more tension in wider anchor configurations. Nonexperts tended to produce less than ideal tension in all configurations, although their tension magnitudes increased for the infant base in wider configurations.     

H∞ loop-shaping controller design for a grid-connected single-phase photovoltaic system

This paper presents a H_∞ loop-shaping controller for controlling dc-link voltage by regulating the switching signal of the inverter associated with a grid-connected single-phase photovoltaic system. To facilitate a robust control design, state-space realisation of the system model is made with uncertainties represented by linear fractional transformation. The controller is achieved through H_∞ synthesis followed by obtaining desired loop shapes through the choice of the proper weighting functions. The controller order is reduced by Henkel-norm method for facilitating its practical implementation. Controller performance is evaluated through carrying out simulations on MATLAB/Simulink platform under standard and changing atmospheric conditions, and fault condition.     

The 2030 Agenda for Sustainable Development and China’s implementation

The concept of sustainable development has experienced great development and change at different levels of theoretical connotation and practical implementation since 1960s and 1970s when it was first proposed. People’s understanding of the relationship between economy, society, and environment has been continuously deepened over the years. When it came to the end of 2015, it is necessary to examine the results of the United Nations Millennium Development Goals on sustainable development, and at the same time, the post-2015 framework and guidance on sustainable development at the global level were to be made, including the ideas, action plans, key areas that would guide the global sustainable development. The 2030 Agenda for Sustainable Development has developed a 5P theoretical framework of being people-centered, global environmental security, sustained economic prosperity, social justice and harmony and partnership promotion, including a political declaration, 17 overarching goals and 169 specific targets, specific ways of implementation, as well as the follow-up. It is the road map to achieve global sustainable development and meet the requirements of the millennium development goals. This paper summarizes the understanding of the concept of sustainable development from its origin, its significant development, to the proposition and development of the 2030 Agenda for Sustainable Development, and its strategic impact on China.     

Measurement of public awareness of climate change in China: based on a national survey with 4,025 samples

Just before the new round of UN climate change conference in Bonn, a survey report, named as the Climate Change in the Chinese Mind 2017, was released in Beijing. The investigation was conducted in the form of a computer-assisted telephone survey with a sample size of 4,025 samples, covering 332 prefecture-level administrative units and four municipalities in China. Urban-rural proportion and sex proportion were specially taken into account, so as to demonstrate the Chinese public awareness objectively. The investigation measures the public awareness from six aspects, which includes climate change beliefs, impacts, response, policies, actions, and the assessment of the effectiveness of climate communication. This article presents the key findings of the survey and provides further insights behind the data.     

长江中游城市群经济-城市-社会-环境耦合度空间差异分析

以长江中游城市群的36个城市为例,构建了经济发展、城市化、社会保障、生态环境综合评价指标体系,运用耦合度模型评估了36个城市2011~2013年的耦合度,并利用GIS技术分析系统的得分与耦合度的空间分布特征。结果表明:长江中游城市群的36个城市的经济发展、城市化和社会保障水平的空间分布比较相似,三者间存在显著的正相关关系。但是,存在显著性的地区差异。36个城市生态环境得分均值很高,城市之间差异很小。从耦合度的空间分布来看,长江中游城市群明显存在3个高耦合度的聚集区域,即长株潭城市圈,武汉-南昌(含鄂州、黄石和九江)城市带和鄂北4市,即十堰、襄阳、宜昌和荆门。最后,36个城市之间耦合度的差异呈现逐年缩小的趋势。     

Development of a fuel cell propulsion system for the existing Mercedes B-Class 160 of petrol driven car

This paper presents a theoretical comparison between fuel cell (FC) power train and conventional petrol driven propulsion system. FC has potential to reduce the CO₂-emissions from road. However, FC power trains require energy storing device, to meet the peak power during extreme drive situations and also able to recover the kinetic energy of the vehicle during break operation. The proposed system includes a polymer electrolyte membrane fuel cell (PEMFC) based drive train and a super capacitor connected in parallel. The system is designed and dimensioned for a conventional petrol driven propulsion system of the Mercedes B-Class160. The feasibility study also includes comparison between the existing conventional systems. It is shown that although FC power train is heavier compared to existing system, urban performance is better and produces no CO₂ and other harmful emissions.