Rate constants for the reaction of hydroxyl radicals with HFC-134a

ＲａｔｅｃｏｎｓｔａｎｔｓｆｏｒｔｈｅｒｅａｃｔｉｏｎｏｆｈｙｄｒｏｘｙｌｒａｄｉｃａｌｓｗｉｔｈＨＦＣ－１３４ａＺｈａｎｇＤｅｑｉａｎｇ，ＺｈｏｎｇＪｉｎｘｉａｎＲｅｓｅａｒｃｈＣｅｎｔｅｒｆｏｒＥｃｏＥｎｖｉｒｏｎｍｅｎｔａｌＳｃｉｅｎｃ...     

竖直弯管中含固体颗粒分散泡状流冲蚀预测

目的研究竖直弯管在含固体颗粒分散泡状流下的冲蚀规律,探究管内气液分布、颗粒分布及三维冲蚀形貌之间的关系。方法提出基于VOF模型和DPM模型的瞬态冲蚀数值计算方法,利用Oka等人提出的冲蚀模型及Grant和Tabakoff提出的颗粒-壁面碰撞模型计算管壁冲蚀速率。结果基于VOF和DPM模型的CFD冲蚀计算结果与经验模型及简化CFD模型的计算结果相比,更接近实验值。分散泡状流中,固体颗粒大部分分散在液相中,管道不同截面处的含液率与颗粒粒含量相关性较大,下游直管段和弯头处固体颗粒的粒含量大于上游直管段。含固体颗粒弯管在分散泡状流作用下,冲蚀区域较大,冲蚀最严重位置出现在弯头出口处附近。结论含砂分散泡状流冲蚀条件下,竖直弯管冲蚀形貌与管内气液固分布直接相关,多相流冲蚀瞬态仿真方法可较准确计算气液固分布并预测管道冲蚀。     

环境样品中痕量铅的流动注射在线分离及分光光度检测

1　IntroductionLeadiswellknownasoneofthemosttoxicmetalsandnotedinthefieldofenvironmentalchemistry[1 ] .Theleadconcentrationinnaturalwaterisextremelylow (sub μg·l-1 level)sothatsomepreconcentrationstepmustbeincludedtoassurethesensitivityofaconventionalin…     

鄂中丘陵地区农户生态系统能流分析

本文分析了鄂中丘陵地区一个典型农户生态系统的能流途径,人工辅助能的输入结构,各亚系统的能量输入、输出组成和能量流动关系,以及能量转化效率。以70个农户的样本分析研究了投能结构对能效的影响规律。结果表明,当地农户生态系统仍是一种以有机能为主要人工辅助的封闭性较强的能量转化系统;增加人工辅助能,特别是无机能的投入可以增加能量产出。     

流式细胞计分析海洋微微型浮游生物:样品固定及贮存方法

以流式细胞计为海洋微微型浮游生物的分析工具,研究了醛类固定剂的固定、液氮贮存对于微微型浮游生物的细胞大小、密度、藻红素荧光值(FL2)和叶绿素荧光值(FL3)的影响.实验主要结论为1)液氮环境适于贮存固定的微微型浮游生物样品,而未固定样品在液氮中贮存后细胞密度有损失;2)醛类固定剂对微微型浮游生物样品的细胞密度基本没有影响;3)醛类固定剂可增强微微型浮游生物的荧光强度,其中戊二醛主要影响聚球藻的FL2强度,多聚甲醛主要影响FL3强度.认为多聚甲醛是适用于微微型浮游生物的固定剂,推荐使用浓度为0.8%~1.2%,此外戊二醛浓度为0.05%、多聚甲醛浓度为0.8%~1.2%的混合固定剂亦适用于固定微微型浮游生物.图4参15     

On the selection of primary variables in numerical formulation for modeling multiphase flow in porous media

Selecting the proper primary variables is a critical step in efficiently modeling the highly nonlinear problem of multiphase subsurface flow in a heterogeneous porous-fractured media. Current simulation and ground modeling techniques consist of (1) spatial discretization of mass and/or heat conservation equations using finite difference or finite element methods; (2) fully implicit time discretization; (3) solving the nonlinear, discrete algebraic equations using a Newton iterative scheme. Previous modeling efforts indicate that the choice of primary variables for a Newton iteration not only impacts computational performance of a numerical code, but may also determine the feasibility of a numerical modeling study in many field applications. This paper presents an analysis and general recommendations for selecting primary variables in simulating multiphase, subsurface flow for one-active phase (Richards' equation), two-phase (gas and liquid) and three-phase (gas, water and nonaqueous phase liquid or NAPL) conditions. In many cases, a dynamic variable switching or variable substitution scheme may have to be used in order to achieve optimal numerical performance and robustness. The selection of primary variables depends in general on the sensitivity of the system of equations to the variables selected at given phase and flow conditions. We will present a series of numerical tests and large-scale field simulation examples, including modeling one (active)-phase, two-phase and three-phase flow problems in multi-dimensional, porous-fractured subsurface systems.     

Assessing microbial degradation of o-xylene at field-scale from the reduction in mass flow rate combined with compound-specific isotope analyses

In recent years, natural attenuation (NA) has evolved into a possible remediation alternative, especially in the case of BTEX spills. In order to be approved by the regulators, biodegradation needs to be demonstrated which requires efficient site investigation and monitoring tools. Three methods--the Integral Groundwater Investigation method, the compound-specific isotope analysis (CSIA) and a newly developed combination of both--were used in this work to quantify at field scale the biodegradation of o-xylene at a former gasworks site which is heavily contaminated with BTEX and PAHs. First, the Integral Groundwater Investigation method [Schwarz, R., Ptak, T., Holder, T., Teutsch, G., 1998. Groundwater risk assessment at contaminated sites: a new investigation approach. In: Herbert, M. and Kovar, K. (Editors), GQ'98 Groundwater Quality: Remediation and Protection. IAHS Publication 250, pp. 68-71; COH 4 (2000) 170] was applied, which allows the determination of mass flow rates of o-xylene by integral pumping tests. Concentration time series obtained during pumping at two wells were used to calculate inversely contaminant mass flow rates at the two control planes that are defined by the diameter of the maximum isochrone. A reactive transport model was used within a Monte Carlo approach to identify biodegradation as the dominant process for reduction in the contaminant mass flow rate between the two consecutive control planes. Secondly, compound-specific carbon isotope analyses of o-xylene were performed on the basis of point-scale samples from the same two wells. The Rayleigh equation was used to quantify the degree of biodegradation that occurred between the wells. Thirdly, a combination of the Integral Groundwater Investigation method and the compound-specific isotope analysis was developed and applied. It comprises isotope measurements during the integral pumping tests and the evaluation of delta13C time series by an inversion algorithm to obtain spatially integrated mean isotope values at the control planes. It was shown that the Rayleigh equation is applicable to spatially integrated mean isotope values in order to obtain the mean biodegradation between the consecutive control planes. All three approaches yielded consistently a 98-99% degradation of o-xylene.     

Axi-symmetric simulation of soil vapor extraction influenced by soil fracturing

Fracturing, either pneumatic or hydraulic, is a method to improve the performance of soil vapor extraction (SVE) in relatively low permeability soils (< 10(-5) cm/s). A two-dimensional model is presented to simulate trichloroethylene (TCE) soil vapor extraction modified by fracturing. Flow and transport is modeled using mobile macropore and micropore networks, which also have been identified in the literature as dual porosity, dual permeability, or heterogeneous flow models. In this model, fluids can flow in both the macropore and micropore networks. This represents a more general model compared to immobile micropore, mobile macropore models presented thus far in the literature for vapor flow and transport in two dimensions. The model considers pressure- and concentration-driven exchange between the macropore and micropore networks, concentration-driven exchange between the gas and sorbed phases within each network, and equilibrium exchange between the gas and water and a sorbed phase within each network. The parameters employed in an example simulation are based on field measurements made at a fractured site. Considered in the simulations were the influence of the volume percentage of fractures, the length of fractures, the relative location of the water table, and the influence of pulsed pumping. For these simulations, internetwork concentration-driven exchange most significantly affected mass removal. The volume percentage of fractures more significantly influence flow and mass removal than the length of fractures. The depth of the water table below the contamination plume only significantly influenced flow and mass removal when the water table was within 60 cm of the bottom of the contaminated soil in the vadose zone for the parameters considered in this study. Pulsed pumping was not found to increase the amount of mass removed in this study.     

新型湿式湍流除尘器及在电厂输煤系统中的应用

介绍了针对火电厂输煤系统作业环境粉尘治理而研制开发的新型湿式湍流除尘器的设计思路、设备结构、技术特点及在电厂输媒系统的应用情况。